GTDevice RECEIVER Wireless Microphone Dongle User Manual modmic Wireless Manual Final

Download:
Mirror Download [FCC.gov]
Document ID	3981641
Application ID	mJ0HhOfPm5vtM0lOpTqx/A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	49.24kB (615550 bits)
Date Submitted	2018-08-28 00:00:00
Date Available	2018-08-28 00:00:00
Creation Date	2018-08-17 11:09:21
Producing Software	Adobe PDF library 15.00
Document Lastmod	2018-08-28 18:19:26
Document Title	modmic_Wireless _Manual_Final
Document Creator	Adobe Illustrator CC 22.1 (Windows)

ModMic Wireless
Surface Choice
Find a flat spot on the headphones for the 0.5” circle of adhesive. The adhesive will stick to smooth and
mesh surfaces but does not stick well to rubberized surfaces.
1. Put the headphones on to ensure the ModMic will reach the corner of your mouth from the desired
mounting point.
2. Thoroughly clean and dry the surface with the included alcohol pad.
Attaching & Orientation
1. Connect a
to the ModMic base via the magnet.
2. Remove the protective backing from the adhesive.
3. While holding the ModMic, orient the mic boom
angle down so it points towards where your mouth
will be when using your headphones. This will reduce
the need for additional bends in the boom after
installation (see figure A).
4. Press the whole mic/clasp down onto the cleaned
spot and hold firmly for 60 seconds. On mesh or
curved surfaces, allow the adhesive to cure for 1
hour.
5. For best results the ModMic Wireless is designed to
be attached to the right side of your headphones so
the charging port is facing down (see figure B).
For more information/extra clasps/questions/feedback visit www.AntlionAudio.com Designed in Portland, Oregon.
Manufactured in China. ModMic and Antlion logo are trademarks of GTDevice LLC. U.S. and International patents
www.AntlionAudio.com
Facebook: AntlionAudio
Twitter: @AntlionAudio
ModMic Wireless
SETUP
Initial Setup of your ModMic Wireless
1. Connect the USB extension to a USB port and attach the USB receiver. Place the receiver in clear line of sight
to your ModMic, ideally away from other wireless devices.
2. Power on the the ModMic Wireless by quickly pressing the button located on the ModMic Wireless Base .
The blue light will be solid. Your ModMic Wireless comes paired with your receiver out of the box.
3. Ensure the ModMic is unmuted (no red lights should be on).
4. Select the USB receiver as the default device in your microphone settings. Your ModMic Wireless is now
ready to use!
Charging
1. Insert the USB charging cable into any USB 2.0 or higher port.
2. Plug the USB cable into the ModMic Wireless’ micro USB port. A yellow indicator light should be blinking
slowly to indicate charging. A solid yellow light indicates full charge.
Mute and Power Off
1. To mute the ModMic while in use simply tap the power button. A red indicator light will appear on both
your ModMic and your Wireless Receiver.
2. To turn off the ModMic hold the power button for 2 seconds. When powered off and unplugged all
indicator lights will be off.
ModMic Wireless
FAQ
Does the ModMic Wireless or Receiver install any software or require any drivers?
No, the ModMic Wireless works with default system drivers and has no required software.
What if my device doesn't have the right size USB Port?
Certain devices no longer have a USB type-A port, however, most will operate properly if you purchase a converter
to the appropriate size.
What if I can't get the device to work?
Contact us at CustomerService@Antlionaudio.com or drop by our Discord for live help.
What bitrate settings should I use?
The ModMic uses 16-bit 48khz for recording in both modes.
Can I use my ModMic Wireless with other Bluetooth devices?
The ModMic Wireless will only work when paired with the Antlion USB Receiver.
As a result, it will not work with native Bluetooth devices like phones, speakers, cars, etc. unless those devices
use a USB and compatible operating system (Windows, Mac, Linux).
To which side of the headphones should I attach the ModMic Wireless?
