GIGA TMS PWD100 UHF RFID Reader User Manual

GIGA-TMS INC. UHF RFID Reader Users Manual

Users Manual

      PWD100   UHF RFID Reader User Guide TM970212 Appil, 2017
  All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the written permission of the publisher.  Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective owners. The publisher and the author make no claim to these trademarks.  While every precaution has been taken in the preparation of this document, the publisher and the author assume no responsibility for errors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs and source code that may accompany it. In no event shall the publisher and the author be liable for any loss of profit or any other commercial damage caused or alleged to have been caused directly or indirectly by this document.   REVISIONS Rev Number  Date  Description 01  April, 2017  Initial Release   Copyright© 2014 GIGA-TMS INC. Printed in Taiwan
Contents  Introduction ........................................................................................................................ 1 Safety Certifications .......................................................................................................... 2 Package Contents .............................................................................................................. 4 Hardware ............................................................................................................................ 5 PWD100 Overview ............................................................................................................. 6 Set up PWD100 .................................................................................................................. 7 LED / BUZZER Indicators .................................................................................................. 8 Contact Us .......................................................................................................................... 9
                                                                    PWD100 User Guide 1 © 2014 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw Introduction A Gun Type Ultra High Frequency RFID Reader   PWD100 Reader is a compact RFID reader with the antenna and has a reading range up to 300 centimeters.  The reader is ideal for inventory control, cargo tracking, warehouse management, class management and other applications.  The utility software is supplied with the reader for configuration and demo operation.  This guide is for easy installation, configuration and demo operation of the PWD100 Reader.
                                                                    PWD100 User Guide              2 © 2014 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw Safety Certifications   Has been tested in accordance to essential protection requirements of the R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters and found the test results indeed meet the limitation of the relevant test standard(s) listed below:  EMC  Radio Spectrum  Safety EN 301 489 - 1: V1.8.1 (2008) EN 302 208 - 2: V1.3.1 : 2010 EN 60950 - 1: 2006+A11 : 2009+A1 : 2010EN 301 489 - 3: V1.4.1 (2002) EN 302 208 - 1: V1.3.1 : 2010     Test standard: FCC rules Part 15 subpart C 15.247 (2015) Test Result: No deviations from the technical specification(s) were ascertained in the course of the tests performed. Test standard: FCC rules Part 15 subpart B Test Result: Radiated Emission. FCC Part 15. 109 Class B. Test passed.
PWD100 User Guide3 © 2014 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.twFederal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.  This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.     This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions    (1) This device may not cause harmful interference and   (2) This device must accept any interference received, including interference that may cause undesired operation.
                                                                    PWD100 User Guide              4 © 2014 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw Package Contents   PWD100 Reader standard package: No.  ITEM  QUANTITY 1  PWD100 UHF RFID Reader  1 2  User guide  1 3  Power cable  1
                                                                    PWD100 User Guide              5 © 2014 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw Hardware   Specification :   CURRENT CONSUMPTION  65 mA AVG @ Standby mode 500mA AVG @ Scan mode RFID PROTOCOL SUPPORT  EPC Class 1 Gen 2, ISO18000-6C SUPPORT EPC DRM  YES FREQUENCY  US: 902~928 MHz EU: 865~868 MHz DEMODULATION  ASK or PRASK DATA ENCODING  FM0 or Miller code BACKSCATTERING LINK FREQUENCY  Supports uplink data rate of 40, 80,160,256, 320, 640 Kbps OUTPUT POWER  10~27dBm ANTENNA POLARIZATION    RHCP Battery  LI-on 2500mAh HOST INTERFACE  Bluetooth (Virtual COM port settings: 115200 bps,N,8,1) DIMENSIONS  180 x 75 x 70 mm WEIGHT  220 gm ENVIRONMENT  Operating Temp : -0  ~ +50℃℃ Humidity : 10 ~ 90 % Non-condensing
                                                                    PWD100 User Guide              6 © 2014 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw PWD100 Overview       Scan Key Antenna AreaLED IndicatiorDC Jack Power On/Off Key Buzzer Indicatior
                                                                    PWD100 User Guide              7 © 2014 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw Set up PWD100    To use PWD100 with your computer, you need a PC with a Bluetooth and one of the following operating systems: Wi‧ndows 7 / 8 / 8.1/10  Charge :     Use USB power cable connecter to PWD100 DC power jack and PC USB port.  Link :     Finish make a pair with Bluetooth, Open the DEMO software and select corresponds to the communication port.
                                                                    PWD100 User Guide              8 © 2014 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw LED / BUZZER Indicators Charge: STATUS DESCRIPTION GREEN LED  RED LED  BUZZER Charge  ON  OFF  OFF Charge OK  OFF  OFF  OFF Charge NG OFF  ON  OFF  Bluetooth: STATUS DESCRIPTION GREEN LED  RED LED  BUZZER Standby  Continuous Slow blink OFF  OFF Link OK  Continuous Blink twice OFF  OFF  Scan: STATUS DESCRIPTION GREEN LED  RED LED  BUZZER Standby  OFF  OFF  OFF Scanning  Blink  OFF  OFF  Search: STATUS DESCRIPTION GREEN LED  RED LED  BUZZER Searching (No Detect Tag) OFF  OFF  OFF Search OK  Blink 1 time  OFF  Beep one time
                                                                    PWD100 User Guide              9 © 2014 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw Contact Us   ADDRESS: 8F, NO.31, Lane 169, Kang-Ning Street, Hsi-Chih Dist, New Taipei City, Taiwan  TEL: 886-2-26954214  FAX: 886-2-26954213  WEBSITE: www.gigatms.com.tw  EMAIL: Sales & Product Inquiries - promag@gigatms.com.tw Product & Technical Support - support@gigatms.com.tw

Navigation menu