GEMMY 12170 Lightshow Smart Lights Projection-Countdown User Manual

GEMMY INDUSTRIES (HK)LIMITED BVI Lightshow Smart Lights Projection-Countdown

User Manual

E-1IMPORTANT SAFETY INSTRUCTIONSWHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:READ AND FOLLOW ALL SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN THE COVER. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: This product is recommended for indoor and outdoor use. Please read this manual carefully prior to using the unit.WARNING: 1. This is an electric product – not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. 2. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. 3. This seasonal use product is not intended for permanent installation or use. 4. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. 5. Unplug the product when leaving the house, or when retiring for the night, or if left unattended. 6. Do not use this product for other than its intended use. 7. Do not hang ornaments or other objects from cord, wire, or light string 8. This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fullyinserted. Do not alter or replace the plug. It is acceptable to omit this item if the product does not employ a polarized plug. 9. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or Nails10. Do not let lamps rest on the supply cord or on any wire.11. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.12. Do not cover the product with cloth, paper or any material not part of the product when in use.13. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded.14. Read and follow all instructions that are on the product or provided with the product.15.For indoor and outdoors use .use A/C power for the unit.CAUTION: To reduce the risk of fire and electric shock:1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal. 2. Do not mount or support wires in a manner that can cut or damage wire insulation.IMPORTANT: PLEASE READ ALL THE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT.Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.WARNING: Not recommended for children under 12 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock.INSTRUCTIONS

Navigation menu