GEP TECHNOLOGY C3 IP Camera User Manual

GEP TECHNOLOGY CO.,LIMITED IP Camera

User Manual

GEP C3 User Manual
Important notes: Use only the power adaptor attached with the product. Use unauthorized power adapter may cause damage to your IP Camera. IP Camera terminal shall be installed in an indoor environment where the rain or snow could not pour it. Do not touch the lens of the IP Camera at will. The optimum focus range has been set before it is delivered out of the factory. If you turn the lens, it may cause incorrect focus and vague images. Do not turn the Pan/Tilt by force as it may cause damage to internal components of the Pan/Tilt. Do connect your mobile device to local Wi-Fi network firstly before initially installation of a new camera. RESET BUTTON functions when it was pressed and hold for at least 8 seconds. Blue LED status: Flash fast: Device automatic configuration. At this time, you can’t operate the device. Flash slowly: Waiting for a Wi-Fi connection. At this time, you can find the camera SSID in the Wi-Fi list and start to connect the camera. Light on and no flash: Working condition. At this time, the camera has been connected to a local Wi-Fi network. You can view and control the camera.
1 WELCOME GEP C3 is a high-resolution (720P), feature-rich digital wireless IP Camera, designed for superior performance in home/office environments. It combines a high quality digital Video Camera with network connectivity and powerful android/IOS Apps to bring clear live video to you wherever you are over the Internet. You can use this IP Camera to monitor some special places such as your home and your office. Also controlling and managing images are simple by clicking the app through the network. 2 Features ☆ 720P HD Streaming video ☆ 4-split screen display ☆ Free on line Dropbox recording ☆ Pure wireless Wi-Fi settings. ☆ Support wireless network (WI-FI/802.11/b/g/n) ☆ Real time streaming ☆ Two way audio, talk back and forth ☆ Support PT control, Pan 270°, Tilt 90° ☆ Snapshot and synchronize with Album in your smart devices ☆ Event triggered notifications, Intelligent alerts give alarm in cause of motion detection ☆ Video recording and playback ☆ Night vision ☆ Enterprise-level security for data transference support WEP/WPA/WPA2 encryption ☆ Optimized H264 video compression for transmission 3 Packing List Untie the pack and check the items contained against the following list: ☆ IP Camera X1 ☆ User Manual X1 ☆ DC Power Supply X1 ☆ Mounting bracket X1 NOTE: Please contact us immediately in case of any damaged or short of contents. Night vision sensor Speaker Antenna Mic Indicator LED Micro USB POWER Micro SD Card slot Reset Button Lens adjustment knob
4. Camera installation 4.1 Scan below QR Code to install app “MyCam Pro” into mobile device. IOS Android 4.2. Plug the power adaptor into camera. 4.3. It takes approx 60 seconds to boot up the camera, and the indicator blue led will keep flash. 4.4 For Android user: (Please make sure your mobile device has been connected to a local Wi-Fi) 1. Sign up to use “cloud” Functions or “skip” to process 2. Press “+” at the center of each view window to add camera 3. Select “add manually” for the first time installation. Press “Cloud import” for users who already added camera at personal cloud.
4. Press “Wireless” for Model C1 and C3 5. Input your local Wi-Fi password 6. Connect to the camera by selecting Camera Wi-Fi SSID “IPCAM-AP-XXXXXXXXXXX” Note: a. Camera Wi-Fi SSID can be found in the list when Blue LED flashes slowly. b. Camera is connected to local Wi-Fi when Blue LED stops flashing. At this time, Camera Wi-Fi SSID can’t be found. 7. Press “+” to proceed 8. Input device password, the default is “admin”. This password needs to be changed later for safety reason. 9. Done and ready for Real time streaming
4.5 “Android” Advanced setting 4.6 For Apple IOS user: (Please make sure your mobile device has been connected to a local Wi-Fi) Device Security Code (Device Password) must be reset after initial installation to enhance safety. Users can alter Wi-Fi connections remotely by selecting the detachable wifi signal around the camera and input wifi password. Users can active /close motion detection function. And can also select type of notifications such as by ringtone and/or vibration. This function works only when using micro SD card. By selecting “ALARM” mode, less storage will be occupied. Please be noted that this “Alarm” mode only valid when “motion detection” is NOT “off”. 2. Press “+” at the center of each view window to add camera 1. Sign up to use “cloud” Functions or “skip” to proceed 3. Select “Manually Add” for the first time installation. Press “Cloud import” for users who already added camera in personal cloud.
4. Press “Wireless” for Model C1 and C3 5. Input your local Wi-Fi password 6. Follow below instruction to connect to the camera at “setting” page of mobile devices. Note: a. Camera Wi-Fi SSID is “IPCAM -AP-XXXXXXXXXXX”. b. Camera Wi-Fi SSID can be found when Blue LED flash slowly. c. Camera is connected to local Wi-Fi when Blue LED stops flashing. At this time, Camera Wi-Fi SSID can’t be found. 7. Input device password, the default is “admin”. This password needs to be changed later for safety reason. 8. Done and ready for Real time streaming
