GENERAL TOOLS and INSTRUMENTS DCS100T Wireless Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1352715
Application ID	vbPcPEDdKMfOQqeFC+0XPQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.18kB (227272 bits)
Date Submitted	2010-10-01 00:00:00
Date Available	2010-10-01 00:00:00
Creation Date	2010-09-07 15:07:10
Producing Software	PDF-XChange 3.60.0106 (Windows XP)
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual

Wireless USB Transmitter/
Wireless USB Receiver
Model: DCS100T/DCS100R
Operation Manual
Wireless USB Transmitter/
Wireless USB Receiver
Model DCS100T/DCS100R
Overview
DCS100T/DCS100R USB wireless video inspection has been designed as a user friendly and economical
way of solving hidden problems and increasing productivity. (eg. Inspect vent pipe and system of air conditioner,
machine equipment, engine and so on).
Wirelessly transmit the image signal between the unit and the receiver. Then the receiver transmit to
computer by USB, which is facilitate for watching and collecting. The camera head is connected to the probe and
with adjustable LED lights, which helps you to reach gaps and holes.The camera head has equipped with several
accessories, which makes it flexible. The magnetic tip is used to pick up small metal objects. The mirror tip is
easy to view the 90 ° angle. The hook is used to grab onto objects.
The product has built-in polymer lithium battery, also could use AC adapter for charging with LED
indication. The receiver has USB 2.0 interface, which is power supplied by USB to computer. It has the
advantages of small size clear image stable performance easy operation and portability. It is widely used in
applications such as the industry, the building, the aviation, the vehicles maintenance.
Safety Instructions
Failure to follow the instructions listed below may result in electric shock or personal injury.
Read and understand all instructions prior to any operation.
Do not remove any labels from the tool.
Keep the work area clean and well lit, cluttered and dark areas may cause accidents.
Do not operate the tool with the presence of flammable/explosive gases.
Do not use the product around corrosive chemicals, which can ruin the picture quality.
Keep bystanders
children and visitors away while operating the tool.
Stay alert, watch what you are doing and use common sense. A moment of inattention will result in serious
personal injury.
Do not overreach. Keep proper footing and balance all the time.
Always wear protective eyewear. Dust mask non-skid safety shoes hard hat or hearing protection must be used
for appropriate conditions.
Do not place this product on any unstable cart or surface. The product may fall causing serial injury to a person
or serious damage to the product.
For safety please always keep the video inspection away from any kind of liquid. Liquid increases the risk of
electrical shock and damage to the product.
Do not use this device for personal or medical use.
The unit is not shock-resistant. Do not use it as a hammer or drop it.
Battery precautions
Please use the standard factory power adapter, otherwise will destroy the inside battery.
Plese completely exhaust the power for the first time. And we recommend full charging and full discharging for
the first three times. And the charging time should not less than 12 hours. Fully activate the battery could play
maximum capacity of the built-in battery.
The charging and discharging time differs because the different power from the factory.
Please always keep the charging connector away from the metal and oily objects.
Please fully charging the battery before it is not for use, to make sure the high performance while using.
Don’t compress and puncture the inside battery.
Please stop operating if the inside battery is broken.
Don’t throw the product into fire, which will cause explosion.
Please dispose the battery properly. High temperature will cause the battery to explode. Please follow the local
regulations for disposing the old battery.
Product Configures
1
10
Camera head and Probe ×1
The inspecting grip
×1
Magnetic tip ×1
Hook tip ×1
Mirror tip ×1
Receiver
×1
DC adapter
×1
USB cable ×1
Signal cable ×1
CD ROM ×1
Tool components
Camera protection
Camera head
Probe
Probe connector
Chanel indication green ——the flash times corresponding CH1 CH4
——LED brightness decrease key
——LED brightness increase key
H Low battery indication red
/CH——Switch / exchange the wireless transmission chanel
J
Signal cable interface
Charging interface
Charging light indicator
USB interface
Working light indicator
Chanel light indicator——the flash times corresponding CH1
CH——Wireless chanel selection
Signal cable socket
CH4
Operation Instructions
Battery Charging
1 Connect the DC cable to the tail of the handle L.
2 Plug the AC plugs to household power outlet.
3 The LED L turns red ,means charging.
4 The LED L turns green, means fully charging.
5 Pull out the AC plug of adapter.
Connect the grip unit to camera head and probe
The inspecting grip must be connected to the camera head and probe. To connect the probe to the grip, make
sure the keyed ends are properly aligned. (Fig7). Once they are aligned, finger tighten the nut.
