GIGA BYTE TECHNOLOGY 28713ECO500 ECO500 Long-life Wireless Laser Mouse User Manual L216 manual cover

Download:
Mirror Download [FCC.gov]
Document ID	1484957
Application ID	Bc1zyiLmMOXI9C+C0+IeLw==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	349.1kB (4363772 bits)
Date Submitted	2011-06-17 00:00:00
Date Available	2011-06-20 00:00:00
Creation Date	2009-08-18 14:22:32
Producing Software	Adobe PDF library 8.00
Document Lastmod	2011-06-01 18:17:11
Document Title	L216-manual-cover
Document Creator	Adobe Illustrator CS3

Wireless
LASER MOUSE
User's Guide
Introduction
A. Hardware Installation
Congratulations on your purchase of the most innovative mini wireless mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
1. Insert the batteries
Safety Notice
This product complies with IEC 60825-1, Class I laser product.
The product complies with FCC and CE rules.
a. Remove the battery compartment cover on the top case of the mouse.
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartment cover properly.
d. Make sure the Power on-off switch on the bottom of the mouse is ON.
e. The Low Power LED on the wheel bar will be on for 6 seconds if the mouse power is on.
2 * AA batteries
Please DO NOT direct the
laser beam at anyone's eyes.
Battery compartment cover
A wrong battery placement
may cause batteries overheat.
Features
2.4GHz (distance 6~8m), 16 Channels/224 ID
Using state-of-art technology. High tracking speed and sensitivity.
Nano receiver.
Longer battery life.
Auto-Link, Plug and Play! No need to set the channel ID.
Power on/off switch.
Ergonomic design.
800/1600 dpi switchable button.
Internet Forward & Backward button
Rubber side grips.
2*AA Alkaline batteries included.
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.
User can push DPI button to change the resolution. The LED on wheel bar will be flashed when dpi has been
successfully switched.
2. Connect the receiver
a. Turn on your PC.
b. Connect the receivere to USB port on PC.
Mouse
Wheel button
Receiver
Dpi button
Low power indicator
Power on/off switch
Battery cover
ID reset button
Receiver
PC
USB port
Pull out
the receiver
3. Communication : The mouse & the receiver
The 2.4Ghz RF mouse features a dual-way transmission technology which enables the
mouse and the receiver auto-communication.
A. Auto-link mode
1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.
2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the
mouse and the receiver is auto-linked successfully.
B. Manual mode
If you find the communication channel does not connect well, you can use the software
connection tool to re-connect the mouse & receiver to reset a new channel ID. You are
able to get the software from the included diskette of the package or download from your
local brand vendor's website.
ID links OK!
Execute ID connection software
Press ID reset button
Note
While the mouse is working, if encountering any interference, the mouse and the receiver will
automatically source out and transfer to another free channel. During the transferring, the
cursor movement may have a second delay.
4. Replace the new batteries
Please replace a pair of new batteries and follow the previous instructions. (2, 3)
Note
The red LED on the scroll wheel is the low batteries power indicator. It indicates that
batteries inside the mouse are needed to be replaced.
◎
Trouble Shooting
a. Make sure you have connected the receiver correctly to the computer's USB port.
b. For the best performance, we suggest you to locate the receiver with a distance from other electrical
devices, such as the computer, the computer monitor or external storage drives.
c. Make sure you have set the communication between the receiver and the mouse. Refer to the
Communication :The mouse and the receiver
d. If you find the communication channel does not connect well. You can use the software connection
tool to re-connect the mouse & receiver to reset a new channel ID. You are able to get the software
from the included diskette of the package or download from your local brand vendor's website.
e. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these
devices for conflicts, and change the settings as required.
f. Make sure that you are not working the mouse on glossy or reflective surfaces.
◎
Battery use reminders
1. Remove worn-out batteries from equipment immediately and dispose of promptly.
2. Keep all batteries (used or new) out of the reach of children.
3. To have the batteries with a regular check and replace new batteries if not used for a long time.
4. Never dispose of batteries in fire, as they could explode.
5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such
as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture.
6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse.
7. Remove batteries from the electrical device if the device is not going to be used for a long time.
8. If the performance of the batteries decreases substantially, it is time to replace the batteries.
FCC statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation if this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
●
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment. (Example-use only
shielded interface cables when connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This symbol on the product or in the instructions means that your electrical and electronic equipment should
be disposed at the end its life separately from your household waste. There are sparate collection system for
recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.
ECO500 Long-life Wireless Laser Mouse
Model nr: 28713ECO500
FCC ID: JCK28713ECO500
GIGABYTE Nano Receiver
Model nr: 28713C55RX
FCC ID: JCK28713C55RX

