GN Audio USA HSC040W Bluetooth Headsets User Manual

GN Netcom Inc Bluetooth Headsets Users Manual

Users Manual

JabraEvolve 7581-04124 Ajabra.com/evolve75NEED MORE HELP?For all support go to jabra.com/support
Quick start guideJabraEvolve 75
Insert the USB dongle into your PC. The headset and the USB dongle are pre-paired.Hold the Bluetooth switch for 3 seconds. Wear the headset and follow the voice-guided pairing instructions.How to pairusing Bluetooth or USB dongle3 sec.
BusylightBattery LEDBluetooth LEDUSB charging port On/o/ BluetoothswitchVolume upbuttonVolume down buttonAnswer/end call buttonActive Noise Cancellation buttonMutebuttonMicrophone boom-armListen-in buttonHear your surroundings without taking o your headsetApprox. 3 hours to chargeUp for mute on &down for mute oHow to useHow to pairusing Bluetooth or USB dongle
Complies withIMDA StandardsDA102350CIDF15000193© 2017 GN Audio A/S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are regis-tered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Made in ChinaModel: HSC040WFCC ID: BCE-HSC040WIC: 2386C-HSC040W
Federal Communication Commission (FCC) Radiation Exposure Statement: Power is so low that no RF exposure calculation is needed. FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Radiation Exposure Statement: The SAR limit of IC is 1.6 W/kg averaged over one gram of tissue. Device types HSC040W has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly for head is 0.020 W/kg. IC statement: This Class B digital apparatus complies with Canadian ICES‐003. Cet appareil numérique de la classe B est conforme à la norme NMB‐003 du Canada.
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.

Navigation menu