GN Audio USA WHB060BS Mitel DECT base station User Manual BCE WHB060BS USerMan

GN Netcom Inc Mitel DECT base station BCE WHB060BS USerMan

Contents

BCE-WHB060BS USerMan

© 2016 GN Audio A/S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth®
word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by GN Audio A/S is under license. Other trademarks and trade names are those of
their respective owners.
MADE IN CHINA
MODEL: xxxxxx
Declaration of Conformity can be found on
www.jabra.com/CP/US/declarations-of-conformity
Pro 930
Jabra
Quick start guide
Attaching Jabra Triton to your
desk phone
1
2
3
4
4
1
1 Loosen the screws
2 XXXXXXXX.
4 XXXXXXXX.
3 XXXXXXXX.
Slide the attachment fully open, and retighten the screws.
Insert the screw and tighten it.
Attach the dock to the back of the phone.
Assembling the headset
Charging the headset
1. Align the headset and the headband attachment, as
illustrated, and press firmly together until they click into place
(snap-to-click).
2. Rotate the microphone boom arm for left or right ear use.
3. Adjust the length of the headband for the optimal fit.
CLICK
Dock the headset in the base. When
docked correctly the headset battery will
begin charging. It takes approx. XX hours
to fully charge the headset.
LED Status
Battery charging (slow
ash)
Full battery
Medium battery
Low battery
Very low battery (fast ash)
Microphone muted
Active audio link between
headset and base
Searching for headset
Using the headset
Using the base
Answer/end buttton
LED indicator
Speaker volume down
Speaker volume up
Mute
1 Loosen the screws
2 Slide the attachment and
retighten
3 Attach the dock
4 Insert the screw and tighten

Navigation menu