GIGA BYTE TECHNOLOGY 28713C55RX GIGABYTE Nano receiver User Manual L216 manual cover
GIGA-BYTE TECHNOLOGY CO., LTD. GIGABYTE Nano receiver L216 manual cover
manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1470706 |
| Application ID | hrG1vFV+tbxv/S3oL7NP2g== |
| Document Description | manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 351.95kB (4399416 bits) |
| Date Submitted | 2011-05-24 00:00:00 |
| Date Available | 2011-05-24 00:00:00 |
| Creation Date | 2009-08-18 14:22:32 |
| Producing Software | Adobe PDF library 8.00 |
| Document Lastmod | 2011-05-12 17:46:23 |
| Document Title | L216-manual-cover |
| Document Creator | Adobe Illustrator CS3 |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end its life separately from your household waste. There are sparate collection system for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. Wireless LASER MOUSE ECO600 Long-lasting Wireless Laser Mouse Model nr: 28713ECO600 FCC ID: JCK28713ECO600 GIGABYTE Nano recevier Model nr: 28713C55RX FCC ID: JCK28713C55RX User's Guide Introduction Dpi light indicator Congratulations on your purchase of the most innovative mini wireless mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse can track reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will make you more productive and more comfortable. Safety Notice This product complies with IEC 60825-1, Class I laser product. The product complies with FCC and CE rules. 800 dpi 1200 dpi 1600 dpi A. Hardware Installation 1. Insert the batteries a. Remove the battery compartment cover on the top case of the mouse. b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet. c. Close the battery compartment cover properly. d. Make sure the Power on-off switch on the bottom of the mouse is ON. e. The Low Power LED on the wheel bar will be on for 6 seconds if the mouse power is on. Please DO NOT direct the laser beam at anyone's eyes. Features 2.4GHz (distance 6~8m), 16 Channels/216 ID Using state-of-art technology. High tracking speed and sensitivity. Nano receiver. Longer battery life. Auto-Link, Plug and Play! No need to set the channel ID. Power on/off switch. Ergonomic design. 800/1200/1600 dpi switchable. Internet Forward & Backward button Rubber side grips. 2*AA Alkaline batteries included. 2 * AA batteries Battery compartment cover A wrong battery placement may cause batteries overheat. Mouse Wheel button Receiver Dpi (+)button Dpi (-)button Battery cover ID reset button Power on/off switch Receiver The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any button of the mouse" is compulsory to wake it up. Power on/off: There is a Power on/off switch designed to save the batteries power while non-usage of a longer period. User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been successfully switched. Pull out the receiver 2. Connect the receiver 4. Replace the new batteries Please replace a pair of new batteries and follow the previous instructions. (2, 3) a. Turn on your PC. b. Connect the receivere to USB port on PC. Note The red LED on the scroll wheel is the low batteries power indicator. It indicates that batteries inside the mouse are needed to be replaced. ◎ PC USB port 3. Communication : The mouse & the receiver The 2.4Ghz RF mouse features a dual-way transmission technology which enables the mouse and the receiver auto-communication. A. Auto-link mode 1. Make sure the Power On-Off Switch on the bottom of the mouse is ON. 2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the mouse and the receiver is auto-linked successfully. B. Manual mode If you find the communication channel does not connect well, you can use the software connection tool to re-connect the mouse & receiver to reset a new channel ID. You are able to get the software from the included diskette of the package or download from your local brand vendor's website. ID links OK! Execute ID connection software Press ID reset button Note While the mouse is working, if encountering any interference, the mouse and the receiver will automatically source out and transfer to another free channel. During the transferring, the cursor movement may have a second delay. Trouble Shooting a. Make sure you have connected the receiver correctly to the computer's USB port. b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the computer, the computer monitor or external storage drives. c. Make sure you have set the communication between the receiver and the mouse. Refer to the Communication :The mouse and the receiver d. If you find the communication channel does not connect well. You can use the software connection tool to re-connect the mouse & receiver to reset a new channel ID. You are able to get the software from the included diskette of the package or download from your local brand vendor's website. e. