GIGA TMS MP200A RFID Multi-ISO Protocol Scanner User Manual MP200A Ca EN

GIGA-TMS INC. RFID Multi-ISO Protocol Scanner MP200A Ca EN

Users Manual

MP200A 13.56MHz RFID Multi-ISO Protocol Scanner Introduction: MP200A is the latest RFID scanner GIGA-TMS released in year 2014. It supports multi-protocol RFID card includes ISO14443A, ISO 14443 B and ISO15693. Except RS232 interface, MP200A also supports USB HID Keyboard Mode which is easy to use and no additional USB driver is required. Applications: l Pre-payment, Ticketing l Prepaid parking / meal coupon l Multi-application: Tracking, Retail, Customer, Loyalty, Leisure, Gambling Features: l Enhanced anti-collision algorithm for multi-card handling l USB and RS232 Interface, 19200 N,8,1 l Full access to data of contactless memory, high security and microcontroller-based cards l Card TYPE NFC 1~4 TAGs ISO14443A ISO14443B ISO15693 Ordering information: l MP200A----RS232 & USB Interface ※ Specification is subject to change without notice. We welcome OEM inquiries ♦Custom design manufacturing is available♦Custom device programming is available♦Call factory for other configuration8F.,NO.31, LANE 169, KANG-NING STREET,HSI-CHIH,TAIPEI,TAIWAN TEL: 886-2-26954214 FAX: 886-2-26954213 e-mail: promag@ms24.hinet.net promag@gigatms.com.tw http://www.gigatms.com.tw TM
TM9 9 We welcome OEM inquiries Custom device programming is available 新北市汐止區康寧街 169 巷31 號8樓 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw 4Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:. Reorient or relocate the receiving antenna.. Increase the separation between the equipment and receiver.. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.. Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example -use only shielded interface cables when connecting to computer or peripheral devices).This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.MP200A13.56MHz RFID Multi-ISO Protocol Scanner

Navigation menu