G4S Technology PENDTUUSB ProxiPen DTU USB Data Terminal Unit User Manual Manual

G4S Technology Limited ProxiPen DTU USB Data Terminal Unit Manual

Manual

Installation and User Instructions for the GCS USB-DTU®If you are using the USB interface, connect a standard A-to-B USB cable to the unit.If you are using the RS232 interface, connect a 9-pin modem-type serial cable to the unit. Whenusing the RS232 interface, an external 9-volt power supply must also be connected to the 2.5mmJack socket.1Installing the DTUCommunications between the Proxy Pen and DTU is wireless and simply requires the pen to beplaced in the cradle at the top of the DTU.To download data from the Proxy Pen, please refer to the Top Guard or WinDau software manual.2Using the DTUThis leaflet provides user and installationinstructions for the Universal Serial Bus(USB) version of the ProxiPen DataTermination Unit (DTU). The unit isequipped with both a 9-pin RS232 port anda USB port, enabling the unit tocommunicate with a PC running the WinDauor Top Guard software through either port.When using the RS232 port, the unit mustbe powered from a separate 9Vdc powersupply. When using the USB port, power isprovided through the USB cable.About the LEDsPowerPenModemDataOnline– Lit when you connect the external 9Vdc power supply or USB cable from the PC– Lit when the Proxy Pen is in the cradle and communicating with the DTU.– Lit if the DTU recognizes a modem connected to its RS232 port.– Lit when data is being transferred from the Proxy Pen to the DTU, or vice versa.– Lit when you connect the DTU to a PC. If you are connecting via the USB port, thePC must have the Top Guard or WinDau software installed for the LED to illuminate..SpecificationsExternal supply (only when RS232 connectionused): 9Vdc.Input current; 30mA.Operating temperature: 32 to 95 F (0 to 35 C).Operating humidity: 15 to 90%, non-condensing.Approvals: EN300 330, R&TTE.°°9600-0391. Installation and User Instructions for the USB DataTermination Unit, Issue 1.0x2 14th January 2004. General ControlSystems, 2004.All trademarks acknowledged. GCS is a trademark of General ControlSystems.FCC Notice: This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This devicemay not cause harmful interference, and (2) this device must acceptany interference received, including interference that may causeundesired operation.Any unauthorized modification to this device may void the authority ofthe user to operate it.©

Navigation menu