GAODASHANG INFORMATION TECHNOLOGY DZ09 Smart Watch User Manual

SHENZHEN GAODASHANG INFORMATION TECHNOLOGY CO., LTD Smart Watch

User Manual

Download: GAODASHANG INFORMATION TECHNOLOGY DZ09 Smart Watch User Manual
Mirror Download [FCC.gov]GAODASHANG INFORMATION TECHNOLOGY DZ09 Smart Watch User Manual
Document ID3092630
Application ID4ZJmpHyPRHItufSR0rT3Zw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize47.12kB (588959 bits)
Date Submitted2016-08-09 00:00:00
Date Available2016-08-09 00:00:00
Creation Date2016-08-04 10:46:59
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2016-08-04 10:46:59
Document TitleUser Manual
Document CreatorMicrosoft® Office Word 2007
Document Author: Antonio J. Gutiérrez

PROSCANPBTW360
SMART WATCH
USE MANUAL
Please read the manual before use
USE MANUAL FOR SMARTWATCH
PBTW360
1. SAFETY WARNING









Before use, please read the user manual carefully.
Only support the standard battery, charger and accessories
we approved, we won’t take any responsibility for any
consequences caused by the use of third party accessories.
Prohibit the unauthorized dis-assembly of watch phone.
No mechanical vibrating and shaking. No kicking the screen
by tool.
No using solute to clean the shell, such as benzene, thinner
or alcohol. No touching the watch phone with corrosive
chemicals and so on, but with a clean textile to clean it softly.
No exposing the watch phone under the sunrise or the place
with smog and dust.
Keep the phone in dry. No using in the wet environment
such as bathroom. This watch is not water proof and is
strictly prohibited to rain and moisture.
Please put the watch phone in a safety place out of the
reach of children to avoid any dangerous happening. The
information in this document won't be modified or extended
in accordance with any notice.
The watch should be charging 2 hours at least before use.
2. PRODUCT DETAILS
2.1 Product details



Power button: Power on / off by long press the button,
Awaken / turn off the screen, Back to main menu by short
press.
USB port: Charging
Touch screen: each function (main menu) will be shown and
displayed.
2.2 Products quick into
You can enter into next page by sliding screen to the left, and return
to last page by sliding screen right, enter into the notice board after
sliding from up to down, and return to main mean from down to up.
It will be in mistake for a click if the drag distance too short.
2.3 Clock Display
Setting Method:
Power on, when the phone in clock mode, please click middle
screen to choose the desired clock interfaces.
3. PRODUCT QUICK USE
3.1 Download the sync software
Scan below QR code to download the APP(only for android phone).
If you downloaded thesoftware before, please check if the version is
the newest one to ensure all function normal use. And please
update the software when have new version.
3.2 Install and use the sync software
Android Application installation:
Please install the android application in your smart phone. You can
storage it into your phone memory or install by Sync assistant.
Android applications usage(already installed):
(Smart phone) Setting - Accessibility - Enter into Bluetooth notice
(service), enabled this service, (please choose "sure" when shown a
warning notices) the application runs on the background
automatically.
Click the Bluetooth notice and choose the Notification service,
select your Personal or System application in Notify application.
Telephone service in including SMS, incoming call and seek watch.
Notice:
Please don’t shut the Bluetooth notify service when you are clearing
software by background or close background application software.
It will affect the Sync function between watch and phone if shut it.
3.3 Bluetooth connectivity and sync function
3.3.1 From phone to Watch
Phone settings - turn on bluetooth - search for devices, please click
pair devices when found the watch, and also choose "yes" in your
mobile phone, paired done.( The Bluetooth device name is
PROSCAN-PBTW360)
Please choose "sure" when there is phone book request, meanwhile
you’d better to choose "no remind again", this is convenience when
you connect next time (without remind again).
3.3.2 From watch to phone
BT Dialer-Search new device-found your smart watch (such as
s9500)-connect.
Note:the mobile phone need to turn on the bluetooth and allow to
be searched by around bluetooth products.
3.4 Basic Functions




Message: Sync phones or watch message.
Bluetooth: Set the Bluetooth, turn on / off.
Call logs: You can check your phone call records after you
connect with the Bluetooth. Shown all records including
miss call, dialed calls and receive call. You can check the date,
time and phone number of the miss call after you choose it,
but only can call this number.
Remote Notifier: When there is SMS, incoming messages
from QQ and other applications on the connected phone,
the watch phone will alert you to read them.










