GE Power Electronics BLST-SP77X Electric Discharge Lamp Control Equipment User Manual X82 BLST SP77X Rev1

Download:
Mirror Download [FCC.gov]
Document ID	1378855
Application ID	paEPdslP/NK7J717QsI7NQ==
Document Description	X82-BLST-SP77X_User Manual_Rev1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.67kB (145855 bits)
Date Submitted	2010-11-19 00:00:00
Date Available	2010-11-22 00:00:00
Creation Date	2010-11-19 15:27:28
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2010-11-19 15:27:28
Document Title	Microsoft Word - X82-BLST-SP77X_User Manual_Rev1.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Zeno Gu

Electronic Ballast For Electrodeless Fluorescent Lamp
1．Product code.
150W
SP779#
200W
SP780#
Note: # means the model designation may be followed by suffix.
2．Outside characteristic.
The outside picture of Electronic Ballast For Electrodeless Fluorescent Lamp as below,
there are three wires at input port, L line is blue，N line is gray, GND line is yellow and green.
There are two white wires at output port. The input wires connect to the power grid, and the
output wires connect to the Electrodeless Fluorescent Lamp.
Outside picture
Inside picture
Size：
Size picture
3．Electrical characteristic.
1) Input Voltage: 90-150Vac
2）Input Rating Current
1.5A @120V--electrodeless lamp 150W
1.9A @120V--electrodeless lamp 200W
3）Output Rating Current
0.81A (load,electrodeless lamp 150W)
0.96A (load,electrodeless lamp 200W)
4）Output Rating Voltage
190V (load,electrodeless lamp 150W)
210V (load,electrodeless lamp 200W)
5）Start Trigger Voltage
2000±100Vop (load,electrodeless lamp 150W)
2350±100Vop (load,electrodeless lamp 200W)
6）Output Frequency
230K±30kHz(load,electrodeless lamp 150W)
230K±30kHz(load,electrodeless lamp 200W)
7）Open circuit and short circuit protection
4．Ambient temperature.
Generally the ballast is set up in the lamps and lanterns to use, the ambient temperature of
ballast is -40--60℃ in lamps and lanterns.
FCC STATEMENT:
This light device has been tested and found to comply with the limits for Consumer
RF Lighting device, pursuant to Part 18 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
This product may cause interference to radio equipment and should not be installed
near maritime safety communications equipment or other critical navigation or
communication equipment operating between 0.45 – 30MHz.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:11:19 15:27:28+08:00
Create Date                     : 2010:11:19 15:27:28+08:00
Format                          : application/pdf
Title                           : Microsoft Word - X82-BLST-SP77X_User Manual_Rev1.doc
Creator                         : Zeno Gu
Document ID                     : uuid:fc99f18d-454d-43fd-af82-6d7614f40a54
Instance ID                     : uuid:62936000-1a4f-4d10-860c-e16a36522d18
Page Count                      : 3
Author                          : Zeno Gu

EXIF Metadata provided by EXIF.tools