Futaba T4PK-24G Radio Control User Manual

Futaba Corporation Radio Control

User manual

Download: Futaba T4PK-24G Radio Control User Manual
Mirror Download [FCC.gov]Futaba T4PK-24G Radio Control User Manual
Document ID902923
Application IDnoUAlLuv+DOZx0UiXAiznQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize17.81kB (222645 bits)
Date Submitted2008-02-17 00:00:00
Date Available2008-02-17 00:00:00
Creation Date2008-01-31 13:16:45
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2008-02-15 14:46:00
Document TitleMicrosoft Word - T4PK_R604FS_Instruction_Manual.doc
Document CreatorPScript5.dll Version 5.2
Document Author: nishizawa

T4PK-2.4G/R604FS
Radio Control
Instruction Manual
INTRODUCTION
Thank you for purchasing Futaba digital proportional R/C system. In order for you to make
the best use of your system and to use it safely, please read this manual carefully. If you
have any difficulties while using your system, please consult the manual, our online
Frequently Asked Questions (on the web pages referenced below), your hobby dealer, or the
Futaba Service Center.
Owner’s Manual and Additional Technical Help
This manual has been carefully written to be as helpful to you, the new owner, as possible.
There are many pages of setup procedures and examples. However, it need not be your sole
resource of setup guidelines. For example, the back cover includes a quick-start set of
instructions and the Frequently Asked Questions web page referenced below includes this
type of step-by-step setup instructions for a variety of other model types.
Due to potential unforeseen changes in production procedures, the information contained in
this manual is subject to change without notice. No part of this manual may be reproduced in
any form, at any time, without prior permission.
Support and Service: It is recommended to have your Futaba equipment serviced annually
during your hobby’s “off season” to ensure safe operation.
IN NORTH AMERICA
Please feel free to contact the Futaba Service Center for assistance in operation,
use and programming. Please be sure to regularly visit the Frequently Asked
Questions web site referenced below. This page includes extensive programming,
use, set up and safety information on your radio system and is updated regularly.
Any technical updates and US manual corrections will be available on this web page.
If you do not find the answers to your questions there, please see the end of our
F.A.Q. area for information on contacting us via email for the most rapid and
convenient response.
Don’t have Internet access? Internet access is available at no charge at most
public libraries, schools, and other public resources. We find internet support to be a
fabulous reference for many modelers as items can be printed and saved for future
reference, and can be accessed at any hour of the day, night, weekend or holiday. If
you do not wish to access the internet for information, however, don’t worry. Our
support teams are available Monday through Friday 8-5 Central time to assist you.
HOW TO SEND FOR SERVICE:
www.hobbyservices.com\techsupport\service-form-futaba.pdf
www.hobbyservices.com\techsupport\service-form-futaba.html
OUTSIDE NORTH AMERICA
Please contact your Futaba importer in your region of the world to assist you with
any questions, problems or service needs.
Please recognize that all information in this manual, and all support availability, is
based upon the systems sold in North America only. Products purchased elsewhere
may vary. Always contact your region’s support center for assistance.
The product is subject to regulations of the FCC and is restricted
under United States law to such purposes.
1. Exportation precautions:
(a) When this product is exported from the country of manufacture, its use is to be
approved by the laws governing the country of destination which govern devices
that emit radio frequencies. If this product is then re-exported to other countries,
it may be subject to restrictions on such export. Prior approval of the appropriate
government authorities may be required. If you have purchased this product from an
exporter outside your own country and not the authorized Futaba distributor
in your country, please contact the seller immediately to determine if such export
regulations have been met.
2. Modification, adjustment, and replacement of parts: Futaba is not responsible for
unauthorized modification, adjustment, and replacement of parts on this product.
Any such changes may void the warranty.
The Following Statement Applies to the Receiver (for U.S.A.)
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesirable operation.
Physical Description
Please review the following section and take a moment to familiarize yourself with the
