GIT G1NZFMN012 Scan Tool User Manual

G.I.T Co.,Ltd. Scan Tool

User Manual

User Guide_HardwareGVCI component1Component
GVCIUnlock ButtonExternal PortBluetooth Button◈GVCISpecificationSpecificationItemMicro ControllerSystem MemoryOperating VoltageUser Guide_HardwareUnlock ButtonUnlocks GVCI from OBD-II connectorExternal PortCommunication port for Tablet PC(Optional)Bluetooth ButtonEnables Bluetooth modeSpecificationsARM 32-bit Cortex™-M4 / 180MHzFlash Memory 2Mbyte / SRAM2567~30VDC2II connector(Optional)0MHz256KByte
Temperature OperatingStorageRelativeHumidityOperatingStorageOperating ModeCurrent ConsumptionHousingDimensionWeightInterfaceItemWire ProtocolWireless ProtocolIndication LampsInput DevicesGVCI (G-scan tabVehicle Communication Interface)◈GVCI LEDColor Description[Blue on]:Connection in Ready status[Blue flashing]:ItemCANK-Line/L-LineCommercial VehicleData/Control LineUser Guide_Hardware-10℃ ~ 50℃ (14℉ ~ 122℉) : Wireless LAN Mode-10℃ ~ 55℃ (14℉ ~ 131℉) : USB Mode-20℃ ~ 80℃ (-4℉ ~ 176℉Noncondensing @ 0℃ ~ 10℃ (32℉95%RH @ 10℃ ~ 30℃ (50℉~ 8670%RH @ 30℃ ~ 55℃ (86℉~ 131Noncondensing @ -20℃ ~ 80℃ (-4℉Diagnosis Function / Flight Record FunctionTypical 100mA @12VABS58 X 74 X 36 mm90gSpecificationsUSB 2.0 Full Speed via 30-pin ConnectionBluetooth 2.1 (2.4GHz )1 LEDs(Front)Input keyVehicle Communication Interface)Color DescriptionConnection in Ready status–GVCI Is not connected with]:GVCI is connected with G-scan TabSpecificationsCAN (High Speed, Low Speed,Single SpeedISO-9141, ISO-9141-CARB, KWP-2000SAE-J1708/J1587,J1850(VPWM,PWM)Melco Pull-Down3) : Wireless LAN Mode) : USB Mode℉)℉~ 50℉)~ 86℉)~ 131℉)℉~ 176℉)Diagnosis Function / Flight Record Functionpin ConnectionGVCI Is not connected withG-scan TabSingle Speed)2000/J1587,J1850(VPWM,PWM)
[Green flashing]:Vehicle communication in process◈How to connect with vehicleConnect GVCI connector with OBDUser Guide_HardwareVehicle communication in processHow to connect with vehicleConnect GVCI connector with OBD-II port of vehicle.4
AppendixChanges or modifications not expressly approved by the party responsible forcomplianceCould void the userThis device complies with part 15 of the FCC Rules.Operation is sufollowing two conditions:(1)This device may not cause harmful interference, and(2)this device must accept any interference received, including interference that maycauseundesired operation.NOTE:This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableUser Guide_HardwareAppendixChanges or modifications not expressly approved by the party responsible forcomplianceCould void the user’s authority to operate the equipment.This device complies with part 15 of the FCC Rules.Operation is sufollowing two conditions:This device may not cause harmful interference, andthis device must accept any interference received, including interference that maycauseundesired operation.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable5AppendixChanges or modifications not expressly approved by the party responsible fors authority to operate the equipment.This device complies with part 15 of the FCC Rules.Operation is subject to thethis device must accept any interference received, including interference that mayThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. Thuses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmfulguarantee that interference will not occurcause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged tomore of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.Consult the dealer or an experienced radio/TV technician for help.Indication of any restrictions of useThis equipment was restricted to indoor use.Indication of the countries where the equipment is intended to bo usedThis equipment may be operated inLU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TRThis product is CE marked according to the provision of the RHere by G.I.T co., Ltd.. declares that this product in compliance withand other relevant provisions of DirectiveWEEE (Waste Electrical and Electronic Equipment) symbol shown in [Figure 1] is indicated on theback of the VCI main module, VMI main module, andPlease follow the regulation guide for disposal of Waste Electrical and Electronic Equipment. Usecaution disposing of the Trigger module; it contains a lithium battery. Users must follow theregulations when replacing or discarding this bUser Guide_Hardwareprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmfulinterferenceto radio communications. However, there is noguarantee that interference will not occurin a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged totry to correct the interferenceollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isperienced radio/TV technician for help.Indication of any restrictions of useThis equipment was restricted to indoor use.Indication of the countries where the equipment is intended to bo usedThis equipment may be operated inAT, BE, CY, CZ, DK, EE, FI,FR, DE, GR, HU, IE, IT, LV, LT,LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TRThis product is CE marked according to the provision of the RED( 2014/53/EU).Here by G.I.T co., Ltd.. declares that this product in compliance withthe essential requirementsand other relevant provisions of Directive2014/53/EUWEEE (Waste Electrical and Electronic Equipment) symbol shown in [Figure 1] is indicated on theback of the VCI main module, VMI main module, andTrigger module.Please follow the regulation guide for disposal of Waste Electrical and Electronic Equipment. Usecaution disposing of the Trigger module; it contains a lithium battery. Users must follow theregulations when replacing or discarding this battery.6is equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withto radio communications. However, there is noin a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningtry to correct the interferenceby one orConnect the equipment into an outlet on a circuit different from that to which the receiver isFR, DE, GR, HU, IE, IT, LV, LT,the essential requirementsWEEE (Waste Electrical and Electronic Equipment) symbol shown in [Figure 1] is indicated on thePlease follow the regulation guide for disposal of Waste Electrical and Electronic Equipment. Usecaution disposing of the Trigger module; it contains a lithium battery. Users must follow the
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and otherEuropean countries with separate collection systems)This symbol on the product or on its packaging indicates that this product shhousehold waste. Instead it shall be handed over to the applicable collection point for therecycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,you will help prevent potential negativewhich could otherwise be caused by inappropriate waste handling of this product. The recyclingof materials will help to conserve natural resources. For more detailed information about recyclingof this product, please contact your local city office, your household waste disposal service or theshop where you purchased the product.User Guide_HardwareFig. 1. WEEE SymbolDisposal of Old Electrical & Electronic Equipment (Applicable in the European Union and otherEuropean countries with separate collection systems)This symbol on the product or on its packaging indicates that this product shall not be treated ashousehold waste. Instead it shall be handed over to the applicable collection point for therecycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,you will help prevent potential negativeconsequences for the environment and human health,which could otherwise be caused by inappropriate waste handling of this product. The recyclingof materials will help to conserve natural resources. For more detailed information about recyclingoduct, please contact your local city office, your household waste disposal service or theshop where you purchased the product.7Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and otherall not be treated ashousehold waste. Instead it shall be handed over to the applicable collection point for therecycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,consequences for the environment and human health,which could otherwise be caused by inappropriate waste handling of this product. The recyclingof materials will help to conserve natural resources. For more detailed information about recyclingoduct, please contact your local city office, your household waste disposal service or the

Navigation menu