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these devices for conflicts, and change the settings as required. f. Make sure that you are not working the mouse on glossy or reflective surfaces. ◎ Battery use reminders 1. Remove worn-out batteries from equipment immediately and dispose of promptly. 2. Keep all batteries (used or new) out of the reach of children. 3. To have the batteries with a regular check and replace new batteries if not used for a long time. 4. Never dispose of batteries in fire, as they could explode. 5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture. 6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse. 7. Remove batteries from the electrical device if the device is not going to be used for a long time. 8. If the performance of the batteries decreases substantially, it is time to replace the batteries. FCC statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● ● To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example-use only shielded interface cables when connecting to computer or peripheral devices).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2009:08:18 14:22:32+08:00 Creator : Adobe Illustrator CS3 Modify Date : 2011:05:12 17:46:23+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2011:05:12 17:46:23+08:00 Creator Tool : Adobe Illustrator CS3 Thumbnail Width : 256 Thumbnail Height : 176 Thumbnail Format : JPEG Thumbnail Image : (Binary data 7638 bytes, use -b option to extract) Format : application/pdf Title : L216-manual-cover Document ID : uuid:ca441716-ad98-44b1-ae6b-a1792f5bc540 Instance ID : uuid:d947bcf4-5e4c-43b1-83d8-da4244774ade Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : F:\Amy\說明書\ECO600網頁第一張圖.jpg, E:\my skype receive\20110503\292.jpg Manifest Reference Instance ID : xmp.iid:C75AAB668956E011966FBC7916537175, uuid:17EA69E3DE7AE0118848B95E38E4061B Manifest Reference Document ID : uuid:77A54E695C0ADF1192C1A419517C2AB3, uuid:16EA69E3DE7AE0118848B95E38E4061B Producer : Adobe PDF library 8.00 N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 296.333333 Max Page Size H : 209.550000 Max Page Size Unit : Millimeters Font Name : Arial-BlackItalic, Arial-BoldItalicMT, Arial-ItalicMT, ArialMT Font Family : Arial Black, Arial, Arial, Arial Font Face : Italic, Bold Italic, Italic, Regular Font Type : TrueType, Open Type, Open Type, Open Type Font Version : Version 1.00, Version 2.90, Version 2.90, Version 3.00 Font Composite : False, False, False, False Font File Name : ARBLI___.TTF, ARIALBI.TTF, ARIALI.TTF, ARIAL.TTF Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : 預設色票群組 Swatch Group Type : 0 Swatch Colorant Swatch Name : 白色, 黑色, 80% 黑色, 60% 黑色, 40% 黑色, 20% 黑色, 紅色 M=100 Y=100, 75% 紅色 M=75 Y=75, 50% 紅色 M=50 Y=50, 25% 紅色 M=25 Y=25, 綠色 C=80 Y=100, 75% 綠色 C=60 Y=75, 50% 綠色 C=40 Y=50, 25% 綠色 C=20 Y=25, 藍色 C=100 M=50, 75% 藍色 C=75 M=37.5, 50% 藍色 C=50 M=25, 25% 藍色 C=25 M=12.5, 橘色 M=50 Y=100, 75% 橘色 M=37.5 Y=75, 50% 橘色 M=25 Y=50, 25% 橘色 M=12.5 Y=25, 紫色 C=50 M=90, 75% 紫色 C=37.5 M=67.5, 50% 紫色 C=25 M=45 , 25% 紫色 C=12.5 M=22.5, 天藍色 C=80, 75% 天藍色 C=60, 50% 天藍色 C=40, 25% 天藍色 C=20, 黃色, 75% 黃色, 50% 黃色, 25% 黃色 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000001, 60.000002, 39.999998, 19.999999, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 50.000000, 37.500000, 25.000000, 12.500000, 90.000004, 67.500001, 44.999999, 22.500002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000 Swatch Colorant Black : 0.000000, 100.000000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000 Page Count : 3 For : amy.cun (�o�ñ�), Bounding Box : -36 -632 878 36 Container Version : 9 Creator Version : 13EXIF Metadata provided by EXIF.tools