GPI KOREA RF900R Wireless Microphone Receiver User Manual Microsoft PowerPoint Manual RX

GPI KOREA, Inc Wireless Microphone Receiver Microsoft PowerPoint Manual RX

User Manual

•WARRANTY SERVICE CARD
WARRANTY CARD
WARRANTY
CARD
PRODUCT NAME Wireless Transceiver System PERIOD
MODEL NAME GPWM-900 1 YEAR
From the
date of
p
urchase.
PURCHASE DATE . . 201_
WARRANTY PERIOD
. . 201
GPWM-900
WIRELESS TRANSMITTER SYSTEM
p
WARRANTY
PERIOD
.
.
201_
CUSTOMER’S ADDRESS : NAME :
TEL :
AGENT’S ADDRESS : NAME :
User’s Guide
TEL :
* Be sure to fill in blanks when the unit is sold
We grant 1 year warranty on the product commencing on the
date of purchase. Within the warranty period, the manufacturer
will correct free of charge any defect in the unit resulting from
will
correct
,
free
of
charge
,
any
defect
in
the
unit
resulting
from
faults in materials or workmanship, either by repairing or
replacing the entire unit as manufacturer may choose.
This warranty does not cover: damages due to improper use,
normal wear and tear, or defects that have a negligible effect on
the value or operation of the unit. The warranty is void if repairs
dtk b thi d dif ii l
are un
d
er
t
a
k
en
b
y unau
th
or
i
ze
d
persons an
d
if
or
i
g
i
na
l
parts are not used.
To obtain service within the warranty period, bring in or ship the
complete unit with your purchase invoice to a Customer
Service Center.
●Read this user’s guide carefully for safe operation and proper
use of the product .
●
Features and specifications are subject to change without
●
Features
and
specifications
are
subject
to
change
without
notification.
WARNING This device complies with Part 15 of the FCC Rules.
* Please turn off the power before connecting or
disconnecting any cables.
- Do not immerse in water or keep in humid areas
- Do not place near TV, speakers, or other electronic devices
Before installation check power supply and voltage to avoid
pera
on
s su
ec
o
e
o
ow
ng
wo con
ons :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
CAUTION :
Changes or modifications not expressly approved by
-
Before
installation
,
check
power
supply
and
voltage
to
avoid
hazards
- Do not apply force or shock to the unit
- Do not disassemble the unit
CAUTION
:
Changes
or
modifications
not
expressly
approved
by
the party responsible for compliance could void the user authority to
operate this device.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
TECHNICAL SPECIFICATIONS
Operating Voltage TX: 3.7VDC RX: 12VDC
Frequency Range
902MHz
~
928MHz
These
limits
are
designed
to
provide
reasonable
protection
against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
Frequency
Range
902MHz
928MHz
Operating Range Up to 5000 feet at the open field
* Note : Operating Range can be different
according to the environment
Operating Temperature 10 ~ 110 °F
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
LED Indicators TX: low battery warning, Out of Range,
Talk On, Mute
RX: Charging indicator, Talk On
Jacks 8 pin RJ-45 for power, audio out, and
ti t
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
t
r
i
gger ou
t
Battery Capacity: Lithium-Ion-Polymer 3.7V
DC/1800mA
Charging time: Max. 3 hours
Talk Time: Min. 12 Hours
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body. This transmitter must not be
110
co-located or operated in conjunction with any other antenna or
transmitter.
OPERATION (TX) Warning
(1) Immediately discontinue use of the battery if, while using, chargi
ng or storing the battery the battery emits an unusual smell
15
3
7
4
ng
,
or
storing
the
battery
,
the
battery
emits
an
unusual
smell
,
feels hot, changes color, changes shape, or appears abnor
mal in any other way. Contact your sales location or Panaso
nic if any of these problems are observed.
(2) Do not place the batteries in microwave ovens, high-pressure co
ntainers or on induction cookware
2
6
ntainers
,
or
on
induction
cookware
.
(3) In the event that the battery leaks and the fluid gets into one’s ey
e, do not rub the eye. Rinse well with water and immediatel
y seek medical care. If left untreated the battery fluid could c
ause damage to the eye.
Caution
1Rec Talk , Mute On/Off 6 Internal MIC
2 BEEP and Vibration 7 Power On/Off
3Talk , Mute and out of range
LED
Caution
(1) If the device is to be used by small children, the caregiver sho
uld explain the contents of the user’s manual to the childr
en. The caregiver should provide adequate supervision to
insure that the device is being used as explained in the u
ser
’
s manual.
4 Battery LED
5 Microphone Jack
1. REC On/Off button
* LED : REC & Talk On – Green LED On
Mute On – Red LED On
ser s
manual.