Remote capture: Use phone camera take pictures; but
remote by watch. Its need switch on the camera of phone in
advance.
Anti lost: Watch seek phone, or phone seek watch.
Setting: Notice-sets clocks display and theme in phone
setting; In the security Settings, the safe code Is 1122
Pedometer: It can be adopted as a tool to avoid insufficient
or excessive exercise by measuring calories of calories
consumption based on collected data, such as number of
steps, distance, speed, time, etc to control exercise. If you
want return to main menu but keep pedometer during the
exercise, please press the power button.
Sleep Monitoring: Show your sleep quality base on your
sleep times.
Sedentary Remind: You can set a time to remind you up to
do some exercise, we suggest you this time could be one
hours.
Quick response: It can download sync software when scan
the quick response, if there Is a new version need to update,
please contact with our servicer, our company will provide a
new link for your download.
Audio Player: Can play music from local or smart phone
after connected with Bluetooth.
Browser: Browser need your phone has SIM card and surf
the Internet.
You can also haveAlarm/Calendar/Calculator/Profiles/File
Manager/Camera/Image
viewer/Sounder
recorder
functions.
NOTICE


Full charge before use, the charge time need 1-2 hours.
Bluetooth will disconnect when exceed the distance (up to
10 meters), after switch on the Anti lost, the smart search
function can’t be use before reconnect with Bluetooth.
NOTE: The effectiveness of all functions can be affected by
the level of battery charge.
5. COMMON TROUBLE SHOOTING
Please refer below key functions for any problems with the watch.





Unable to switch on: The time of press the power button
too short, please keep it more than 3 seconds. Low power,
please charge it.
Shut down automatic: Low Power, please charge the watch.
Using time too short: Battery Is not full, please make sure it
Is full power (full charge need 2 hours at least). During the
use of SIM card, the power will be run off soon if the signal
too poor.
Unable to charge: The battery's life will be reduce after few
years, please check if the battery are work. Change a new
charger if it Is unworkable. Please check the USB slot
connecting good, If no, please try again.
Not caller's name when incoming call: Forgot to choose
upload the phone book when connected with BT, or
unselected keep upload the phone book. Forgot to sync the

phone book when reconnected, please pair the device and
connect BT again.
Bad phone call voice: Watch and phone are separated too
far, please be more close; Bad signal of BT. Bad signal of
your own phone call place, please change a more better
place for phone call.
6. MAIN FEATURES










CPU: MTK6261D, 108 Mhz.
Mobile phone 2G GSM 850/900/1800/1900
Capacitive touch screen 1.54” 240*240 Pixs.
Bluetooth 2.1.
RAM/ROM:32MB/32MB.
Support TF card (up to 32 GB)
0.08 MPX camera.
Battery 380 MAh Li-Battery.
Micro SIM card slot.
Speaker, microphone, multi languages.
Federal Communications Commission (FCC)
Interference Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help.
Note: Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
This mobile device meets guidelines for exposure to
radio waves. Your mobile device is a radio
transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves recommended
by international guidelines.
The SAR limit adopted by USA and Canada is 1.6
watts/kilogram (W/kg) averaged over one gram of
tissue. The highest SAR value reported to the
Federal Communications
Commission (FCC) and the Industry Canada (IC) for
this device type when it is tested for use at the
mouth is 0.045 W/kg, and that when it is properly
worn on the wrist-worn is 1.003 W/kg.
The device complies with the RF specifications when
the device is used near your ear or at a distance of
1.0 cm from your mouth. Ensure that the device
accessories such as a device case and a device
holster are not composed of metal components. Keep
your device 0 cm away from your wrist-worn to meet
the requirement earlier mentioned.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Antonio J. Gutiérrez
Create Date                     : 2016:08:04 10:46:59+08:00
Modify Date                     : 2016:08:04 10:46:59+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2016:08:04 10:46:59+08:00
Creator Tool                    : Microsoft® Office Word 2007
Format                          : application/pdf
Creator                         : Antonio J. Gutiérrez
Document ID                     : uuid:71486f17-7656-4a57-92b6-37668de44bee
Instance ID                     : uuid:abf26adb-9148-4040-99bd-d88b7bb62492
Producer                        : Microsoft® Office Word 2007
Page Count                      : 12
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AI8NDZ09

Navigation menu