GN Hearing A S FD-1 Wireless Hearing Instrument User Manual

GN Hearing A/S Wireless Hearing Instrument Users Manual

Users Manual

Download: GN Hearing A S FD-1 Wireless Hearing Instrument User Manual
Mirror Download [FCC.gov]GN Hearing A S FD-1 Wireless Hearing Instrument User Manual
Document ID1266579
Application IDp0+/G4iVtpIFIGygMlygaw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize38.74kB (484240 bits)
Date Submitted2010-04-14 00:00:00
Date Available2010-06-01 00:00:00
Creation Date2010-04-09 16:56:38
Producing SoftwareAdobe PDF Library 8.0
Document Lastmod2010-04-09 16:57:43
Document TitleUsers Manual
Document CreatorAdobe InDesign CS3 (5.0.4)

Airlink installation
Airlink is a USB plug and play programming interface
enabling you to fit wireless hearing Instruments from
ReSound and Beltone.
1) Before you insert the Airlink dongle make sure that
you have the correct fitting software installed. The
Airlink driver is installed during fitting software installation.
• Airlink is supported by ReSound Aventa 3.0
(or later).
• Airlink is supported by Beltone Solus Pro 1.0
(or later).
2) After successful installation insert the Airlink dongle
into any USB port on your PC or docking station.
See illustration below.
3) You are now ready to start fitting wireless ReSound
and Beltone products using ReSound Aventa 3 and/
or Beltone Solus Pro 1.0
Compatibility
Airlink supports the following operating systems:
Windows XP, Windows Vista and Windows 7
• Airlink is compatible with ReSound Aventa 3.0 (or later). Airlink works with all ReSound’s wireless (WL)
hearing instrument models released with ReSound
Aventa 3.0 or later.
• Airlink is compatible with Beltone Solus Pro 1.0 (or
later). Airlink works with all Beltone’s wireless (WL)
hearing instrument models released with Beltone
Solus Pro 1.0 or later.
Do not attempt to use Airlink together with any
other fitting software unless explicitly instructed.
Airlink can co-exist on the same PC together with
other hearing instrument programming interfaces (i.e.
Speedlink, Hi-PRO, NOAHlink) when using any other
fitting software modules.
For your safety, carefully read the chapter Important
Information.
FCC ID: X26FD-1
Statement:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
Changes or modifications can void the user’s authority
to operate the equipment.
Intended use
The Airlink USB is intended to wirelessly transfer signals from a fitting PC to wireless hearing instruments
defined and available in ReSound Aventa 3 and Beltone Solus Pro, enabling the fitter to adjust instrument
settings wirelessly.
List of countries
Products are intended for sale in countries within European Economic Area as well as Switzerland. In addition products are intended for worldwide sales.
These products are intended for worldwide sales, and
in compliance with the following regulatory standards:
In EU: The device conforms to the Essential Require-
ments according to - Annex I of Council Directive
93/42/EEC for medical devices (MDD) - and essential
requirements and other relevant provisions of Directive
1999/5/EC (R&TTE). The declaration of conformity may
be consulted at www.resound.com.
In US: All test objects are subject to FCC Certification
according to FCC CFR 47 Part 15, subpart C, section
15.247
For the Norwegian market the accessories comply to
EN 12182 Technical Aids for disabled persons. General
requirements and test methods covered by EMC and
electrical safety tests according to EN/IEC 60601-1-2
and EN/IEC 60950.
Other identified applicable international regulatory requirements in countries outside EU and US. Please
refer to local country requirements for these areas.
Products are categorized as receiver class 2 according
to Directive 1999/5/EEC on Radio Equipment and Telecommunications Terminal Equipment (R&TTE)
Important information
Maintenance and care
• Cleaning ReSound Airlink is usually not necessary. If
needed, use a soft, dry cloth.
• Do not attempt to open the device – no serviceable
parts inside. If service is required please return the
Airlink to your local sales representative or manufacturer.
General warnings
• Keep this device out of reach of children under 3
years.
• Airlink uses low-powered digitally coded transmissions in order to communicate with other wireless
devices. Although unlikely, nearby electronic devices
may be affected. In that case, move Airlink away from
the affected electronic device.
• When using Airlink and the device is affected by
electromagnetic interference, move away from the
source.
• Airlink must not be used for any other purpose than
for hearing instrument fitting.
General precautions
• Your hearing instrument and this device were given
a unique communication network code during the
fitting. This ensures that the device will not affect
hearing instruments worn by others.
• High-powered electronic equipment, larger electronic installations and metallic structures may significantly reduce the operating range.
• Use only original ReSound accessories.
• Do not make any changes or modifications to this
device.
• Do not use Airlink in areas where RF transmission is
prohibited, e.g. air planes etc.
• Only connect Airlink to connections which it is explicitly intended for.
Technical Specifications
Operating range:
3 meters
Power supply:
Powered by the USB port
of a PC
Wireless:
2.4 GHz
Operating temperature: 0 to 55 degree C
Storage temperature: -20 to 70 degree C
Temperature test, transport and storage information
The product are subjected to various tests in temperature and damp heating cycling between -25 C and
+70C according to internal and industry standards.
Warranty
The Airlink programming interface is covered by a
limited warranty issued by the manufacturer for a
period of 12 months from the day of the original
purchase. Please notice that extended warranties
may apply in your country. Please contact your local
hearing instrument manufacture.
Be aware of information marked with the warning symbol
WARNING points out a situation that could lead
to serious injuries, CAUTION indicates a situation
that could lead to minor and moderate injuries
Advice and tips on how to handle your Airlink
better.
Equipment includes RF transmitter.
Disposal
In order to minimize environmental pollution, dispose
the product according to local standards and national
regulations.
Any issues relating to the EU Medical Device Directive
93/42/EEC and R&TTE Directive 1999/5/EEC  should
be directed to GN Hearing A/S.
GN Hearing A/S
Lautrupbjerg 7
DK-2750 Ballerup
Denmark
Tel.: +45 45 75 11 11
Fax: +45 45 75 11 19
17399400-GB-10.03. Rev A

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Signing Date                    : 2010:04:09 16:57:43+02:00
Signing Authority               : ARE Acrobat Product v8.0 P23 0002337
Annotation Usage Rights         : Create, Delete, Modify, Copy, Import, Export
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23
Instance ID                     : uuid:193d0dbe-bf44-484e-98f8-5030345d8881
Document ID                     : adobe:docid:indd:3d991199-3cb8-11df-99e1-f1119eee30b8
Rendition Class                 : proof:pdf
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:9E0D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A00D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A20D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A40D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A20D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A20D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A40D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A20D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:F990DB0CD53CDF11BA5FA16C98E5C1E0, uuid:51350C422DDE11DB858FD3922BB0DA05, uuid:A60D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:B14741F15607DF11A8E6B620E7D2AC64
Manifest Reference Document ID  : uuid:9D0D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:9F0D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A10D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A30D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A10D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A10D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A30D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:A10D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:F890DB0CD53CDF11BA5FA16C98E5C1E0, uuid:51350C412DDE11DB858FD3922BB0DA05, uuid:A50D8BD6C73CDF11BA5FA16C98E5C1E0, uuid:B04741F15607DF11A8E6B620E7D2AC64
Create Date                     : 2010:04:09 16:56:38+02:00
Modify Date                     : 2010:04:09 16:57:43+02:00
Metadata Date                   : 2010:04:09 16:57:43+02:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 4023 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 2
Creator                         : Adobe InDesign CS3 (5.0.4)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: X26FD-1

Navigation menu