GROUND SP-010 Bluetooth Retro Karaoke Microphone User Manual
Shenzhen Ground Enterprises Co., Ltd Bluetooth Retro Karaoke Microphone
GROUND >
user manual
USER MANUAL
MOBILE RECORDING
With the USB charging cable connect the
USB charger into a charging port - The red light under
the power button will go on, showing it is in charging
mode.
The normal charging time is 2 hours. After a full
charge the red light will automatically turn off.
When the battery voltage is too low, the product
will automatically turn off.
SPECS
Bluetooth: V4.2
Output Power: 10mW (headset output)
3W*2 (speaker output)
Frequency Range: 20Hz-18000HZ
Reverberation Mode: Echo Sound Effect Reverberation
Power Supply Mode: Built-in Polymer Lithium Battery
Battery Capacity: 2000mAh
Charging Power: DC5V
Playing Time: Up to 3 hours
Open the Recording Application: Download a Karaoke
recording enabled APP onto your device, choose the
music you like then aim your device at the mic located
at the top of the speaker to record your song on the app.
Save your songs according to the instructions that are
on the app downloaded.
Product Overview
Microphone
Speaker
Power Switch
Mic Volume
USB Charging
Port LED
Charging
Indicator
Light
USB
PORT
Speaker Volume Up/
Next Song Speaker Volume Down/
Previous Song
Echo Strength Adjustment
Multi Function (MF) Button
Pause/Play/Answer Calls/Hang Up Calls
The power light
doesn’t work.
The battery is too
low or the charging
line is disconnected.
Charge the mic.
Examine the
connector or
charging cable
The microphone
has no voice.
The power is not turned
on or the mic volume
is not adjusted.
Turn on the power
or adjust the
mic volume.
The microphone has
no echo
reverberation.
The reverberation switch
is not adjusted well.
Adjust the
reverberation switch
to the proper
position.
Singing or recording
is accompanied
with noise.
Environment noise or
Mobile device signal
interference.
The mobile device
doesn’t match.
The mobile device sound
treatment chip has weak
performance.
Use in a quiet place.
Increase the
distance between
the mic and device.
Restart the mobile
device or change the
device completely.
Some models of
mobile devices
have bad recording
results.
The Bluetooth distance
is too far. There is
obstacle between the
mobile device and
microphone.
Put it near the
mobile device.
Keep away from the
obstacle.
When the Bluetooth
is played, there is
accompanying
sound or static.
The mobile device
volume is too low or the
source music file has
low volume.
Adjust the mobile
device media volume.
Download music
with high volume.
The Bluetooth
has low or no
accompanying
sound.
The Bluetooth
distance is too far.
There is an obstacle.
It is connected to
another mobile device.
The volume is too high.
The battery is too low.
Adjust the mobile
media volume low.
Charge the battery.
Put it near the
mobile device. Keep
away from the
obstacle. Disconnect
the connected
mobile device.
The Bluetooth
couldn’t be
connected.
Distortion occurs
when the Bluetooth
is playing music.
TROUBLESHOOTING
www.AduroProducts.com
For any questions regarding
this product please contact
CS@aduroproducts.com
Issue Reason Troubleshooting
Issue Reason Troubleshooting
WIRELESS
KARAOKE MIC
& SPEAKER
U
Note:
After connecting your device once, the Bluetooth will
have memory function. After starting up, it will connect
automatically to your device.
For disconnecting you can Forget The Device using the
Bluetooth settings on your mobile device.
Once the Karaoke Mic is connected you can now
stream audio from your mobile device.
Use The Speaker Volume Controls to adjust the sound
of the audio from your mobile device, as well as go to
next or previous songs. You can also adjust the audio
from the device itself.
Use the MF Button to Play/Pause your music
Note:
If you are only intending to listen to music, using
the speaker and not the microphone adjust the
microphone volume to the minimum.
Once connected to your mobile device you can now
control and make your calls through the Karaoke Mic.
Use the MF Button to answer and hang up your call.
To use the mic for singing make sure that the MIC
Volume is raised to the desired level. You can then
adjust the Echo strength of the mic using the Echo
Strength adjustment control.
You can now sing alone or sing along to the audio
streaming from the speaker.
CHARGING
PAIRING
USING THE MIC
USING THE SPEAKER
ANSWERING CALLS
Turn on the power switch and the blue light will go on.
When the bottom indicator light flashes blue the speaker
is in pairing mode.
Open your Bluetooth settings on your mobile device and
scan. After finding "ADURO US20",select it. The Karaoke
Mic will now connect with your device. After connecting
you will hear a prompt telling you that the Bluetooth is
connected.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.