GUANGZHOU BOSMA TECHNOLOGY WS008 Cloud Smart Scale User Manual
GUANGZHOU BOSMA TECHNOLOGY CO.,LTD Cloud Smart Scale
User Manual
After setting up your pereference, the
app will come to the bluetooth connection
guide page.
“ Auto-connection”:
The app will automatically search and
connect the Bosma Smart Scale nearby.
“ Manual-connection”:
Enter the bluetooth device search page,
the smart scale can be found and please
do the connection manually.
Step 1 App Installation
1
2
3
When taking measurement, please stand on the scale at ease with clean
bare feet, distribute weight evenly on both feet, and wear light clothes.
Please see the picture below for foot positions.
Place the Smart Scale on solid ground services such as hardwood floor
or marble floor (not on soft surfaces such as carpet) and turn on the
power first. Please turn the power off if the scale is not to be used for a
long period of time.
• Right after a heavy meal
• Right after intensive exercise
• Right after a hot bath, shower, or sauna
• Right after drinking large amount of liquid such as water or alcohol drink
• Feeling illness
For best result, please take the measurement with the Smart Scale at the
following times:
• After waking up in the morning
• Before bedtime in the evening
• One hour after each meal
The built-in lithium-ion battery for your Smart Scale can only be charged
when the power is switched on.
Bosma Cloud Smart Scale applies bioelectrical impedance analysis method
to estimate body composition. In order to maintain consistent measurement,
comparability, and accuracy, we recommend that users take the
measurement at approximately the same time of the day and under the
similar conditions. In addition, please avoid the following situations when
taking the measurement :
6
Use Power Switch
Pick to Turn On/Off Power Power Switch Pick
Step 3 Switch on the power on the Smart Scale and turn on the
bluetooth on the mobile device (such as smartphone or pad).
After entering the smart scale app, please fill in your information as Height,
age and etc.so that the 8 test datas and the comprehensive evaluation
result are more acurate. The smart scale also supports the design of caring
for children and pregnant women, and gives more targeted recommendations.
Step 2 Set Up Your Preference
How To Use It
2
Step 4 Device Connection
4
31
Product Introduction
Power Switch
and Power Port
Cloud Smart Scale
USER GUIDE
WS008A
WS008B
WS008C
WS009D
Notice to Operation
Scan the following QR code to download the smart scale app of Android or
iOS. (System required: Android 4.3 and above, iOS 7.0 and above,Bluetooth
4.0 and above)
Electrodes Electrodes
Battery level indicator
Weight Indicator
Bluetooth Status
Indicator
Step 5 8 Data Analysis, 30 Day Trend
When your smartphone find the SmartScale, Please stand on the scale with
bare feet, and wait for the weight value staying on after flashing for three times.
After the measurement is completed, the analysis of the indicators and health
recommendatios can be seen on the APP.
4
After successful bluetooth connection,
the app will automatically connect to the
scale next time when the user opens the
app. The user can also do the scale
connection at the sidebar Connection.
IOS Android
5
WARNING
SUPPORT
Please do not use the Smart Scale if you have one or more of the following
conditions:
• Using a pacemaker
• Having an artificial heart to support life
• Wearing an Electrocardiograph device
People with the following conditions may not have accurate measurement of
body composition because of change of proportion of body liquid such as water
and deviation from average values (physicians’ advice recommended):
• Young children
• People with medical conditions
• Pregnant women
Bosma offers a one year limited warranty on all products, for details please visit
www.bosmausa.com.
Contact the Bosma customer support team if you have any questions about your
Bosma Cloud Smart Scale.
support@bosmausa.com / www.bosmausa.com / 1-800-976-0881
Caution: The user is cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.