GN Audio USA GC-00004 Controller User Manual SS Nimbus QSG english draft

SteelSeries ApS Controller SS Nimbus QSG english draft

User Manaual.pdf

CONTENTS CONTROLLER QUICK START GUIDE STICKER COMPATIBILITY: -iOS -- Requires iOS 7 or later on one of the following devices: • iPhone 6, iPhone 6 Plus, iPhone® 5, iPhone 5c, iPhone 5s or later. • iPad® mini, iPad mini with Retina, iPad air, iPad 4th generation or later. • iPod® touch 5th generation or later. -MAC Support -- Works with Mavericks or later. INITIALIZATION 1. Turn on controller by sliding the lock switch on the back of the controller to the “unlcoked” position. Follow that by holding down the “menu” button for 1 second to turn on the controller. 2. LEDs will light up solid for the first five seconds, indicating battery life. 3. All four LEDs will light up towards the right to indicate that the controller is searching for a device. 4. To pair the Controller, go to your iOS device and follow the User Interface flow below: Settings > Turn On Bluetooth > Search for new Devices “SteelSeries Nimbus” will be displayed on the screen. Click to Connect via Bluetooth. 5. If the Controller has paired successfully, the LEDs will flash ON and OFF rapidly. 6. If the Controller is paired and the user starts a game, one of the four LEDs will light up solid, depending on the player number. 7. When the Controller battery charge gets low (~20 minutes remaining), the LEDs will start flashing continuously for 5 seconds.
Pairing: The Nimbus will remember the last paired iOS Device. When you reset the power on the Nimbus, it will automatically connect to the last paired iOS device. If you are already connected to an iOS device and want to change the device that you’re playing on, there are two ways to do this, as follows: If you want the controller to enter “pairing mode”, press the pairing button for 2 seconds. The LED’s should blink 1 and 2 followed by 3 and 4. This means that the controller is in pairing mode and will search for new devices Please go to www.steelseries.com/nimbus/faq for more detailed product information. Industry Canada statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Declaration d'exposition aux radiations:Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada etablies pour un environnement non controle. Le produit est sur pour un fonctionnement tel que decrit dans ce manuel. La reduction aux expositions RF peut etre augmentee si l'appareil peut etre conserve aussi loin que possible du corps de l'utilisateur ou que le dispositif est regle sur la puissance de sortie la plus faible si une telle fonction est disponible. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. 低功率電波輻射性電機管理辦法 第12條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性及功能。 第14條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Navigation menu