GGMM M3 Wireless Digital Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3553612
Application ID	Du6n3HFWxrnpa1qeGHv0Vw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	75.57kB (944652 bits)
Date Submitted	2017-09-10 00:00:00
Date Available	2017-09-14 00:00:00
Creation Date	2017-09-06 19:46:10
Producing Software	Mac OS X 10.10.4 Quartz PDFContext
Document Lastmod	2017-09-11 00:11:18
Document Title	User Manual
Document Creator	Adobe Illustrator CS6 (Windows)

Wireless Digital Speaker
www.ggmm.com
Speakers
English ...................................................... 01-05
LED Mode Indicator
Volume Knob
Power/Mode Button
RESET
18V 3A
AUX IN
01 English
English 02
M3 Wireless Digital Speaker Box Content
Setup Guide
Step 1: Take out M3 and accessories, please connect the power adaptor, press and hold down the Power/Mode button for 3 seconds to turn on
the speaker.
Step 2: Press the Power/Mode button to choose the music source ( Wi-Fi→Bluetooth→AUX ).
M3 + AC power adaptor + AUX audio cable + Setup Guide + Warranty card
Wi-Fi Mode
Press Power/Mode button - the MODE LED will flash purple for 3-5 seconds, then change to BLUE; it is now in Wi-Fi Mode.
WIRELESS DIGITAL SPEAKER
Please Note: Avoid using the speaker in a complicated public Wi-Fi network environment (e.g., office, airport and hotel), as this may lead to
an unstable connection (play buffer, connection failure, etc.)
Back Button Control
Top Button Function
Two modes are available to play music wirelessly with M3: Router Mode (Standard Mode) and Direct
Mode (Optional Mode).
Router Mode (Standard Mode): Router Mode is recommended in a Wi-Fi environment, in which both local and online music can be played.
Once Router Mode is successfully set, all devices (e.g., your smart phone, tablet PC, PC, MAC, etc.) within the same Wi-Fi network can
directly play music without having to repeatedly log in and out.
LED Mode Indicator
Volume knob
Power/Mode button
Power/Mode Button:
- Press and Hold the Power/Mode button for 3 seconds to power
your speaker on and off.
- Press the Power/Mode button to switch the audio input modes:
WI-FI/Bluetooth/AUX.
Volume knob:
Turn the knob clockwise to increase volume; turn the
knob counter clockwise to decrease volume.
M3
Reset button
Reset:
Hold and press the Reset button for 3 seconds or until the mode
light turns off. This will reset your product to Wi-Fi factory default
settings.
Direct Mode (Optional Mode): Use Direct Mode in a non-Wi-Fi environment. Wireless local music play can be realized after successful
point-to-point connection, but streaming from online sources will generate cellular mobile network data flow.
M3 LED Mode Indicators
Indicator Color
Status
Description
Purple
Solid
Processing to Wi-Fi Mode
Blue
Solid
Wi-Fi Connection Ready
Red
Flashing
Wi-Fi Mode failed to connect
Flashing
Processing Bluetooth Setup, waiting for the
connection of external device
Solid
Bluetooth Connection Mode
Solid
AUX Connection mode
White
Green
M3
Router Mode (Standard Mode)
For iOS users: Download the GGMM Music app from Apple App Store onto your compatible iOS device; or scan the QR code to download and
install the GGMM Music app.
For Android users: Download the GGMM Music app from Google play onto your compatible Android device; or scan the QRcode to download
and install GGMM Music app.
Open the app by tapping on the
icon. Follow the prompts in the app to continue pairing your smart device to M3.
03 English
English 04
Scan the QR code to download and install GGMM Music App
For Android users: No need to download any app. Please use the ‘Cast’ button in the built-in music jukebox of your smart phone or tablet to
wirelessly play your music.
SONY
iOS client
Android client
For Mac OS users: Please visit www.ggmm.com to download setup instructions, after setup is complete, you can play music through iTunes.
When streaming from other music source, you can use AirPlay to wirelesly play your music.
GGMM_M3_XXX
Android users: May also use the third party DLNA music player. The following recommended
players can be downloaded in the Google Play store or other Android application markets.
For Windows PC users: Please visit www.ggmm.com to download setup instructions.
Please note: If the built-in media player doesn't work due to the difference in phones
or application versions, please use the third party DLNA music player.
Direct Mode (Optional Mode):
For Mac OS users: Use iTunes to push music, When using other music players, you may use AirPlay to wireleslly play your music.
Boot your device (smart phone, tablet PC, PC, MAC, etc.) and then enter Wi-Fi settings. Enable
Wi-Fi and connect to the network marked as "GGMM_M3_XXX". After connection, users with
different operating systems may operate according to the steps below:
Please Note: After the successful connection of iOS device, a symbol “√” will appear in
front of Wi-Fi signal icon and Wi-Fi icon will no longer appear on the status bar.
XXX
For iOS users: No need to download any app.You can operate directly with AirPlay
For users with system version above iOS 7.0: To play music wirelessly, slide the screen from
bottom to top with your finger to enable
AirPlay and then select GGMM_M3_XXX.
Please Note: Turn up the mobile phone or tablet PC in priority when wirelessly playing music.
GGMM_M3_XXX
For Windows PC users：Please go to GGMM’s official website www.ggmm.com to download a dedicated music player.
05 English
Bluetooth Mode:
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Press Power/Mode button - the MODE LED will flash white and Bluetooth Mode is now on.
In your device settings, turn Bluetooth ON. Connect to ‘GGMM_M3’ open your music player
and press play. (iPhone as example)
AUX Mode:
Press Power/Mode button - the MODE LED will turn solid green, and it is now in AUX Mode.
Connect your device to the speaker with the AUX cable, open your player and play your music.
o Consult the dealer or an experienced radio/TV technician for help.
Multi-room Play in Wi-Fi mode
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
Please Note: “GGMM MUSIC” app is required to set up.
Multiple M3 units can be connected in Wi-Fi mode; you can also set up
multiple M3 in different rooms to play the same music.
Setting up M3 L/R channels in Wi-Fi mode
Please Note: “GGMM MUSIC” app is required for set up.
When you use two M3 units in Wi-Fi mode, you can set up the M3 as
individual‘L’ (left) channel and ‘R’ (right) channel to get wider range of
the stereo effect.
Please Note: For more information about the M3, please visit our website at www.ggmm.com
AirPlay：Please go to Apple’s official website http://www.apple.com/airplay for more information.
DLNA： Please go to http://en.wikipedia.org/wiki/DLNA for more information.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Bluetooth is a registered trademark of the Bluetooth SIG, Inc.
Airplay is a registered trademark of Apple Inc.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Left
Right
0°
-30°
+30°
Listening
Position
To comply with FCC RF exposure compliance requirements,this grant isapplicable to only mobile
configurations. The antennas used for this transmittermust be installed to provide a separation
distance of at least 20 cm from allpersons and must not be co-located or operating in conjunction with any
otherantenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Create Date                     : 2017:09:06 19:46:10+08:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2017:09:11 00:11:18+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2017:09:11 00:11:18+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Format                          : application/pdf
Document ID                     : uuid:e12bec82-7c65-4050-bf08-0c8189a1bb76
Instance ID                     : uuid:6aafda10-0ef5-4aa8-9d82-28d7e732f6f6
Producer                        : Mac OS X 10.10.4 Quartz PDFContext
Page Count                      : 5

EXIF Metadata provided by EXIF.tools