GUANGZHOU TAIMA TS4500H Wireless Barcode Scanner User Manual TS4500 x

Download:
Mirror Download [FCC.gov]
Document ID	2621384
Application ID	XLgBGXFk8C0/JcoyHfSWVA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.28kB (415956 bits)
Date Submitted	2015-05-21 00:00:00
Date Available	2015-05-21 00:00:00
Creation Date	2015-05-20 17:30:11
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-05-20 17:30:11
Document Title	Microsoft Word - TS4500 User manual.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

VER: TS45_QG_EN_V1.1.0
Wireless Barcode Scanner
Scanner & Cradle
②．Channel Increase
⑦．Power interface
③．Channel Decrease
⑧．Data interface to connect PC
④．Power Indicator
⑨．Adjust button
⑤．Data Indicator
⑩．Antenna
Installation
Quick Reference Guide
Step1. Refer to the below pictures, connect the cradle to host (e.g.
PC) with different cables firstly, and then connect the adaptor to the
power socket.
USB: USB cable RJ45 connect cradle ⑧, the other side connect PC.
①Power Indicator
③Trigger
②Data Indicator
④Exit Window
USB cable
P/S 2: P/S2 cable RJ45 connect cradle ⑧, the other side to connect
PC and P/S2 port keyboard
Set Defaults
FCC-ID: 2AET8TS4500H
①．Pairing
⑥．Reserve
RS232
When the scanner is out of communication area of the cradle, the
scanner will save the barcode data in built-in data memory. The
Step 2. Put the scanner onto the cradle like below picture.
scanner will send the data to the cradle automatically when the scanner
gets back to the communication area.
The scanner data indicator will become red. After finish sending data,
the indicator will to be green.
More Than One Cradle Work In The Same Space
When there are more than one cradles working in the same space, it
is better to set every cradle work in different channel. Channel is set
P/S2 keyboard cable
RS232：RS232
cable
RJ45
side
to
as follows:
1. Open a notepad or other text editor.
connect ⑧ ,the other
Place the Scanner
side to connect PC.
Step3. Press cradle middle button①（P）for about 4 seconds, until
the Scanner issued a "beep beep" sound.
2. Press the cradle Channel increase or decrease button.
3. Pairing the scanner and cradle.
Note： After changing the channel of a cradle pairing is need.
Note: A cradle is able to work with as more as 100 scanners at the When more than one cradle work in the same channel, it will reduce the
same time. After a Scanner pairing with Cradle, the cradle can bar code data transmission speed, but no any other problems.
receive the data from the scanner.
Usage of Scanner
Power Up/Power Down
Scanner will be power up when the trigger is clicked. When the
Indicator & Button
scanner is not operated for 30s, it will enter power down modeScanner Indicator
RS232 cable
Typically, cradle is able to identify the data port type automatically. automatically
Status
Left
Light
In extreme cases cradle port may need setting manually if the host
Charging
Scan Success
Bright Red 1sec
Bright Red 1sec
fails to identify it.
Position the scanner onto the cradle.
Power on
Green
Note: Pairing before set interface type.
Note：The scanner power indicator becomes green and keeps
Low Power
Green flashing
Charging
Red flashing
Finish charge
Yellow
Automatic Identification (Default)
USB
PS/2
flashing when the scanner is low power.
Built-in Data Memory
No data stored in
Green
Start transfer Bar Code Data (for Manual Transmission Mode)
Scanner
Data
stored
Red
In
Information inquire
Fire Ware Version
Scanner
Clear the Barcode Data in Scanner
Scanner Serial No Check
Red Flashing
Data memory full
Cradle Serial No
Cradle Indicator
Battery inquire
Light
Meaning
Right （Green）
Flashing: identifying interface
Insert the scanner ID before barcode in order to identify the barcode
Channel &scanner ID
is scan by which scanner when there are more than one scanner
On: interface if identified
Middle （Red）
Flashing: Receiving barcode data
On: Data is sending to PC
Left （Green)
Insert The Scanner ID before Barcode
communicate with the same cradle.
Suffix Quick Setup
Insert ID before Barcode
CR（default）
LF
Reserve
Do not insert ID before Barcode
（default）
CR+LF
Cradle Button
Button
None
Position
Function
RF Transfer Mode
（mark）
Channel
Right
Decrease
Button (-)
Set channel decrease
No-store Mode: The scanner transmits every scanned barcode to
cradle. If transmitted unsuccessfully (e.g. beyond communication
distance or cradle does not connect PC), the barcode data will be
Channel
Middle (P)
increase
Channel
Left
increase
Button (+)
Press for 4second to pair a
ignored and the issued a “beep beep beep” sound.
scanner with a cradle.
Auto-store Mode: The scanner starts storing barcode data when it
Set channel increase
Code name transmission
Transmit
Do Not Transmit
（Default）
Volume of beeper
High（Default）
Middle
loses its connection to a cradle (e.g. a user holding the scanner walks
out of range).Data transmission is triggered by reestablishing the
Low
Mute
connection with cradle.(like when a user holding the scanner walks
back into range)
Common Settings
Manual Transmission mode: Data transmission is triggered by
Set Defaults
scanning”Start transfer Bar code data”
Set Defaults
Do not Transmit Prefix (Default)
Auto-Store Mode (Default)
NO-Store Mode
Manual Transmission Mode
Prefix
Transmit Prefix
Scan Prefix(0~16 Chars, 2Digits/Char; 00~FF; 00*）
Suffix
Suffix（Default）
Do Not Transmit
Suffix
Scan Suffix (0~22 chars, 2 Digits/Char; 00~FF; 0D*)
Parameter bar code
Finish Setting
FCC Statement
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If
this
equipment
does
cause
harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions (1)this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2015:05:20 17:30:11+08:00
Modify Date                     : 2015:05:20 17:30:11+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - TS4500 User manual.docx
Creator                         : Administrator
Document ID                     : uuid:98f7ce88-9979-4c6d-8396-e2dc42bfb179
Instance ID                     : uuid:478d835d-0ce8-47f1-9904-8214b8f22933
Page Count                      : 5

EXIF Metadata provided by EXIF.tools