GN Audio USA WHB060BS Mitel DECT base station User Manual BCE WHB060BS USerMan

GN Netcom Inc Mitel DECT base station BCE WHB060BS USerMan

Contents

BCE-WHB060BS USerMan

© 2016 GN Audio A/S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. Other trademarks and trade names are those of their respective owners.MADE IN CHINAMODEL: xxxxxxDeclaration of Conformity can be found on www.jabra.com/CP/US/declarations-of-conformity
Pro 930JabraQuick start guide
Attaching Jabra Triton to your desk phone1234411 Loosen the screws
2 XXXXXXXX.4 XXXXXXXX.3 XXXXXXXX.Slide the attachment fully open, and retighten the screws.Insert the screw and tighten it.Attach the dock to the back of the phone.
Assembling the headsetCharging the headset1. Align the headset and the headband attachment, as illustrated, and press firmly together until they click into place (snap-to-click).2. Rotate the microphone boom arm for left or right ear use.3. Adjust the length of the headband for the optimal fit.CLICKDock the headset in the base. When docked correctly the headset battery will begin charging. It takes approx. XX hours to fully charge the headset.
LED StatusBattery charging (slow ash)Full batteryMedium batteryLow batteryVery low battery (fast ash) Microphone muted Active audio link between headset and baseSearching for headsetUsing the headsetUsing the baseAnswer/end butttonLED indicatorSpeaker volume downSpeaker volume upMute
1 Loosen the screws2 Slide the attachment and retighten
3 Attach the dock4 Insert the screw and tighten

Navigation menu