GIGA BYTE TECHNOLOGY GN-WLCM201 Compact Flash WLAN Card User Manual 2

GIGA-BYTE TECHNOLOGY CO., LTD. Compact Flash WLAN Card 2

Manual

Download: GIGA BYTE TECHNOLOGY GN-WLCM201 Compact Flash WLAN Card User Manual 2
Mirror Download [FCC.gov]GIGA BYTE TECHNOLOGY GN-WLCM201 Compact Flash WLAN Card User Manual 2
Document ID317887
Application IDKJYYBNId3pus5asHh7kQlQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize17.29kB (216184 bits)
Date Submitted2003-04-14 00:00:00
Date Available2003-04-14 00:00:00
Creation Date2003-04-07 11:52:08
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2003-04-08 10:27:32
Document Title2
Document CreatorAcrobat PDFMaker 5.0 for Word
Document Author: Andy Chen

GN-WLCM201
IEEE 802.11b Compact Flash Wireless LAN Card
User’s Manual
http://www.gigabyte.com.tw
Rev. 1.0 First Edition
Contents
CHAPTER 1. PRODUCT OVERVIEW ..........................................................................................1
1-1. INTRODUCTION TO THE WIRELESS LAN CARD ...............................................................1
1-2. FEATURES .................................................................................................................1
1-3. PHYSICAL DIMENSIONS/PACKAGING .............................................................................1
1-4. LED INDICATING LIGHT ...............................................................................................2
1-5. SYSTEM REQUIREMENTS ............................................................................................2
1-5-1. Supported Platform .........................................................................................................2
1-5-2. Supported Operation System........................................................................................2
CHAPTER 2. INSTALLING THE WIRELESS LAN CARD........................................................3
2-1. INSTALLING THE DRIVER & UTILITY ............................................................................3
CHAPTER 3. SPECIFICATIONS ...................................................................................................5
Chapter 1. Product Overview
1-1. Introduction to The Wireless LAN Card
This wireless Local Area Network (LAN) card is composed of the IEEE 802.11b MAC with
CompactFlash interface, Baseband, radio components, and two built-in antennas. This
product adopts the direct sequence spread spectrum (DSSS) technology using the
DBPSK, DQPSK, and CCK modulations to provide a very stable wireless communication
quality and an excellent signal receiver capability.
This product features the compact size, low power consumption, and power management
functions, and provides a high-speed wireless data communication. Therefore, this
product is ideally suitable for being integrated into the personal mobile and handheld
platform.
1-2. Features
Conforms to IEEE 802.11b specification.
Transmits data rate up to the maximum speed of 11Mbps.
Dynamically scales the data rate to 11, 5.5, 2, and 1Mbps.
Automatic power management to reduce battery consumption.
Built-in diversity antenna.
Supports 64-bit /128-bit WEP encryption.
Driver supports Windows CE3.0/4.1 and Windows 98SE/Me/2000/XP.
1-3. Physical Dimensions/Packaging
Dimensions: 55.4mm* 43mm* 3.3mm
This wireless LAN card conforms to the Compact Flash Type I standard. There is one
LED-indicating lights to indicate Act/Link status.
1-4. LED Indicating Light
Scanning: This LED blinks quickly when the card is scanning a network.
Associated: This LED is continuously on while the card is linked with the network.
1-5. System Requirements
1-5-1. Supported Platform
IBM PC/AT compatible computer
1-5-2. Supported Operation System
Windows CE3.0/4.1
Windows 98SE/Me
Windows 2000/XP
Chapter 2. Installing the Wireless LAN Card
2-1. Installing The Driver & Utility
Step 1: Please make sure that you don’t plug your card yet.
Step 2: Execute the setup.exe on our CD, and then the following window will pop up.
Step 3: Click “Next”.
Step 4:
Click “OK”.
Step 5: Click “Finish”, and then your installation is ok.
Chapter 3. Specification
System
Standards
IEEE 802.11b
Host Interface
Compact Flash (CF)Type I
Modulation
1Mbps: DBPSK; 2Mbps: DQPSK; 5.5 and 11 Mbps: CCK
Data Rate
1, 2, 5.5, 11 Mbps
Operating Voltage
3.3V
Power
Tx 250mA; Rx 200 mA; Sleep 40 mA
Operating Range
Open space: 100 - 300m; Indoor: 30 - 100m
RF
Frequency Band
2.400 ~ 2.484 GHz (subject to local regulation)
Radio Technology
DSSS (Direct Sequence Spread Spectrum)
Number of Channel
11 Channels (US, Canada)
4 channels (France)
14 Channels (Japan)
13 Channels (Most European countries, ETSI)
Output power
13 dBm@ Nominal Temp Range
Receive Sensitivity
Minimum - 80dBm@11 Mbps date rate; Typical –82dBm@11 Mbps date rate
Regulatory and Environmental Compliance
EMC certification
FCC part 15 (USA)
CE (Europe)
Temperature Range
Operating: 0 ~ 55 degree C, Storage: -20 ~ 65 degree C
Humidity
Max. 90% Non-condensing
Software
Driver
Windows CE 3.0/4.1; Windows 98/ME/2000/XP
Roaming
Full mobility and seamless roaming
Security
64 and 128 bit WEP
Management Utility
Link Configuration for network join and statistics
Mechanical
Dimensions
55.4mm * 43mm * 3.3mm
Weight
16 ± 1 g
Packaging
Generic, Gigabyte, private labeling optional
LED indicator
Power/Link status
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, (example - use only shielded interface
cables when connecting to computer or peripheral devices) any changes or modifications
not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users must be provided with specific operating
instructions for satisfying RF exposure compliance."

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2003:04:08 10:27:32+08:00
Subject                         : 1U and 2U Chassis MRS
Create Date                     : 2003:04:07 11:52:08+08:00
Page Count                      : 8
Creation Date                   : 2003:04:07 03:52:08Z
Mod Date                        : 2003:04:07 03:52:08Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Andy Chen
Metadata Date                   : 2003:04:07 03:52:08Z
Creator                         : Andy Chen
Title                           : 2
Description                     : 1U and 2U Chassis MRS
Page Mode                       : UseNone
Tagged PDF                      : Yes
EXIF Metadata provided by EXIF.tools
FCC ID Filing: JCK-GN-WLCM201

Navigation menu