4.7 “IOS” Advanced setting 5 “View window” settings 6 “Device” settings “Mic”; default is close “Flip” the view “Mirror” the view view “Environment” settings Record video at mobile phone Snap shoot at mobile phone Adjust video quality manually Press the circle at up-right corner of each living view window to active the device setting panel. “Device list” which shows all cameras connected to this app. Users can remove cameras. This support up to 16 devices. “Event list” which shows all motion detection notifications by this camera. This function works only with micro SD card “Record list” which shows recorded videos and snapshots by this camera “Advanced setting” by which users can modify device password, set motion detection, change wifi connection, set SD Card recording etc. “Delete” which removes this view only. will not remove the camera from APP Device Security Code (Device Password) must be reset after initial installation to enhance safety. Users can alter Wi-Fi connections remotely by selecting the detachable wifi signal around the camera and input wifi password. With Micro SD card, users can record the video stream locally. By selecting “ALARM” recording mode, less storage will be occupied. And this “Alarm” mode only valid when “motion detection” is NOT “off”.
7 Trouble shooting 7.1 Have forgotten the device password. --To reset the password, press and hold down the RESET BUTTON for at least 8 seconds. (Please keep the power on when do RESET). Default device password: admin 7.2 Can’t find the camera Wi-Fi name “IPCAM-AP-XXXX” in mobile Wi-Fi list during initial installation process. -- Wait about 2 to3 minutes after power on the camera until the indicator LED flash slowly. 7.3 Can’t install the camera -- Be sure your mobile device has been connected to a local Wi-Fi and you know the password; Be noticed that the mobile device can’t connect to a 4G, 3G network but only Wi-Fi. 7.4 The video stream getting delay -- The image frame rate is subjected to network bandwidth. You can adjust the video quality to resolution of 640*360. 7.5 The video image getting vague -- The most possible reason is the focal length of the camera lens changes. You can adjust lens by rotate the Lens adjustment knob slightly until the image clear. 7.6 Can’t hear when press the “Mic” button . -- You need to increase the sound volume of your mobile device. 7.7 How to synchronous the saved video/snap shoot between the app and Album --Only snap shoot for IOS system need manually operation to synchronous to Album. You need to find the snap shoot at “Record list”. There is a save function which can save the snap shoot to Album. --Others are all automatically. That is, for Android system, both snap shoot and video will be automatically synchronous to Album. And videos for IOS will also be automatically synchronous to Album. 7.7 How to add camera to another mobile device after that camera already added to one mobile device. -- If the mobile device is connected to the same LAN network as that camera, Please select “WIRED” at step 3. And click “Search” function to find that camera to add; -- If not within the same LAN network, please select “WIRED” at step 3 and input the UID/device password to add. Device UID can be found at “Device List” from the app where camera already added. Device UID is a 20 character. 7.8 The camera didn’t connect to local Wi-Fi after the installation process. -- You need to delete the device from you app from the “device list”, Press “Reset” key and install the camera following the instruction from the 1st step. Until the blue LED stops flashing, that indicates that the camera is connected to local Wi-Fi.
7.9 I am an expert and want to configure the camera further. -- You can visit 192.168.234.1 after connecting to the camera through Wi-Fi using IE. The camera will be at AP mode if not connected to an existing Wi-Fi router. 8. Specifications CertificationWarrantyITEMSGEP C3Image SensorSensorHigh Definition Color CMOS SensorDisplay Resolution1280 x 720 (1 Mega pixels)Min. Illumination0 Lux (With IR Illuminator)Image Frame RatePan/Tilt AngleDual streamHorizontal:330° & Vertical: 90°LensLens Type4.0mm Glass LensAngle of View65°Image adjustmentbrightness/contrast adjustable by device automaticlly30fps maxmium, downward adjustableResolution720P(1280 x 720), VGA(640 x 480)StreamNight visibility11pcs IR-LEDs, night vision range up to 10 metresP2PAudioInput/OutputSupports two-way audioBuilt-in Mic & SpeakerAudio CompressionG.726VideoImage CompressionH.264Flip imageflip and mirror adjustable by userInfrared modeAutomaticWi-FiWireless StandardIEEE802.11b/g/nData RateIEEE802.11b: 11Mbps(Max.);IEEE802.11g: 54Mbps(Max.);IEEE802.11n: 150Mbps(Max.).Wireless SecurityWEP, WPA, WPA2Remote AccessSet privacy zone manually (using PC)Storagelocal storage, support up to 32GB Micro SD cardNetwork ProtocolIP, TCP, UDP, HTTP, HTTPS, SMTP, FTP,, DDNS, UPnPFirewallSupports IP FilteringResetReset button is availablePowerPower SupplyDC 5V/2.0APower Consumption9 Watts (Max.)Operating SystemMicrosoft Windows 2000/XP, Vista, 7, 8;Mac OSiOS, AndroidOther FeaturesMotion DetectionIntelligent notificationPrivacy ZonePhysicalDimension(LxWxH)102*95.5*115 mmNet Weight285gLimited 2-year warranty(Not including US and China mainland)EnvironmentOperating Temperature -10°C ~ 50°C (14°F ~ 122°F)Operating Humidity20% ~ 85% non-condensingStorage Temperature -20°C ~ 60°C (-4°F ~ 140°F)Storage Humidity0% ~ 90% non-condensingCE, FCC, RoHS
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu