GEMMY 113687 Orchestra of Lights-Light String User Manual 112861

Download:
Mirror Download [FCC.gov]
Document ID	3904793
Application ID	gNwQ7ks+PChHncRoP2dcEw==
Document Description	User manual 112861
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	164.65kB (2058120 bits)
Date Submitted	2018-06-28 00:00:00
Date Available	2018-06-28 00:00:00
Creation Date	2014-02-28 10:17:04
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2018-06-21 09:18:19
Document Title	User manual 112861
Document Creator	Adobe InDesign CS6 (Macintosh)

E pg.1
LE D LIG HT S HO W
IN STRU C T I ON S
Congratulations! You are now the proud owner of a LED LIGHTSHOW. Please read the direc-
tions carefully before use.
SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should
be discarded.
SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units.
WARNING
ELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years of age. As with all electrical products,
precautions should be observed during handling and use to reduce the risk of electric shock. If the supply cord is damaged, it must
be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING
Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used
in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. lf one is not provided,
contact a qualified electrician for proper installation.
2. This seasonal use product is not intended for permanent installation or use.
3. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
5. Do not let lamps rest on the supply cord or on any wire.
6. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
7. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with
or placed where small children can reach it.
8. Do not use this product for other than its intended use.
9. Do not hang ornaments or other objects from cord, wire, or light string.
10. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
11. Do not cover the product with cloth, paper or any material not part of the product when in use.
12. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse
blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the
product. Replace the fuse as per the user servicing instructions(follow product marking for proper fuse rating)and check the
product. lf the replacement fuse blows, a short-circuit may be present and the product should be discarded.
13. Read and follow all instructions that are on the product or provided with the product.
CAUTION: To reduce the risk of fire and electric shock:
Do not mount or support wires in a manner that can cut or damage wire insulation.
SAVE THESE INSTRUCTIONS
pg.2
USE AND CARE INSTRUCTIONS
1. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation
or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
2. When storing the product, carefully remove the product from wherever it is placed, to avoid any undue strain or stress on
the product conductors, connections, and wires.
3. When not in use, store neatly in a cool, dry location protected from sunlight.
USER SERVICING INSTRUCTIONS
To replace the fuse:
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
3. Remove fuse carefully. Turn fuseholder over to remove fuse.
4. RISK OF FIRE. Replace fuse only with 3 Amp, 125Volt fuse (provided with product.)
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6. RISK OF FIRE. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
CAUTION
This string is rated 24 Watts ( 0.2Amps ), do not overload. Connect other Lighting Strings or decorative outfits end-to-end up
to a maximum of 216 Watts (1.8 Amps) total.
If connecting to a lighting string that does not have a wattage (W) rating (found on the tag within 6 inches of the plug),
Calculate The wattage (W) as follows: Multiply the current (0.2A) which is on the flag type tag Within 6 inches of the plug,
by 120.
For example, string is rated 120V, 60Hz, 0.2Amps, 0.2×120=24 Watts.
Add the wattage of each light string together for a total of 210 Watts or less. (Do not exceed 216 Watts)
Total amount of wattage that can be connected 216W-24W=192W.
CAUTION
To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify string.
FOR INDOOR AND OUTDOOR USE
PACKAGE CONTENTS
Topper
Pole
Stake
Extra fuse, 3A,125V
16
pieces
pieces
pieces
pieces
PREPARATION
Before beginning assembly, remove all parts from carton. Compare parts list and diagram above. If any part is missing or
damaged, do not attempt to assemble or use the product.
•Estimated assembly time: 10-15 minutes.
ASSEMBLY INSTRUCTIONS
1. Set out all contents on a clear, flat surface.
2. Begin assembly by securing the stake into the ground.
3. Screw the pole into the stake.. (see illustration)
4. Attach the topper onto the pole.
5. Repeat the process until complete.
6. Plug power cord into standard wall socket.
pg.3
THESE INSTRUCTIONS ARE FOR THESE ITEM NUMBERS
112861
QD ID: 91274
NOTE: This item is not a toy and should be used for decorative purposes only.
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Consult the dealer or an experienced radio/TV technician for help important announcement
Important Note:
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Visit WWW.GEMMY.COM for more information.
©2018 GEMMY INDUSTRIES CORP.
117 WRANGLER DRIVE. SUITE 100
COPPELL, TX 75019 U.S.A.
1 (877) 250-9032
MADE IN CHINA / PRINTED IN CHINA

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2014:02:28 10:17:04+08:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Modify Date                     : 2018:06:21 09:18:19+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.5-c014 79.151739, 2013/04/03-12:12:15
Instance ID                     : uuid:1114bf4c-ac2e-3d4c-8fcf-2d3b6b1fec27
Original Document ID            : adobe:docid:indd:8da6ff71-4c01-11dd-8658-cc3d831f0c83
Document ID                     : xmp.id:58AEE8FE14206811822AF1D096E5A8A7
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:9276B21B13206811822AF1D096E5A8A7
Derived From Document ID        : xmp.did:02801174072068118083F8F77815A192
Derived From Original Document ID: adobe:docid:indd:8da6ff71-4c01-11dd-8658-cc3d831f0c83
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2014:02:28 10:17:04+08:00
Metadata Date                   : 2018:06:21 09:18:19+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Thumbnail Width                 : 180
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 14719 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 21.000014
Max Page Size H                 : 29.700009
Max Page Size Unit              : Centimeters
Font Name                       : Futura-Book, Futura, Futura-Heavy, Futura-HeavyOblique
Font Family                     : Futura, Futura, Futura, Futura
Font Face                       : Book, Medium, Heavy, Heavy Oblique
Font Type                       : Type 1, Type 1, Open Type, Type 1
Font Version                    : 001.000, 001.000, 001.000, 001.000
Font Composite                  : False, False, False, False
Font File Name                  : FuturBoo; Futura, Futur; Futura, Futura Heavy.otf, FuturHeaObl; Futura
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Page Count                      : 3
For                             : baozhuang,
Title                           :   LED LIGHTSHOW STAKE ­ 3CTS_15_EN.pdf
Bounding Box                    : 34 82 571 826
Container Version               : 11
Creator Version                 : 17
Image Height                    : 744
Image Width                     : 537
Image Size                      : 537x744
Megapixels                      : 0.400

EXIF Metadata provided by EXIF.tools