T4PK-2.4G/R604FS .
T4PK-2.4G (Transmitter)
Pulse position data
Data frame
1ch
2ch
Data frame
3ch/RESET
1ch
2ch
3ch/RESET
Table 2 Pulse position data
Item
【1ch】
【2ch】
【3ch/RESET】
minimum
center
maximum
Remarks
800us
800us
1500us
1100us
1100us
1400us
1400us
1100±300us
1100±300us
1800us
2100us
1800±300us
Including Features
1. High response system (HRS)
2. Five-contact jog button used at the edit buttons
3. Model memory for 20 models
4. Two function selection modes: Menu selection and direct selection
5. Menu customizing
6. Brake mixing for large cars (BRAKE)
7. Anti-skid braking system (A.B.S)
8. Throttle acceleration (ACCEL)
9. Throttle speed (THSPD)
10.Start function (START)
etc
R604FS (Receiver)
Pairing method
1. Power on T4PK
2. Power on R604FS then green LED is blinking ,push frequency SW 1sec.
3. The red LED is blinking and then pairing completed the LED turn to
Green lighting.
frequency sw
Frequency Allocation
The T4PK-2.4G/R604FS can operate on 36(or22) available frequencies between
2405.376 MHz and 2477.056 MHz with 2.048 MHz separation between each frequency.
See the table below for the exact frequency assignments.
Channel
№
02
04
06
08
10
12
14
16
18
20
22
24
26
28
30
32
34
36
Table 3 :Frequency Channel
Frequency
Channel
Frequency
(MHz) №
(MHz)
2405.376
38
2442.240
2407.424
40
2444.288
2409.472
42
2446.336
2411.520
44
2448.384
2413.568
46
2450.432
2415.616
48
2452.480
2417.664
50
2454.528
2419.712
52
2456.576
2421.760
54
2458.624
2423.808
56
2460.672
2425.856
58
2462.720
2427.904
60
2464.768
2429.952
62
2466.816
2432.000
64
2468.864
2434.048
66
2470.912
2436.096
68
2472.960
2438.144
70
2475.008
2440.192
72
2477.056
Specification
T4PK-2.4G SPECIFICATIONS
1 Radio Characteristics
Engineering standard
Part 15.247 FCC(U.S.)
ETSI EN 300 328
100mW EIRP
Direct-Sequence Spread-Spectrum & Frequency Hopping
Single communication
2405.376MHz - 2477.056MHz
36/22
136 kbps
1.6MHz
Crystal controlled frequency synthesizer
1/2λ Pencil type antenna 1.3dBi
150m
RF power output
Modulation
Communication scheme
Frequency band
Channel
Data barer rate
6 dB bandwidth
Frequency control
Antenna
Operating Distance
2 Radio communication control
Error checking
CRC-CCITT
3 Power Supplying
Supply voltage
6.0V DC
Current consumption
200 mA
5 Environmental
Operating temperature
-10 to +45 ℃
Storage temperature
-20 to +60 ℃
6 Miscellaneous
Indicator
Frequency setting
Memory register
Case
Outer dimensions
Weight
R604FS SPECIFICATIONS
1 Radio Characteristics
Engineering standard
LCD display , 7 color LED
programable
Rewritable times: approx. 1 million times
Plastic
166.5 (W)×134.2(D)×248.95(H)mm
Aprox. 650g
Part 15.247 FCC(U.S.)
ETSI EN 300 328
2405.376MHz - 2477.056MHz
36/22
136 kbps
Crystal controlled frequency synthesizer
1/4λ mono pole type antenna
150m
Frequency band
Channel
Data barer rate
Frequency control
Antenna
Operating Distance
2 Radio communication control
Error checking
CRC-CCITT
3 Terminal interface
Physical interface
15 pins
4 Power Supplying
Supply voltage
6V DC
Current consumption
80 mA
5 Environmental
Operating temperature
-10 to +45 ℃
Storage temperature
-20 to +60 ℃
6 Miscellaneous
Indicator
2 color LED
Memory register
Rewritable times: approx. 1 million times
Case
Plastic
Outer dimensions
26(W)×40(D)×14.5(H)mm
Weight
Aprox. 14g
INSTRUCTIONS MANUAL
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used according to the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which it found by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet other than the receiver’s
-- Consult the dealer or an experienced radio/TV technician for assistance.
CAUTION:
To assure continued FCC compliance:
(1) Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
FCC Label Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Exposure to Radio Frequency Radiation
To comply with FCC RF exposure compliance requirements, a separation distance of at
least 20cm must be maintained between the antenna of this device and all persons. This
device must not be co-located or operating in conjunction with any other antenna or
transmitter.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:a91a9622-d053-432c-bc0e-380849c556d0
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:01:31 13:16:45+09:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:02:15 14:46:00+08:00
Metadata Date                   : 2008:02:15 14:46:00+08:00
Document ID                     : uuid:42a66484-258f-4c84-8307-7b967c7dcf27
Format                          : application/pdf
Title                           : Microsoft Word - T4PK_R604FS_Instruction_Manual.doc
Creator                         : nishizawa
Author                          : nishizawa
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AZPT4PK-24G

Navigation menu