The ModMic Wireless can attach to either side of the headphones, however, we recommend attaching the ModMic
to the right side of the headphones with the micro-USB port facing down to make it easier to charge while in use.
ModMic Wireless
Getting the most from your ModMic Wireless
1. The mic is sensitive to plosive blast/wind
from your mouth, especially P’s (see figure C).
For best results position the mic completely
out of your breath stream and 1-2 inches
from your face.
Troubleshooting
Uni-directional
2. Ensure the mic switch on the boom is
pointed towards your mouth (see figure D).
Omni-directional
(selected)
Do you need a little more help?
Here are some common troubleshooting steps that may help you out.
1. Ensure the ModMic Wireless mute is disabled. The red light should be off, if on, press the button once to
disable mute.
2. Make sure you have the ModMic Wireless selected as your default communication device in your recording
devices options.
3. If you're having quality or connection issues, try different USB ports on your your computer/device.
4. Use the USB extension cable to place the USB receiver in your line of sight.
5. If you need additional help contact us at CustomerService@AntlionAudio.com.
Parts List
One ModMic Wireless
microphone
Two base clasps,
& two 3M adhesives
One foam
pop filter
Antlion USB
reciever
Alcohol wipe
1 USB extension
& 1 Micro USB cable
Carrying case &
Instruction manual
ModMic Wireless
LED Diagram
Button
(Power/Mute)
Red LED
(Mute)
Yellow LED
(Charging/Battery)
Blue LED
(Power/Pairing)
State
Power On/Connected
Power Off
Muted
Unmuted
Charging
Fully Charged
Battery Low
Pairing (Mic & Dongle)
Connecting
Red (Mute)
Off
LEDs and Pairing
How to Pair your ModMic Wireless
1. Connect the USB Receiver either directly of via
the USB extension cable (preferred).
2. Power on the the ModMic Wireless by briefly
pressing the power button.
3. If paired, the blue light on both will be solid.
4. If the blue light on either the receiver or the
ModMic is blinking slowly it means the device
is not detecting its paired counterpart.
5. To pair the devices, press and hold the buttons
for 5 seconds on both the ModMic and the
Antlion USB Receiver. The blue light will begin
blinking quickly on both devices.
6. Both devices should then blink slowly and
change to solid blue to indicate a connection.
The devices are now paired.
Blue (pairing on/off)
Solid
Off
Amber (battery/charge)
Solid
Off
Breathing
Solid
Blinking
Off
Fast Blinking
Slow Blinking
indicates that the associated LED could either be ON or OFF, depending on its status.
ModMic Wireless
FCC
Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by Antlion Audio might cause harmful interference and void the FCC authorization to operate
this product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an output on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This product complies with FCC OET Bulletin 65 & Industry Canada’s RSS-102 radiation exposure limits set forth for an uncontrolled environment
Ce produit est conforme à la norme FCC OET Bulletin 65 et aux limites d'exposition au rayonnement RSS-102 d'Industrie Canada définies pour un environnement non
contrôlé.
This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Cet appareil est conforme à des règlements Innovation, Sciences et Développement économique Canada exempts de licence standard RSS (s). Son fonctionnement
est soumis aux deux conditions suivantes: (1) Ce dispositif ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y
compris les interférences pouvant entraîner un fonctionnement indésirable.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada.
ModMic Wireless
Warranty
Battery Legal
1. When charging, please put this product on a dried or ventilated area and keep it far away from heat sources
or explosive products.
2. Do not charge the battery if ModMic Wireless is hot to the touch. Otherwise it may damage the battery and
could be a fire hazard.
3. Please make sure that you use the original USB charging cable provided. If the battery appears swollen or
gets hot during charging please stop charging and contact CustomerService@AntlionAudio.com.
4. A battery when not in use for a long time will lose its charge automatically. Charging or discharging too
often may reduce the life of the battery.