(2) When the battery is worn out, insulate the terminals with adhe
sive tape or similar materials before disposal.
Danger
Be sure to follow the rules listed below while char
g
in
g
the batter
y
.
Low Battery – 50 ~ 25% Red LED blinking
25% under Red LED on
Out of Range – Green LED blinking
2. Beep: Beep Tone
3. Mode: Bee
p
and Vibration
gg y
Failure to do so may cause the battery to become hot, ex
plode, or ignite and cause serious injury.
· When charging the battery, either use a specified battery charg
er or otherwise insure that the battery charging conditions
specified by Panasonic are met.
p
4. Mute On/Off:
When user want to mute the voice in the Communication.
Press the Red button to mute and press the button again to talk.
5. Microphone Jack (* Lapel MIC is optional)
6. Internal MIC
· Do not attach the batteries to a power supply plug or directly to
a car's cigarette lighter.
· Do not place the batteries in or near fire, or into direct sunlight.
When the battery becomes hot, the built-in safety equipm
ent is activated preventing the battery from charging furt
3 8
7. Power On/Off: Turn on/off the power of unit. When this is turned
off, Unit will not work.
ent
is
activated
,
preventing
the
battery
from
charging
furt
her, and heating the battery can destroy the safety equip
ment and can cause additional heating, breaking, or igniti
on of the battery.
PIN DESCRIPTION BATTERY CHANGE
RJ-45 Connector Pin Description
Pin# 1: Audio Signal
18
8
1
Pin# 2: Ground
Pin# 3: Transmitter Status
8
1
Pin# 4: Transmitter Control
Pin# 5: TXD
- Unscrew these nuts on backside of TX
- Then separate battery back with connector
Pin# 6: RXD
- Insert a new battery with connector.
- Assemble battery cover as initial
- Tighten these screws on backside of TX
- Before using, please assemble battery cover completely
Pin# 7 : DC 12V
Pin# 8 : Ground
Pin#
8
:
Ground
5 6
OPERATION (RX)
Li-Ion Battery Safety Precautions (sample document)
1. When Using the Battery
Danger
1
Danger
(1) Misusing the battery may cause the battery to get hot, explode,
or ignite and cause DANGER serious injury.
Be sure to follow the safety rules listed below:
Do not place the battery in fire or heat the battery
4
5
.
Do
not
place
the
battery
in
fire
or
heat
the
battery
.
.Do not install the battery backwards so that the polarity is revers
ed.
.Do not connect the positive terminal and the negative terminal of
the battery to each other with any metal object (such as
1 Antenna connection (external Antenna)
2LED : Recordin
g
ON/OFF
,
ID Matchin
g
3
2
wire).
.Do not carry or store the batteries together with necklaces, hairpi
ns, or other metal objects.
.Do not penetrate the battery with nails, strike the battery with a h
ammer
,
ste
p
on the batter
y,
or otherwise sub
j
ect it to stro
g, g
3 LED : Battery Charging Status
4 Charging PIN
5 RJ-45 Jack
,p y, j
ng impacts or shocks.
.Do not solder directly onto the battery.
.Do not expose the battery to water or salt water, or allow the batt
ery to get wet.
1. Antenna Connection
2. LED : REC & Talk On/Off – Green LED On/Off
ID Matching On – Green LED blinking
3. LED : Battery Charging – Red LED on
Battery is fully charged – Red LED off
(2) Do not disassemble or modify the battery. The battery contain
s safety and protection devices which, if damaged, may c
ause the battery to generate heat, explode or ignite.
(3) Do not place the battery on or near fires, stoves, or other high-
temperature locations. Do not place the battery in direct s
4. Charging Pin
5. RJ45 Jack for the cable
unshine, or use or store the battery inside cars in hot wea
ther. Doing so may cause the battery to generate heat, ex
plode, or ignite. Using the battery in this manner may als
o result in a loss of performance and a shortened life exp
ectancy.
7 4
(4) Do not insert the battery into equipment designed to be herme
tically sealed. In some cases hydrogen or oxygen may be
discharged from the cell which may result in rupture, fire
or explosion.
FUNCTIONS
-500Channel Possible in the 902~928MHz Bandwidth
- Transmission Range up to 5000 feet in open field
- Audible and LED indicator out of range warning.
- Better voice quality.
Warning
Do not continue charging the battery if it does not recharge withi
n the specified charging time. Doing so may cause the battery to
become hot, explode, or ignite.
Risk of explosion if battery is replaced by an incorrect type.
Di f d b tt i di t th i t ti
-40 bits security code combination.
