Futaba FP-PK-FM-75B Radio Control Transmitter User Manual

Futaba Corporation Radio Control Transmitter I

a href="https://usermanual.wiki/Futaba" itemprop="url"> Futaba >

Contents

User Manual II

50Functions(Initial screen) MENUUse the   or button to select themenu screen.Press the   button.Use the   or button to select thefunction.Press the   button. Calling the setup screen* When the direct call button is set,the setup screen is also called by thefollowing method: MENU SELECT DIRECT SELPress the   button.Press the button setat this function.* Calling from menu screen Use the   or   button toselect the setup item.*   blinks at the currentsetup item.(Initial screen)CarburetorServo hornBrake sideA slight clearance is required at the linkage, but thethrottle acceleration function acts to reduce the timelag caused by this clearance.Throttle acceleration (TH-ACCEL (Throttle system)Gasoline engine cars have a small time lag at both the forward side and brake sidebecause a certain clearance is necessary at the linkage. Reducing this time lag at thetransmitter side provides the same sharp response as electric motor cars.Operation- Operation near the throttle trigger neutral positionbecomes a sharp rise.- The forward and brake sides can be set separately.Set valueThe standard value (100% point) of this setup effects the operation amount set bythrottle EPA function.Setup itemsFWRD : Forward side accelerationamountBRAK : Brake side accelerationamount
51FunctionsThrottle acceleration adjustment(Preparation)- Select setup item "FWRD" and make the following ad-justments.1 (Forward acceleration amount adjustment)Use the (+) and (-) buttons to adjust the accel-eration amount."0": No acceleration"100": Maximum acceleration (Approximately 1/2 of the forward sidesteering angle)2 (Brake side acceleration amount adjustment)Select setup item "BRAK" by pressing the (DN)button once and use the (+) and (-) buttons toadjust the acceleration amount."0": No acceleration"100": Maximum acceleration (Brake side maximum steering angle)3 When ending adjustment, return to the initialscreen by pressing the (END) button 3 times.Adjustment buttons- Use the (+) and (-) buttons to makeadjustments.- Press the (+) and (-) buttons simulta-neously (approx. 1 sec) to return to theinitial screen.Forward acceleration amount0~100Initial value: 0Brake side acceleration amount0~100Initial value: 0
Download:
Mirror Download [FCC.gov]
Document ID856694
Application IDG/AzkcazJ3LkSyV42L7j2A==
Document DescriptionUser Manual II
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize124.96kB (1562046 bits)
Date Submitted2007-10-19 00:00:00
Date Available2007-10-19 00:00:00
Creation Date2002-08-10 00:50:15
Producing SoftwareAcrobat Distiller 4.05 for Macintosh
Document Lastmod2002-08-27 11:19:13
Document TitleUser Manual II
FCC ID Filing: AZPFP-PK-FM-75B

Navigation menu