Warranty
FROM DATE OF PURCHASE, OUR ONE (1) YEAR LIMITED WARRANTY COVERS MANUFACTURING DEFECTS OF THE MODMIC AND/OR ITS ACCESSORIES.
If you experience a product defect and are within the return period of the reseller from which you purchased, please return the item to the retailer.
If you are outside their return window but within our warranty window of 1 year (or the minimum warranty required by your country from date of
purchase), we will repair or replace your ModMic for any manufacturing defects in the ModMic and/or its accessories at our discretion.
Our Warranty does not cover/is voided by the following:
1. Damage caused by accident, abuse, neglect, or misuse.
2. If you cannot supply a valid dated proof of purchase.
3. If the ModMic or USB Reciever has been disassembled.
Before returning your ModMic for repair or replacement please contact us first at CustomerService@AntlionAudio.com for further assistance!
After Warranty repair or replacement, your Warranty will remain in effect until either one (1) year after your original purchase date, or ninety (90)
days after repair or replacement, whichever is longer.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:08:17 11:09:21-07:00
Creator                         : Adobe Illustrator CC 22.1 (Windows)
Modify Date                     : 2018:08:28 18:19:26-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : Adobe Illustrator CC 22.1 (Windows)
Metadata Date                   : 2018:08:28 18:19:26-07:00
Thumbnail Width                 : 256
Thumbnail Height                : 172
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 8802 bytes, use -b option to extract)
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : True
Max Page Size W                 : 8.500000
Max Page Size H                 : 5.997685
Max Page Size Unit              : Inches
Font Name                       : Geogrotesque-SemiBold, TradeGothicLTStd, TradeGothicLTStd-BdCn20
Font Family                     : Geogrotesque, Trade Gothic LT Std, Trade Gothic LT Std
Font Face                       : SemiBold, Regular, Bold Condensed No. 20
Font Type                       : Open Type, Open Type, Open Type
Font Version                    : Version 2.003, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.001;Core 1.0.33;makeotf.lib1.4.1585
Font Composite                  : False, False, False
Font File Name                  : Geogtq-Sb.otf, TradeGothicLTStd_0.otf, TradeGothicLTStd-BdCn20.otf
Plate Names                     : Black
Swatch Group Name               : Default Swatch Group
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : Black
Swatch Colorant Type            : PROCESS
Swatch Colorant Tint            : 100.000000
Swatch Colorant Mode            : CMYK
Swatch Colorant Cyan            : 0.000000
Swatch Colorant Magenta         : 0.000000
Swatch Colorant Yellow          : 0.000000
Swatch Colorant Black           : 100.000000
Format                          : application/pdf
Title                           : modmic_Wireless _Manual_Final
Rendition Class                 : proof:pdf
Document ID                     : xmp.did:2920a037-f21a-2248-9a05-b04ecc8825e0
Instance ID                     : uuid:ba54db7a-fb21-488f-a6dd-2540fbbe8477
Original Document ID            : uuid:7fda3abb-8cb7-ce40-817c-27e192c836d4
Derived From Instance ID        : xmp.iid:ac3d176a-b59c-6e44-85fd-f15db4d2b025
Derived From Document ID        : xmp.did:ac3d176a-b59c-6e44-85fd-f15db4d2b025
Derived From Original Document ID: uuid:7fda3abb-8cb7-ce40-817c-27e192c836d4
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:065c9f88-a87e-4a94-a5f5-20d8f8462065, xmp.iid:2920a037-f21a-2248-9a05-b04ecc8825e0
History When                    : 2016:09:15 15:13:45-07:00, 2018:08:17 11:09:21-07:00
History Software Agent          : Adobe Illustrator CC 2015 (Macintosh), Adobe Illustrator CC 22.1 (Windows)
History Changed                 : /, /
Producer                        : Adobe PDF library 15.00
Page Count                      : 7
For                             : Administrator,
Bounding Box                    : -2089 -1619 1758 973
Container Version               : 11
Creator Version                 : 22

EXIF Metadata provided by EXIF.tools