GEMMY 39109 AppLights-Lightshow Projection User Manual 10 fcc

GEMMY INDUSTRIES (HK)LIMITED BVI AppLights-Lightshow Projection 10 fcc

10 fcc user manual

INSTRUCTIONS E pg.1Congratulations! You are now the proud ownerof a LED LIGHTSHOW. Please read the directions carefully be-fore use.SAFETY WARNING: Remove all plastic fas-teners and tags. These are part of the packaging and should be discarded.SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units.WARNINGELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed during handling and use to reduce the risk of electric shock. If the supply cord is dam-aged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in order to avoid a hazard.WARNINGStrobe lights have been known to trigger seizures in people with photosensitive ep-ilepsy.WARNINGThe light is very bright. Do not shine directly into eyes.IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE US-ING(THIS FURNISHING)WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK OR INJU-
pg.2RY TO PERSONS ：READ AND FOLLOW ALL SAFETY IN-STRUCTIONS. 1. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. 2. Do not let lamps rest on the supply cord or on any wire. 3. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. 4. Do not cover the product with cloth, paper or any material not part of the product when in use. 5. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the prod-uct to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualied electrician for proper installation. 6. This seasonal use product is not intended for permanent installation or use. 7. Do not mount or place near gas or electric heaters, replace, candles or other similar sources of heat. 8. Unplug the product when leaving the house, when retiring for the night, or if left unattended. 9. This is an electric product-not a toy! To avoid risk of re, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.10. Do not use this product for other than its intended use.11. Do not hang ornaments or other objects from cord, wire, or light string.12. This product employs overload protection (fuse). A blown fuse indicates an over-load or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the prod-uct. Replace the fuse as per the user servicing instructions (follow product mark-ing for proper fuse rating) and check the product.If the replacement fuse blows, a short-circuit may be present and the product should be discarded.13. This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will t in a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace.14. Read and follow all instructions that are on the product or provided with the prod-uct.CAUTION: To reduce the risk of re and electric shock:1. Do not install on trees having needles, leaves or branch coverings of metal or ma-terials which look like metal.
pg.32. Do not mount or support wires in a manner that can cut or damage wire insulation.SAVE THESE INSTRUCTIONS.FEATURES- Plastic housing with 4 pieces high power LEDs.- UL power cord operated.- Easy installation.- High quality, long product life.TECHNICAL SPECIFICATIONSASSEMBLY INSTRUCTIONS1. Gently remove contents from packaging and lay out in a clear area.2. Assemble the light stake parts A & B as shown in illustra-tion 1 , Push the A and B parts together until tighten the screws.3. Push A through the circle, insert the grooves of projector, and tighten the circle, then adjust the angle of projector.4. Plug power cord into standard wall socket. ( illustration 2)5. Unplug when not in use.illustration 2Light sourcing:Material: PC3W LED * 32pcsFuse1W LED*1illustration 1AB
USER SERVICING INSTRUCTIONSFuse ReplacementWARNING：Risk of Fire: Replace only with same size and type of fuse.WARNING：Risk of Fire: Do not replace the attach-ment plug. Contains a safety device (fuse) that should not be removed. Discard product if attachment plug is damaged.1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug towards blades. (See illustration)3. Remove fuse carefully.4. Replace fuse only with 5 Amp Max, 125 Volt fuse (provided with product)5. Close the fuse cover. Slide closed the fuse access cover on top of the attachment plug.OPERATING DETERMINATIONSThis product was designed for indoor and outdoor use. Do not shake the device. Avoid brute force when operating the device.Keep away from direct insulation (particularly in cars) and heaters.Do not permit operation by persons not qualied to operating the device. Most dam-ages are the result ofunprofessional operation!Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.Please use the original packaging if the device is to be transported.Unauthorized modications on the device are unacceptable due to safety reasons!If this device is operated in any way different from the ways described in this manual, the product may sufferdamages and the guarantee becomes void.OPERATION- Insert the plug into socket.- Set this device as a projector.- Extract the plug if not in use. Be careful with the power cord! WARNINGpg.4
• The device is for indoor and outdoor use!• Suitable for outdoor use!• Please keep away from heaters and other heating sources!IMPORTANTDamages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Keep away from heaters and other heating sources! If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. Leave the device switched off until it has reached room temperature. Please note that damages caused by manual modications on the device or unauthorized operation by unqualied persons are not subject to warranty. Keep young children and ama-teurs away from the device!USE AND CARE INSTRUCTIONS1. Before using and reusing, inspect the product carefully. Discard any products that have cut, damaged or frayed wire insulation cords, cracks, lamp holders or enclo-sures, loose connections, or exposed copper wire.2. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections and wires. 3. When not in use, store neatly in a cool, dry location protected from sunlight.CAUTION: Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.WARNINGNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.pg.5
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-lowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment. Such modications could void the user’s authority to operate this equipment. THESE INSTRUCTIONS ARE FOR ITEM39109Visit WWW.GEMMY.COM for more information.©2016 GEMMY INDUSTRIES CORP.117 WRANGLER DRIVE. SUITE 100COPPELL, TX 75019 U.S.A.1 (877) 250-9032MADE IN CHINAPRINTED IN CHINApg.6QD ID: 71866

Navigation menu