GIGA BYTE TECHNOLOGY SB5204KOTTBK OTT BOX User Manual SB520 4K OTT BOX
GIGA-BYTE TECHNOLOGY CO., LTD. OTT BOX SB520 4K OTT BOX
User manual
SB520 4K OTT BOX USER MANUAL What’s in the box & how to set up your system system? SB520 HDMI Cable: Connect the HDMI cable to SB520 and to your TV LAN cable: If you use a wired network, connect the cable to the SB520 and to your router. If you use a wireless network, you will be able to set it up within the setting icon. IR cable: Connect the IR cable to SB520, then you could use IR remote controller. Prepare the remote control: Remove the plastic tab to enable battery contact before using your remote control for the first time Power Adapter: Connect the power adapter to your SB520 and to the wall outlet. *2 *8 Take to lock the vesa mount on your TV back And take to lock on the bottom side of SB520 Mount the SB520 on the back TV via VESA mount. Completing the set up 1. 2. 3. Turn on your TV make sure it’s tuned to the same HDMI input your SB520 is connected to You will either see a MBOX logo screen After BOX booting and you will be able to find out setting icon to: Set up your internet connection Adjust screen size to your TV Set up your language 4. Pressing the remote Up/Down arrows on the 4-way navigation keys of the Remote Control will allow you to view the list of available channels. FCC part 15.19: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: JCK-SB5204KOTTBK FCC part 15.105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. FCC part 15.21 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Exposure to radio frequency energy: This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. To comply with FCC RF exposure requirements, only use supplied antenna. The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with a separation distance of at least 20 cm from all persons.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 4 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 2b218c34-3e5b-11e5-0000-122cae87e7ca Producer : GPL Ghostscript 9.02 Keywords : () Modify Date : 2015:08:06 13:54:35+08:00 Create Date : 2015:08:06 13:54:35+08:00 Creator Tool : PDFCreator Version 1.2.2 Document ID : 2b218c34-3e5b-11e5-0000-122cae87e7ca Format : application/pdf Title : SB520 4K OTT BOX user manual Creator : josh.ku Description : () Author : josh.ku Subject :EXIF Metadata provided by EXIF.tools