GE MDS DS-ENET900SR ENET SERIAL REMOTE User Manual ENET professional install

GE MDS LLC ENET SERIAL REMOTE ENET professional install

Contents

PRO INSTALLATION LETTER

175 Science Parkway, Rochester, New York 14620 USA (585) 242-9600 Phone (585) 242-9620 Fax May 22 2003 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. Subject: FCC part 15 unlicensed transmitter Professional installation request. Applicant: Microwave Data Systems Inc. Product: ENET Serial Remote Model: ENET900SR FCC ID: E5MDS-ENET900SR Dear Sir/Madam, The MDS ENET family of products is a Professional Installation Radio System and must be Installed by Trained Professional Installers, or Factory Trained Technicians. MDS has distributors, channel partners, and a field service department, that have all been trained in “Professional Installation” of part 15 unlicensed products. These products are NOT for sale to the general public and used for industrial applications where professional installers are used the system planning for path loss, cable selection, and antenna gain calculations. Our manual and all sales brochures will clearly list this system as “professional installation” is required. Below is an excerpt from our manual This section is designed to aid the professional installer in the proper methods of maintaining compliance with the FCC part 15 limits and the +36 dBm or 4 Watts peak E.I.R.P. limit If you have any queries, please do not hesitate to contact me at 585 242-8440: Yours truly, Dennis McCarthy Agency Compliance Engineer Microwave Data Systems 175 Science Parkway Rochester NY 14620 Phone (585) 242-8440 Email dmccarthy@microwavedata.com

Navigation menu