GOLDEN CHINA AUDIO HX-P280 Jam Tag-A-Long User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2914123
Application ID	eltSHegouJ5rJiaDzqDr9A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.17kB (214615 bits)
Date Submitted	2016-02-28 00:00:00
Date Available	2016-02-28 00:00:00
Creation Date	2016-01-27 15:13:44
Producing Software	Foxit Phantom Printer Version 3.0.3.0804
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual

AOK UI INTRUCTION for HX-P280
TABLE OF CONTENT
Change history…………………………………………………………………………………………………………………………………………………………………………………2
1.
Product setting…………………………………………………………………………………………………………………………………………………………………………………2
2.
System feedback………………………………………………………………………………………………………………………………………………………………………………4
3.
Product states………………………………………………………….………………………………………………………………………………………………………………………6
Change History
Issue
Date
Handle by
Comments
00
November-4-2015
Mir xie
First release
1. Product setting: buttons, LEDs, Audio sources
2.1 Buttons and switches and Touch, the systems have below buttons:
Button
Power button, MFB, Vol+, Vol- butt on
2.2 Connection of Power and audio system, the system has the following connection:
In
Aux-in
Out
Audio port
Data port
In
DC jack
Out
USB out for charging
Power port
2.3 Button press Type and Duration. The following table describes how the buttons react and describes timing constraints
Button press ing time
Press type
Duration(Seconds)
Short press
X<0.5
Long press
2 10%
ii . Low: 5% < X ≤ 10%
- Low battery indication available (Red LED
flashing warning)
-when X>95% charging Red LED off
iii. Critical: X = 5%
- DUT off.
Connection
ERP(Energy
related
product) compliance
Audio input
Aux in, BT audio
Audio output
No
Physical button for audio switch
No special button available
Auto audio switch feature
Aux-in audio source priority to BT audio.
Auto Standby
Yes
Auto Standby Duration
Without BT connection, after 2 minutes ,it will
shut off .
BT connection,but don't play, after 15 minutes,it
will s hut off .
Reset
Bluetooth connectivi ty
Power consumption to meet ERP
<0.3W
Auto shut off without paired
2 minutes
Factory Reset
Not
Hardware Reset
Yes
Bluetooth naming
Jam Tag-A-Long
Wireless range
10 m
Supported audio codec
SBC
Supported profiles
A2DP, AVRCP so on
# of supported device in pairing list
1 paired device recorded
Supports Dual devices
NO
Volume sync
Synchronize volume w ith iOS
BT Pairing duration
Within 1 minutes
BT R econnect duration
Power up = 10sec
Link lost = 10sec
BT reconnect method (single device or all devices)
Power up = attempt reconnect to same device.
Link lost = attempt reconnect to s ame dev ice
tw ice, each time for 10 seconds
PC c ompatibility
Phone
device
Windows version
No information
Mac version
MacBook (Pro, Air) with OS X 10.8.2 or later
Phone m odel with OS version
iPod touch (2-5 Gen), iPod Nano (7 Gen),
compatibility
iPhone (6,5, 4s, 4, 3Gs, 3G), iPad (1, 2, 3, 4,
mini 1, 2),
2.5 Audio source, Available audio source Input:
Audio input
Line (3.5mm) In
Bluetooth
Image
2.6 Available Audio Source Output: No audio output
Sequence & Priority
The audio source switch command shall allow DUT to switch sources using the following priority and sequence:
Priority
Audio input
Sequence
Default
Manual/Automatic
switch
Line (3.5mm) In
Line in is 1st
For Speaker is default.
NA
Bluetooth
BT is 2nd
Speaker, is default
NA
2. SYSTEM FEEDBACK
3.1 The system has the following indicators, list of Audio Indications. (Prompt tone)
Indicator
Desc ription
File Name
Power on
Hold dow n the power button 3 seconds
Provide by HMDX
Power down
Hold dow n the power button 3 seconds
Provide by HMDX
Auto power off
No Bluetooth connection and Audio input
Provide by HMDX
Low batt ery warning
The batt er low 3.5 Volts
No
BT Pairing started
Blue LED flashing
Provide by HMDX
BT pairing successfully
Blue lights flash once f ive seconds
Provided by HMDX
BT pairing timeout
Blue LED flashing
No
BT disconnect manually
After pressing Vol+ button and Vol- button 5
Provided by HMDX
seconds, t hen enter into paring status
9
BT disconnect – link lost
Entering into paring status
No
10
BT reconnect successful
As pairing successful
Provided by HMDX
11
BT reconnect timeout
Entering into paring status
No
12
Max volume reached
Reminder
Provided by HMDX
13
Min v olume reached
no
No
3.2 List of Physical Visual Indications
Product off, USB connected
Indicator
color
Description
P roduct LED
null
off
Charging LED
Solid as long as charging. Off when charging complete
●
Power off and USB not connected
Indicator
color
Description
P roduct LED
null
off
Charging LED
null
off
Powering up
Indicator
color
P roduct LED
Description
On
●
Powering down
Indicator
color
Description
P roduct LED
null
off
P roduct on
Event
indicator
color
Aux audio source
Product LED
BT audio source
Product LED
Description
Aux as active audio source
●
●
1.
At Re-connect or P airing mode, Product LED flashing
2.
Af ter paired, Blue lights flash once five seconds
Charging mode
Event
Indicator
Charging
Charging LED
color
Description
Solid as long as charging. Off when charging complete.
●
Battery mode
Event
indicator
color
Description
Battery healthy
Charging LED
null
Charging LED off, not required
Battery low
P roduct LED
Battery critical
All LEDs
●
null
Flashing 1 sec on, 1 sec off until USB cable is inserted or battery died.
Off, device is off.
BT activity (The Flashing LED 0.2 seconds on and 0.2 seconds off)
Event
indicator
BT not active
Product LED
BT pairing
Product LED
BT connected
Product LED
BT disconnecting
Product LED
color
Description
Aux as active audio source.
●
Speaker: Blue LED Slow flashing (0.2sec on, 0.2sec off ) for 2min or until paired
●
successfully. Blue lights flash until the pairing is successful
Speaker: Blue LED stable on .B lue lights flash once five seconds
●
Pressing Vol+ and Vol- simultaneously for 5 seconds, disconnect current BT device,
●
enter into pairing mode
Factory Reset
indicator
color
Description
Product LED
null
Unknown
3. Product status
State
Desc ription
Off
Details: When device is Off without USB connected or Power off (MCU off, Amp off, c harging off, BT off,)
To Enter: Removed USB cable and battery off
To Exit: Insert USB cable charging
On
Details: Device is on (MCU on, Amp on, charging on, BT on – connectable)
To Enter: Power on
To Exit: Power off
BT on
Details: Device is on (MCU on, Amp on, charging on, BT on – discoverable, connected, connecting)
To Enter: BT activity in progress
To Exit: Power off
Key Assignment
Power switch
States vs Press type
On position
Off position
On
Power on
Off
Power off
States vs Press type
SP (<0.5)
LP >2~3s)
On
Play or pause
No response
On-aux inserted
Play or pause
No response.
BT on power up reconnect
No response
No response
BT on pairing
No response
No response.
BT on connected
Play/pause
No response
Play/Pause
 or 
States vs Press type
SP (<0.5)
LP >2~5s)
Off
No response
No response
On
Change volume by 1 step.
No response
On-aux inserted
Change volume by 1 step
Change volume continuously.
BT on power up re-connect
Change volume by 1 step.
No response
BT on pairing
Change volume by 1 step.
No response
BT on connected
Change volume by 1 step.
next or previous
Vol+ and Vol- pressing at the same time
transfer other language
Disconnect current BT, enter into
pairing mode.
4. UI
Refer to “SPC-0028 - HMDX Controls Logic Specification - Bluetooth Loudspeakers(D)” for the UI flow chart
5. FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 8
Author                          : 
Create Date                     : 2016:01:27 15:13:44+08:00
Creator                         : 
Producer                        : Foxit Phantom Printer Version 3.0.3.0804
Subject                         : 
Title                           : 

EXIF Metadata provided by EXIF.tools