GIGA BYTE TECHNOLOGY 28713C66RX GIGABYTE Nano Receiver User Manual Interface

GIGA-BYTE TECHNOLOGY CO., LTD. GIGABYTE Nano Receiver Interface

User manual

     Aivia Xenon Dual Mode Touchpad Mouse  User’s Manual                All other brands and trademarks are the properties of their respective owners. The product specifications are subject to change without notice. GIGABYTE / GM-Xenon/ 28713C66RX
Introduction  Congratulations on your purchase of the most innovative touchpad mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the touchpad mouse can track reliably on tricky polished or wood-grain surfaces, and be used as a touchpad as well. It is much more advanced than you imagine and will make you more productive and comfortable.  Features   Auto link, plug-and-play! No need to set the channel ID  2.4GHz, 1000 DPI  Nano receiver  Laser tracking engine with high tracking speed and sensitivity  Power on/off and mode switch  2*AAA batteries included  Hardware Installation  1. Insert batteries a. Remove the battery compartment cover in the case b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet c. Close the battery compartment cover properly d. Make sure the Power on-off switch on the mouse in ON e. The LED on the bar will blink 3 seconds if the mouse power is on Warning: A wrong battery placement may cause batteries overheat  △  Note The unit offers a strong power saving management. Once the mouse accesses sleeping mode, to clip any key on the mouse is compulsory to wake it up. Power on/off: There is a power on/off switch designed to save the batteries power while non-usage of a longer period.  Connect the Receiver  1. Turn on your PC 2. Connect the receiver to USB on PC
Communication: The mouse & the Receiver  The 2.4GHz RF mouse features a dual-way transmission  technology which enables the mouse and the  receiver auto-communication.  Auto-link mode 1. Make sure the Power On/Off switch on the mouse is ON 2. Operate the mouse, and cursor’s movement is mapping mouse movement. Now the mouse and the receiver is auto-linked successfully.  Manual-link mode If you find the communication channel does not connect well, you can use the software  communication tool to re-connect the mouse & the receiver to reset a new channel ID. You are able to get to software on the website.  △Note While  the  mouse  is  working,  if  encountering  any  interference,  the  mouse  and  the  receiver  will  automatically source out and transfer to another channel. During transferring, the cursor movement may have a second delay.  Replace the new batteries  Please replace a pair of new batteries and follow the previous instructions.  △Note The red LED on the scroll wheel is the low batteries power indicator. It indicates that batteries inside the mouse are needed to be replaced.  Trouble Shooting  1. Make sure you have connected the receiver correctly on the PC’s USB port 2. For the best performance, we suggest you to locate the receiver with a distance from other electric devices, such as the computer monitor or external storage devices 3. Make  sure  you  have  set  the  communications  between  the  receiver  and  the  mouse.  Refer  to  the communication section. 4. If  you find  the communication channel  does not  work  well, you  may  use  the  software  connection  tool  to re-connect the mouse & receiver and reset a new channel ID. You are able to get to software on the website. 5. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these devices for conflicts, and change the settings as required. 6. Make sure that you are not working the mouse on glossy or reflective surfaces.
Battery use reminders  1. Remove worn-out batteries from equipment immediately and dispose of promptly 2. Keep all batteries (used or new) out of the reach of children 3. To have the batteries with a regular check and replace new batteries if not used for a long time 4. Never dispose of batteries in fire, as they could explode 5. Always  replace all  the  batteries  at  the  same time.  Mixing  old  and  new  batteries or  mining  types  (such  as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture 6. Do not mix different types of batteries (e.g. ni MH, NiCd, alkaline, and etc) in the mouse 7. Remove batteries from the electrical device if the device is not going to be used for a long time 8. If the performance of the batteries decreases substantially, it is time to replace the batteries  FCC Statement  This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  equipment  generates  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  that  interference  will  not  occur  in  a  particular  installation  if  this  equipment  does  cause  harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example-use only shielded interface cables when connecting to computer or peripheral devices).   FCC ID: JCK28713C66RX (RECEIVER)     This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation.
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end its life separately from your household waste. There are separate collection system for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.

Navigation menu