GROWATT NEW ENERGY TECHNOLOGY SHINERFSTICK ShineRFStick User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3251257
Application ID	ziaYp7ix/WwpfI3LZoRgWg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	102.2kB (1277443 bits)
Date Submitted	2017-01-09 00:00:00
Date Available	2017-01-09 00:00:00
Creation Date	2016-11-18 15:54:25
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2016-11-18 15:54:25
Document Title	Growatt Shinelink 快速安装指导
Document Creator	CorelDRAW
Document Author:	jessica

Electrical Connection
Unpacking
Unpacking, and check the package device list:
Item
Name
Quantity
ShineLanBox
ShineRFStick
Network
Power adapter
Fixing screws
Wall plastic posts
User manual
Growatt ShineLink
Quick Installation Guideline
For more info, please download from http://server.growatt.com
+86 755 2951 5888
+86 755 2747 2131
service@ginverter.com
www.ginverter.com
2> ShineLanBox Electrical Connection
C Power on the inverter, observe the blue led in the
ShineRFStick, if the led on and then turn to flash, it
means ok, otherwise means you should check the
installation.
Blue LED status:
Solid on: device is initializing
Solid off: no device found on RS232 port
Flashing fast (change every 0.2s): Found device on
RS232 port
Flashing slow (change every 1s): network
communication normally
Item
Name
Description
Power input
Connect to the power adapter
RS 485
Reser ved
RJ 45
Connect to the network
Key
Function key
Configuration LED
Configuration the device
Device LED
Device number connected
Network LED
Connecting the network
Power LED
Connecting the power
1.Run ShinePhone, please register a new user if is the first time.
When entering SN ,Please enter the ShineLanBox SN , not the
ShineRFStick SN.
Search “ShinePhone” in google play or app store, or scan the 2.Input the user name and password to log in.
picture below, download and install the app.
Step3.
Use ShineLink
1> ShineRFStick Electrical Connection
Take the waterproof plate down from RS-232 port of
the inverter
A If the RS-232 port of the inverter likes the
specification A as below, please turn on pin 1 of the
DIP switch, then plug the Growatt ShineRFStick to
the inverter directly via the RS-232 port and lock the
screws;
B If the RS-232 port of the inverter likes the
specification B as below, please poke the rubber plug
in the waterproof cushion of the Growatt
ShineRFStick, then plug the ShineRFStick to the
inverter via the RS-232 port and lock the screws.
Connect the RJ45 interface of the ShineLanBox to the
router ,then plug in the power adapter to power on the
ShineLanBox.
After power on, the Power LED on, Network LED
flashing, then the ShineLanBox start to search the RF
device and connect to the server. Network LED on
means connect to the server ok, device LED flashing
means devices connect ok. If there are more than one
RF device, please note the device LED continuous
flashing times, it means the connected devices number.
Note:
1.Power LED : connecting the power
2.Network LED : connecting the network
3.Device LED : the number of the LED continuous
flashing means the device number connected to the
ShineLanBox
4.Configuration LED : flashing when
configuration , if successful , the LED will be off.
3.Into the device page, check the device number configured
and the status.
4.Put the device list to the detail page, check the device
parameters.
【Android& iOS】
NOTE: 1.Be sure to install the latest version of the software;
2.For more details, please refer to the content on
http://server.growatt.com .
This device complies with part 15 of the FCC Rules. Occur in a particular installation. If this equipment
Operation is subject to the following two conditions: does cause harmful interference to radio or television
Add new ShineRFStick:
reception, which can be determined by turning the
equipment
off and on, the user is encouraged to try to
(1) This device may not cause harmful interference,
Short press the button of the ShineRFStick and
correct
the
interference by one or more of the following
ShineLanBox , entering the configuration mode, if and
measures:
successful, the configuration LED of the
-Reorient or relocate the receiving antenna.
(2)
this
device
must
accept
any
interference
received,
ShineLanBox will be off ,and the blue LED of the
-Increase
the separation between the equipment and
including interference that maycause undesired
ShineRFStick will flash slowly.
receiver.
operation.
-- Connect the equipment into an outlet on a circuit
Note:
1.Pressing the button of the ShineLanBox for more NOTE: This equipment has been tested and found to different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
than 6 seconds until the four LED flash will clear the comply with the limits for a Class B digital device,
technician
for help.
configuration information .
pursuant to Part 15 of the FCC Rules. These limits are
Note: The manufacturer is not responsible for any radio
designed to provide reasonable protection against
or TV interference caused by unauthorized
2.About the distance between the ShineLanBox and harmful interference in a residential installation.
the ShineRFStick, the maximum linear distance is
This equipment generates, uses and can radiate radio modifications to this equipment.
such modifications could void the user’s authority to
200m if there is no obstructions between then; the
frequency energy and, if not installed and used in
operate
this equipment
maximum distance is 50m if there is one wall between accordance with the instructions, may cause harmful
then; the maximum distance is 20m if there are two interference to radio communications. However, there Changes or modifications not expressly approved by
the party responsible for compliance could void the
walls between then.
is no guarantee that interference will not.
user's authority to operate the equipment.
Append

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Create Date                     : 2016:11:18 15:54:25+08:00
Modify Date                     : 2016:11:18 15:54:25+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Author                          : jessica
Creator                         : CorelDRAW
Title                           : Growatt Shinelink 快速安装指导

EXIF Metadata provided by EXIF.tools