GE MDS DS-LN200 Industrial Radio Module User Manual
GE MDS LLC Industrial Radio Module
a href="https://usermanual.wiki/GE-MDS" itemprop="url">
GE MDS >
User Manual
| Download: | |
| Mirror Download [FCC.gov] | |
| Document ID | 3371840 |
| Application ID | 2tViBThCJbL3iGExO6Mckw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 26.92kB (336555 bits) |
| Date Submitted | 2017-04-26 00:00:00 |
| Date Available | 2017-04-27 00:00:00 |
| Creation Date | 2017-04-12 15:22:21 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2017-04-12 15:22:21 |
| Document Title | Microsoft Word - MDS LN200 Integrators Guide rev 2.docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | dguidotti |
![MDSLN200Integrator’sGuide 05‐6949A01,revision2[1]MDSLN200Integrator’sGuide1.0INTRODUCTION The LN200 (Figure 1), is a fixed location (not intended for mobile use), multi-modem system operating in licensed bands between 216-222MHz, using channel bandwidths of 6.25kHz, 12.5kHz, and 25.0kHz. Modulation choices for each bandwidth include CPFSK, QPSK, 16QAM, and 64QAM. Maximum power and modem speed is based on frequency, modem choice, and applicable emission mask. The unit is designed for use inside data equipment to provide reliable connectivity in wireless networks. The LN200 power control circuit ensures that the RF output is linear and never exceeds +41.3 dBm at the antenna connector. The module is designed for OEM use only. Host systems must be professionally installed. Host systems must be factory configured by the OEM to operate at the correct frequency and output power setting. Refer to the table at the end of this guide to determine applicable antenna types and the RF output power allowed. 1.1TransceiverFeaturesThe LN200 maximizes performance and flexibility in wireless networks, offering the following key features: Selectable frequency (216-222MHz) Selectable bandwidth (6.25kHz, 12.5kHz, 25.0kHz) Selectable modem choices (CPFSK, QPSK, 16QAM, 64QAM) RSSI and EVM readback indicators Store-and-Forward repeater operation Same hardware for Master, Remote, or Store-and-Forward configurations Supports RS/EIA-232(TTL), Ethernet, and USB user interfaces Operates at 5.25 VDC at the MiniPCIe card edge power connections and 10-60Vdc at the 3-pin power connector. Figure 1. LN200 Transceiver Module (Mini PCI-Express Card Edge for Data/Power/& I/O and J700 Antenna) NOTE: Some features may not be available on all units, based on the options purchased, or regulatory constraints in the country of operation.](https://usermanual.wiki/GE-MDS/DS-LN200.User-Manual/User-Guide-3371840-Page-1.png)