Accessories installation
If you need to use the three accessories as FIG2 (magnetic tip hook tip mirror tip), please accord the steps
followed to connect.
As showed in Fig 8, hold the camera head .Slip the semicircle end of the accessory over the flats of camera
head . Then rotate the accessory 90°to fix ,as shown in Fig9.
Program installation
Your computer should support the follows, then the recevier could connect to computer for use
• P4 1.4GHz or higher CPU
• 256 MB RAM of system memory or above (recommended)
• One available USB port (USB2.0)
• Graphics Card (Must support DirectX 9.0c)
• 1GB Free HD Space
• CD-ROM Drive (For software installation)
• Microsoft Windows XP/vista/win7
1 Place the CD, find the CD directory from "My Computer", click on "KC-Setup" file, install the drivers;
2 Directly connect the receiver to computer ( or use cable), Windows will discover the new device, just one
moment, there will be tips for normal use;
3 The CD contains share software of AMCAP, you could copy to your computer and no need installation;You
could another video software also;
Operation methods
How to operate the grip
Press
/CH key, the grip to power on, the times the green LED flashes means the corresponding chanel
( The default chanel is CH1).
b Press
c Press
Press
to increase the two LED brightness.
Fig.10
decrease the two LED brightness.
CH
to
choose
CH2——CH3——CH4——CH1 repeatly.
wireless
transmission
frequency,
every
press
to
choose
The green LED accordingly flshes twice——three times——four
times——once .
How to operate receiver:
Directly connect the USB interface of receiver to computer ( or use USB cable).
b Press CH to choose receiving frequency CH2——CH3——CH4——CH1 repeatly ( the default frequency
is CH1).
Open video software, select “KC362 USB Video”to monitor real-time image.
3 Connect the grip to receiver
The product could wirelessly transmit the image signal between the grip and the receiver; as well the unit
could transmit by connecting the grip to receiver by cable; While cable transmission, the wireless functions is
useless to ensure the image quality and not interfered from outside.
4 This product is designed for hard-to reach distance inspection. Typical applications include HVAC inspection
car inspection circuitry vessel and aircraft. While in operation, the product is easy to extend ahead. If there is
distance limitation, the accessories could be used to pick up the ring or screws on the floor.
Operation Pecautions:
a Please read the safety instructions carefully, choose desirable work area for fear causing danger.
b The probe is flexible to help you operate in hard-to–reach areas. Please don’t insert or bend by force.. Please
do not overbend any part of the probe.Normally, the bending radius should more than 5cm to prevent from
causing permanent damage to the probe.
c Don’t use the probe or camera head to modify surroundings, clear pathways or clogged areas. It couldn’t be
used as a fishing rod or tape.
d The hand-held display unit is not waterproof .The camera head and its cover are waterproof, but not acid-proof
or fireproof. Don’t touch with these materials or they will ruin the camera head’s protective plastic. Avoid
submersing the camera head into corrosive, oily places or high-temperature objects.
e Don’t place the inspection into anything or anywhere that may contain a live electrical charge. Please check
following methods to avoid injury.
For walls:For inspecting the inside walls, be sure to shut off the circuit breaker to the whole house
before using the tool.
For pipes:If you suspect a metal pipe could contain an electrical charge, have a qualified electrician
to check the pipe before using. A ground circuit, in some cases, can be returned to the cast
aluminium pipes and cause them to be charged.
For automobiles Be sure the automobile is not running during inspection. Metal and liquid under the
hood may be hot. Don’t get oil or gas on the imager head.
Operation Notes
Please don’t operate this product unless the manual has been read and proper training has been completely.
The red LED will on when low battery of the inside battery.
Please be sure to shut off the image software firstly, then turn off the product and pull out the cable before turn
off your computer, which could avoid computercrash.
Don’t use sharp objects metal or liquid to touch the signal connector in order to avoid short circuit or product
damage
Don’t let any object compress the signal cable, or placed the signal cable in a humid places.
Don’t place the signal cable on places where people often walk in order to avoid being damaged.
Don’t immerse the grip inspection into water, which will result in electric shock and damage.
Only while the product is assembled well, the camera head is water-proof, but the grip and the receiver isn’t
water-proof.
Don’t use the product if white dew forms inside the camera head.
If the tool couldn’t work well after turning it on. Please stop use and have the unit checked by a
qualified technician.
Store idle product out of reach of children and other untrained persons. The tool is dangerous in the hands of
untrained users.
Maintain the inspection tool with care. If the tool is dropped, check for the breakage ,which may affect the
tools’s operation. If it is damaged, have the tools serviced before using. Many accidents are caused by poorly
maintained products.
