Futaba FHSS2-24G Radio Control User Manual user manual revised
Futaba Corporation Radio Control user manual revised
Futaba >
User's Manual-Rev
FHSS2-24G 2.4GHz Module User Manual. Futaba corporation 1080 Yabutsuka Chosei-son Chosei-gun Chiba 299-4395 JAPAN 1. Features 2.4GHz Frequency Hopping Spread Spectrum (FHSS) radio transceiver module. Operates in the unlicensed worldwide ISM band (2.4 GHz to 2.483.5GHz) band Fully integrated power regulation with a wide input unregulated operating range 4.0 to 7.2V. Equipped Fully integrated local oscillator and 26MHz 20ppm reference crystal 100mA operating current Transmit power 40mW EIRP Receive sensitivity up to -95dBm FHSS data rates up to 500kbps 1/2 mile operating range 2. Pin assign Pin Number Name Description J103 1 I/O 1 Input/output 1 2 I/O 2 Input/output 2 3 I/O 3 Input/output 3 4 I/O 4 Input/output 4 5 I/O 5 Input/output 5 6 GND Module Ground J104 1 I/O 6 Input/output 6 2 I/O 7 Input/output 7 3 I/O 8 Input/output 8 4 I/O 9 Input/output 9 5 I/O 10 Input/output 10 6 I/O 11 Input/output 11 7 LED LED control output 8 Vcc Module power input 9 Vdd 3.3V Regulated power output 3. Specifications Parameter Value Units Storage temperature -20 ~ +80 Degrees Celsius Operating temperature -10 ~ +45 Degrees Celsius Transmit power (conducted) 16 max dBm Receive Sensitivity -95 dBm Input voltage 4.0 ~ 7.2 Volt Output voltage 3.3 Volt Transmit current 100 max mA 4. Module User Requirements 4.1 This module must be integrated into a device where the user cannot access the antenna connector and should not be able to remove or install the module. 4.2 Under a 2.14dBi antenna can be used with this module. The antenna must not exceed the gain and pattern of the standard dipole antenna. 4.3 The device must contain the following permanent labeling on the exterior of the device as follows: Contains FCC ID: AZPFHSS2-24G 4.4 The user manual of the device must contain the following paragraph: This device complies with part 15 of the FCC rules. Operation is subject the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. to Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400 GHz to 2.4835 GHz frequency range. 4.5 This module meets the requirements for a RF category mobile device that may be used at separation distances of more than 20cm from the human body. However if the module is placed into the host that is RF category portable, the FCC RF exposure requirements of the portable host must be properly \ addressed.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Create Date : 2010:10:21 11:20:10Z Creator Tool : PrimoPDF http://www.primopdf.com/ Modify Date : 2010:11:03 10:42:24+08:00 Metadata Date : 2010:11:03 10:42:24+08:00 Format : application/pdf Creator : SakumaS Title : Microsoft Word - user_manual_revised.doc Producer : PrimoPDF Document ID : uuid:bc49aa63-4ef8-4dd8-9dbd-3cc6c5c58813 Instance ID : uuid:4aae51d9-c4b6-4667-b9c1-d65aa89c126f Page Count : 3 Author : SakumaSEXIF Metadata provided by EXIF.tools