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:17:08
Modify Date                     : 2011:06:01 18:17:11+08:00
Create Date                     : 2009:08:18 14:22:32+08:00
Metadata Date                   : 2011:06:01 18:17:11+08:00
Creator Tool                    : Adobe Illustrator CS3
Thumbnail Width                 : 256
Thumbnail Height                : 164
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18501 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : L216-manual-cover
Document ID                     : uuid:ca441716-ad98-44b1-ae6b-a1792f5bc540
Instance ID                     : uuid:eb3db25e-006d-4649-9a09-bbfc898dfb8b
Manifest Link Form              : EmbedByReference, EmbedByReference
Manifest Reference File Path    : F:\說明書\L219\AI\utility02.gif, F:\說明書\L219\AI\utility01.gif
Producer                        : Adobe PDF library 8.00
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 296.333333
Max Page Size H                 : 209.550000
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, Arial-BoldItalicMT, ArialNarrow, ArialMT, DFHei-Md, MingLiU, AdobeMingStd-Light
Font Family                     : Arial, Arial, Arial, Arial, 華康中黑體, 細明體, Adobe 明體 Std
Font Face                       : Bold, Bold Italic, Narrow, Regular, Regular, Regular, L
Font Type                       : Open Type, Open Type, Open Type, Open Type, TrueType, TrueType, Open Type
Font Version                    : Version 3.00, Version 2.90, Version 2.37, Version 3.00, 1 Aug., 1999: Unicode Version 1.00, Version 3.21, Version 6.002;PS 6.001;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : ARIALBD.TTF, ARIALBI.TTF, ARIALN.TTF, ARIAL.TTF, dffn_b5.ttc, mingliu.ttc, AdobeMingStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : 白色, 黑色, 80% 黑色, 60% 黑色, 40% 黑色, 20% 黑色, 紅色 M=100 Y=100, 75% 紅色 M=75 Y=75, 50% 紅色 M=50 Y=50, 25% 紅色 M=25 Y=25, 綠色 C=80 Y=100, 75% 綠色 C=60 Y=75, 50% 綠色 C=40 Y=50, 25% 綠色 C=20 Y=25, 藍色 C=100 M=50, 75% 藍色 C=75 M=37.5, 50% 藍色 C=50 M=25, 25% 藍色 C=25 M=12.5, 橘色 M=50 Y=100, 75% 橘色 M=37.5 Y=75, 50% 橘色 M=25 Y=50, 25% 橘色 M=12.5 Y=25, 紫色 C=50 M=90, 75% 紫色 C=37.5 M=67.5, 50% 紫色 C=25 M=45 , 25% 紫色 C=12.5 M=22.5, 天藍色 C=80, 75% 天藍色 C=60, 50% 天藍色 C=40, 25% 天藍色 C=20, 黃色, 75% 黃色, 50% 黃色, 25% 黃色, AutoCAD Color, New Color Swatch 14
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000001, 60.000002, 39.999998, 19.999999, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000, 92.941201, 92.941201
Swatch Colorant Magenta         : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 37.500000, 25.000000, 12.500000, 50.000000, 37.500000, 25.000000, 12.500000, 90.000004, 67.500001, 44.999999, 22.500002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 87.843102, 87.843102
Swatch Colorant Yellow          : 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 50.000000, 25.000000, 89.019603, 89.019603
Swatch Colorant Black           : 0.000000, 100.000000, 80.000001, 60.000002, 39.999998, 19.999999, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 80.000001, 80.000001
Swatch Colorant Tint            : 100.000000, 100.000000
Page Count                      : 3
Creator                         : Adobe Illustrator(R) 13.0
For                             : user,
Bounding Box                    : -36 -632 878 36
Creator Version                 : 13
Container Version               : 9

EXIF Metadata provided by EXIF.tools