Futaba FRH-SD06TU Low Power Radio Modem User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	122472
Application ID	loJLZPAroNgrR54UT9ewFg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.27kB (515921 bits)
Date Submitted	2000-10-25 00:00:00
Date Available	2000-10-25 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Acrobat PDFWriter 3.02 für Windows
Document Lastmod	2000-07-21 10:44:18
Document Title	Manual

Page i
Fcc Notlce
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications, Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense,
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation
Any unauthorized changes or modifications to this device not expressly approved by Futaba
Corporation of America could void the user‘s authority to operate the device and possibly
result in damage to the equipment and/or cause serious or fatal injuries to the operator or
nearby personnel.
This device is intended to be installed and used in accordance with the instructions contained
in this manual Failure to comply With these instructions could vord the user’s authority to
operate the device and possibly result in damage to the equipment and/or cause serious or
tatal injuries to the operator or nearby personnel,
@ luttaba Corporation of Amcntu kw. 990121 01
Page ii FRHSDOGTU Manual
Important Safety Information
The list of dangers, warnings and cautions in this section contain imponant information that
will help ensure safe operation ofthe system. Please read carefully and understand all of
these items. All installers, operators and maintenance personnel should read and understand
this information before installation, use, or maintenance of the FRH system.
The FRH system by itselfis not inherently dangerous. HOWEVERy WHEN THE FRH
SYSTEM IS CONNECTED TO OTHER EQUIPMENT FOR THE PURPOSE OF
CONTROL, SAFETY AND ALL POSSIBLE ASSOCIATED DANGERS MUST
ALWAYS BE GIVEN THE UTMOST CONSIDERATION DURING SYSTEM
INTEGRATION, DESIGN, INSTALLATION, AND IEE.
The FRH system may be used in vinually unlimited applications. Many of these assocrated
systems can, by themselves, pose a mechanical, electrical or other hamrd to operators and
other persons or equipment. To address all possible applications and associated safety
hazards in this manual would be impossible. The warnings below and throughout this manual
give you intorrnation that Will allow you to install and use the FRH system safely in most
applications, If you have questions regarding the safety of your specific application, please
contact the appropriate people tor help. Your Futaba sales representative, representatives of
the equipment you are controlling, and the technical suppon staff at Futaba Corporation of
America are among those who can give you assistance with your safety concerns,
The following warnings are included in the lists that follow but warrant repetition here:
In installations where the FRH system is used to control motion oroperation of potentially
dangerous equipment, it is imperative for safety that all operators and installers be
thoroughly trained in the normal function of that equipment before attempting to control it
remotely with the FRH system.
To help ensure safe operation of the equipment, the FRH system must be connected so that it
will operate in a fail-safe way. In other words, the equipment being controlled should stop or
return to its safest state in the absence ofa control signal or total loss of RF transmission
from the FRH modem, Our system uses one of the most reliable methods available to
transmit data using radio signals. Many factors can affect a radio signal that may block it or
interfere enough to disrupt regular transmission. Because of this, equipment motion or
dangerous electrical current, for example, that continues during a loss-of—signal condition
could be very dangerous.
Futaba Rev. 9901214”
Page iii
Four symbols are used in the margin of the following section and throughout the manual to
indicate the level ofhazard or information listed,
The symbols are defined as follows:
A NGER
Indicates a hazard that will cause severe personal injury, death, or
substantial property damage if the warning is ignored,
Indicates a hazard that can cause severe personal injury, death, or
substantial property damage if the warning is ignored,
Indicates a hazard that will or can cause minor personal injury, or
property damage if the warning is ignored.
Indicates installation, operation, or maintenance information that is
important but not hazard»related.
Please read the following safety information carefully Some of these notices are duplicated
throughout the manual, in areas of associated content, for your benefit
General Safety Hazards and Notes
Improper installation and/or operation of the FRH system can cause
serious or fatal injuries to the operator or nearby persons and cause
damage to the FRH system, and any equipment it is used to control,
Please read and understand this manual completely and the manual of
all equipment being controlled before attempting to operate or install
this system.
Always keep this manual at a location readily aceesstble to anyone
operating the system and related equipment. Ensure that all operators
have read and understood this manual, especially all safety and
operation procedures contained in it, Please refer to the section in this
manual titled How to Obtain Help for the contact that can supply you
with additional manuals or for questions not covered in this manual. If
this product is passed on to a different user, be sure that this manual
accompanies the product.
Be certain that the installer of this equipment reads and understands
the instruction manual of the equipment that you are connecting to
bctore attempting this installation.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res
Creator                         : 
Create Date                     : Freitag, 21. Juli 2000 10:22
Title                           : 
Author                          : 
Producer                        : Acrobat PDFWriter 3.02 für Windows
Subject                         : 
Modify Date                     : 2000:07:21 10:44:18
Page Count                      : 8

EXIF Metadata provided by EXIF.tools