- Charger Status Indicator
- Mute function On/Off Key (Transmitter)
- Auto link (When the system On/Off is On mode)
Recorder On/Off S itch
Di
spose o
f
use
d
b
a
tt
er
i
es accor
di
ng
t
o
th
e
i
ns
t
ruc
ti
ons.
2. While Charging
Caution
The tem
p
erature ran
g
e over which the batter
y
can be ch -
Recorder
On/Off
S
w
itch
- Transmitter Power On/Off switch
- Low Battery Indicator (Transmitter)
- Link LED indicator (Transmitter & Receiver)
-
Beep Mode and Vibration Mode Selectable for user
’
s convenience
pg y
arged is 10°C to 45°C. Charging the battery at te
mperatures outside of this range may cause the
battery to become hot or to break. Charging the
battery outside of this temperature range may al
so harm the performance of the battery or reduc
e the battery
’
s expectancy
-
Beep
Mode
and
Vibration
Mode
Selectable
for
user s
convenience
TROUBLESHOOTING
e
the
battery s
expectancy
.
3. When Discharging the Battery
Danger
Do not discharge the battery using any device except for
the specified device When the battery is used in
Problems Check Points
No reception - Check the battery status
- Check the connection and cables
- Check the communication range
the
specified
device
.
When
the
battery
is
used
in
devices aside from the specified device it may d
amage the performance of the battery or reduce
its life expectancy, and if the device causes an a
bnormal current to flow, it may cause the battery
to become hot, explode, or ignite and cause seri
ij
Poor reception,
static, noise
- Change the location of RX Set
- Check the communication range
- Check to see if unit is placed near TV,
speakers, or other electronic devices
-
Check the battery status
ous
i
n
j
ury.
Caution
The temperature range over which the battery can be dis
charged is -10°C to 60°C. Use of the battery out
side of this tem
p
erature ran
g
e ma
y
dama
g
e the
9 2
Unit does not
respond
Check
the
battery
status
- Check the power switch on the bottom of
the unit
- Check the connection and cables
pgyg
performance of the battery or may reduce its life
expectancy
MEMO
FCC Information to User
This equipment has been tested and found to comply with the limits for a Clas
s B digital device, pursuant to part 15 of the FCC Rules. These limits are desi
gned to provide reasonable protection against harmful interference in a reside
ntial installation. This equipment generates uses and can radiate radio freque
ncy energy and, if not installed and used in accordance with the instructions,
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
GPWM-900RX2GN(Receiver) complies with FCC radiation exposure limits
set forth for an uncontrolled environment. GPWM-900RX2GN(Receiver)
should be installed and o
p
erated with minimum distance 20cm between the
may cause harmful interference to radio communications. However, there is n
o guarantee that interference will not occur in a particular installation. If this eq
uipment does cause harmful interference to radio or television reception, whic
h can be determined by turning the equipment off and on, the user is encoura
ged to try to correct the interference by one or more of the following measures
:
—
Reorient or relocate the receiving antenna
p
radiator & your body.
GPWM-900RX2GN(Receiver) must not be co-located or operating in
conjunction with any other antenna or transmitter.
RSS-102 RF Exposure
L’antenne (ou les antennes) doit être installée de façon à maintenir à tout
instant une distance minimum de au moins 20 cm entre la source de radiation
Reorient
or
relocate
the
receiving
antenna
.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to whic
h the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
instant
une
distance
minimum
de
au
moins
20
cm
entre
la
source
de
radiation
(l’antenne) et toute personne physique.
Cet appareil ne doit pas être installé ou utilisé en conjonction avec une autre
antenne ou émetteur.
This device complies with Part 15 of the FCC Rules. Operation is subject to th
e following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interferen
ce that may cause undesired operation.
A h difi ti t l d b th t ibl
A
ny c
h
anges or mo
difi
ca
ti
ons no
t
express
l
y approve
d
b
y
th
e par
t
y respons
ibl
e for compliance could void the user's authority to operate this equipment.
RSS-GEN Section 8.4
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not ca
Operation
is
subject
to
the
following
two
conditions:
(1)
this
device
may
not
ca
use interference, and (2) this device must accept any interference, including i
nterference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables au
x appareils radio exempts de licence. L'exploitation est autorisée aux deux co
n
d
i
t
i
o
n
s
su
iv
a
n
tes
:
(
1
)
l'
appa
r
e
il n
e
do
i
t
pas
p
r
odu
ir
e
de
b
r
ou
ill
age
,
et
(
2
)
l'
ut
ili
s
11 12
dto s
su a tes
()
appa e
e
do t
pas
p odu e
de
b ou age
,et( )
ut s
ateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si l
e brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu