GPD Technology GPDPOCKET2 GPD Pocket 2 User Manual
Shenzhen GPD Technology Co., Ltd. GPD Pocket 2 Users Manual
Users Manual
Chapter one Start to learn your computer
FCC ID: 2AJQ5GPDPOCKET2
Model Name : Pocket 2
Chapter Two Basic Operation
st-time Use
Please read the user`s manual
Please read the user`s manual before operating your computer
Connect the power supply
。The battery module is not full charged when finish the production.
If you want to charge the battery and use computer, please connect the computer t
o the outlet.
Turn on the computer
Press the power button to turn on the computer
Enter the operation system
The operation system has been set after production
Use the keyboard
The keyboard is a integrated highly QWERTY keyboard. The default output for first ro
w is number keys. If you want to switch to F1-F12 button/ special character just need
to press the Fn/Ctrl at the same time.
PgUp、Home、PgDn、End 、、、 重叠，默认输出为
PgUp/Home/PgDn/End and buttons overlap, the default output is
, press the Fn button to switch to PgUp/Home/PgDn/End modes.
Use touch screen
Touch screen operation is supported.
If water drop or drink drops on the screen, the touch screen operation will be disabled.
The touch screen controller can recognize dust automatically, but too much dust will de-
crease the sensibility of the touch screen.
Before clean the touch screen, please plug off the power line. Please make sure the to-
uch screen is on the power shutdown condition, clear the screen with clean and soft cl-
othe lightly.( It is better to use the glasses cloth. Please don`t spray to the screen direc-
tly.
To connect external devices
Your computer has many built in function and outer joins, such as memory HDMI / U-
SB flash disk, etc.
Connection universal serial bus (USB) device
Your computer has two USB port.
：Note:
When use large power USB device(such as USB driver),please use the external device
power adapter. Otherwise, the device will probably can not be recognized/used, or the s-
ystem will power off.
Connect the Bluetooth device
Your computer has Bluetooth function built in, you can connect with other Bluetooth d-
evices such as notebook PDA and cellphone to transfer data. In open space, the data c-
an be transferred within 10 meters.
Note:
The actual connection distance will be different by many interference factors. If you wa-
nt a best transfer speed, please close the device to the computer.
The chapter three Use Internet
As a global network, internet has connected the worldwide computers and provide servi-
ce such as emails message search, e-commerce, website browse and entertainment.
You can use methods to connect computer to Internet
Wire connection
Note: before connection, please make sure you have a adapter to switch USB to R145.
Connection steps
Insert the USB cable of the adapter to the USB Host
Insert the crystal cable to the R145 jack
When the system tray shows””, that means connect successfully.
Wireless connection
Note: Wi-Fi connection displays
Connection steps
Click the Wi-Fi logo on bottom right corner of the system tray
Click certain Wi-Fi account
Click to connect
Input the pass words
Click the connect
When the system tray diplay , that means connect successfully.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.