Use only accessories that are recommended by the manufacturer for your product. Accessories are suitable for
the tool, but may become hazardous when used on another product.
Dry your hands before turning the tool ON or OFF.
Protect against excessive heat. The product should be kept away from heat sources, such as radiators
registers
heat
stoves or other products (including amplifiers) that produce heat. Don’t use the tool near moving
machinery or areas where the temperature is exceed 45
Please cover the camera protection while not in use.
Store the product in ventilated and dry places.
Maintenance Instructions
Product service must be performed only by qualified personnel. Performed by untrained personnel could result
in injury.
When servicing the product, only use identical replacement parts. Use of authorized parts or failure to follow
maintenance instructions may create a risk of electrical shock or injury.
Don’t attempt to disassemble the product other than the needs specified on this manual.
Provide proper cleaning: don’t use acetone to clean the product. Gently clean the LCD with a soft dry cloth.
Upon completion of any service or repair, please ask the service technician to check if the tool is in proper
condition.
Stop using the unit if it starts smoking or emitting noxious fumes.
Please ask qualified person under the following conditions:
a If liquid has been spilled or objects have fallen into product.
b If product doesn’t operate normally even if you have followed the operation instructions.
c If the product has been dropped or damaged in any way.
d When the product exhibits a distinct change in performance.
Trouble Shootings
Problems
Causes
Solutions
Adapter didn’t connect well Please check and try again.
with grip power
Can’t charge the grip.
The
computer
couldn’t
find new device.
The connect or orcable is
broken.
Replace and try again.
Dead battery.
Ask a technician to replace the
battery.
Check and connect again.
Loosed cable.
The computer is not
configured
with
Use proper computer.
USB2.0
interface.
The computer is on but
without image.
The image has spots.
3 Drivers is not installed.
Check and install the drivers.
1 The chanel set is not right.
Set the same receiving and
transmiitting chanel.
2 The probe is loosed.
Check and connect again.
3 Stains on the camera head.
Check if exists stains.
Spots on the camera head.
Check and clean the camera
head.
LED lighting appears to be
dimmer at maximum
The grip couldn’t power
on.
Low battery
Use adapter for charging.
The circuit inside grip is in
protection state.
Use adapter for charging to
release.
Low energy of inside battery.
Use adapter for charging.
Dead battery
Ask a technician to replace the
battery.
C a u t i o n s
Don’t drop the product or use by force.
Don’t disassemble the product to avoid failure.
Don’t place the product with corrosive gas or objects.
Don’t expose the product in vibrated
high or low temperature.
Store the product in a safe area.
Don’t immerse the product into water, which will result in damage to
product. Please charge the inside grip battery every three month if it is not in use
for long time.
Technical Specifications
Name
USB wireless video inspection
Model
DCS100T/DCS100R
Recommended use
Indoor
Viewable angle
60°
Focal length
50mm
Diameter of camera head
12mm or other size
Connection
Standard USB connection
Valid pixels
300 thousand pixels
Image size
640×480
Wireless transmission frequency
2414MHz
2468MHz
Wireless transmission distance
Up to 10M; If no obstacles, will more
than 10M.
2432MHz
2450MHz
Probe length
Magnet tip hook tip mirror tip USB
cable Signal cable CD ROM
100cm or your requirements
Probe and camera head protection
IP67
Light source
High lighting LED
Accessories
Adapter
INPUT
OUTPUT
AC 100 240V 50 60Hz
DC 5.5V 1.5A
Inside battery
Polymer Lithium battery
Battery capacity
1200mAh
Charging time of inside battery
About 3hours
Battery life
About 2hous
Operating temperature
Operating humidity
45
RH 5% 95% non-condensing
Storage temperature
-20
Dimension
Weight
+60
85%
Grip
Receiver
266mm×73mm×80mm
Grip
About 159 g w/o probe
Receiver
w/o battery
83mm×42mm×19mm
35g
Warranty
The product is warranted to be free from defects in materials and workmanship for a period of one year
from the date of purchase.
Notice: The warranty does not apply to the following conditions:
Disassembling the laser tool will void the warranty.
We are not responsible for any damage resulting from abrasion, water, dropping or disassembling.
Tips
Most parts of the product could be recycled, please refer to your local regulations for disposing of them
instead of throwing into the dustbin.
10
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation
Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the
user’s authority to operate the equipment.
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Producer                        : PDF-XChange 3.60.0106 (Windows XP)
Create Date                     : 2010:09:07 15:07:10+08:00
Page Count                      : 12

EXIF Metadata provided by EXIF.tools