8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 44220 |
| Application ID | 9aWfmR5sr4CixEs712fWhA== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 20.58kB (257305 bits) |
| Date Submitted | 1999-06-25 00:00:00 |
| Date Available | 1998-06-11 00:00:00 |
| Creation Date | 2001-06-18 04:39:57 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-06-18 04:40:07 |
| Document Title | 44220.pdf |
| Document Author: | VicodinES /CB /TNN |
I 22 98 17115
CANON
L1) Packard Bell.
2 I 60
Color M‘Gmtor
Fa ID'DHZIM’
[21001
"I 22 9“ 17:17 CANON M003
J l
@ “lg:
l Customer’s Record , ' ‘l
The serial number oi this product appears on the back of the unit.
You should note this serial number in the space provided below and retain
this manual as a permanent remrd of your purchase to aid in identification
m the event of thett or loss.
Model number, 2160
Serial number
To reduce the risk of tire or eledric shook, do not upose this
computer display to min or moisture
Caution
For i20V operation, use only with a Power cord piu having a railei
bladed grounding type plug, rated 125 10A. g pa
l—Federai Comrrnmications Commission Requirements
ii [16:1 e
This equipment has been tested and found to Comply with the limits
for a Class B digital device, pursuant to Part 15 or the FCC Rules
These limits are designed to provide reasonable protefilon against
harmful interference in a residential installation
This equipment generates. uses and can radiate radio frequency energy
and. it not installed and used in accordance with the instructions, may
cause narmtul interference to radio wmmunications. However, there is
no guarantee that interference will not occur In a particular rnslallationr
it this equipment does cause harmful Interference to radio or television
reception. which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more or the following measures:
Reortent or relocate the receiving antenna.
increase the separation between the equipment and the receiver.
~ Connect the equipment into an outlet on a cirouit different from that
to which the receiver Is connected.
- Consult the dealer or an experienoed radio/TV technician for help.
It necessary. consult your dealer‘s service representative for additional
suggestions. The user may find the booklet, “How To identify and
Resolve Radio/TV interference Problems", repored by the Federal
Communications Commission, helpful, this ookiet Is available from
_.1_
*—' I mflleMMmipfi twenties-unfit I fi
04 ZZ’SW 17:17 CANON @lll)4
-j e} MIL
the U.S. Guvemment Priming Office Washington DC, 20402. Stock
Nn_ om-uannoa454.
Caution: Changes or modifications not expressly approved by the
manufacturer for compliance could void the users (or your) authority
to operate the equipment. Only peripherals (digital in ut/output devices,
etc) certified to comply with the Class 5 limits may 9 attached to this
monitar. Operation with non»certltled peripherals is likely in result ln
interference to radio and TV reception,
Only shielded prrwer and signal cables may he used with your system.
The use at a nun-shielded inlertaoa cable is prohibited.
The manufacturer Is not responsible fur any radio or TV Interterenoe
caused by unauthorized modification to this equipment.
Canadian department of Communications Requirements
This Class B digital apparatus meets all mquirements of the Canadian
lnterterenoe Causing Equipment Regulations.
Cel apparel] numerique de la class B respects toutes les exigencas du
Raglament sur le matériel bmullleur du Canada.
Copyright
4? Copyn‘ hl 1997 Peekard Bell NEG, inc. All rights reserved. No part at
this pu “nation may be reproduced, transmitted. transcribed, stored In a
retrieval system or translated lntu any language or wmputer language,
in any term or by any means (electronic, mechanical, magnetic, optic-I,
chemicalbrrhanual. or otherwise) without the prior written permission of
Packard e .
Disclaimer
The information in this door-mam is subject to change without notice.
Packard Bell makes no representations or wananlies with respect to the
contents hereot. and specifically disclaims any implied warranties of
merchantabillt or fitness tor any particular muse. Further, Packard
Beii reserves its right to revise thls publicalan. and to make changes
from time to time in the content hereof, without obligation uf Packard
Bell to notify any persun at such revision ar changes.
Trademarks
Product names used in this manual are the properties of their respective
owners.
PACKARD BELL Is a registered trademark of Packard Bell NEClnc,
in the U.S.A.and is also pending or reglstered In other countries
throughout the world.
_2_
”1 1 mzimumarr-w-lpss 2 $ regularmnew [ I—
(ii/22 98
17:
110
CANON
r. Introduction m]
congratulations on purchasing a Packard Bell 2160 monitor, One of the
most versatile monitors available today, the 2160 monitor automatically
adjusts its vertical and horizontal scanning frequencies to those of your
computer‘s graphic displays, when used with SUPER VGA compatible
graphim adapters and video chip sets (see Specifications).
I“
II. Safety Precautions
To prevent electric shock do not remove screws or cover. There are
no user-serviceable parts infide the monitor. Service should be done
only by a qualified service poison,
. Input power source:
In the United States and Canada, most Ac wall outlets are 120V in a
range 1mm 100 to 125V
The 2160 monitor with a universal power so pl can work from AC
100 to 120V. P y
The monitor is equipped with e three-pronged grounding plug. which
will only fit a grounded power outlet.
This is a safety feature. If you are unebis to Insert the plug into the
outlet, contact an electrician. Your outlet may be obsolete.
. Do not put anything on the cord. A Dam ed power card may cause
fire or electric shock. If your power con! 5 damaged, do not use it.
Cont-ct Pemard Bell customer Service for inforrnltion on obtaining
a replacement.
Keep children and pets away from the monitors Alsov do not insert
objects into the monitor's cabinets. They may touch dangerous
voltage points, which can be harmful or fetal‘ or cause electric shout,
tire or equipment feliurev
Do not allow liquids to get into the cabinet.
. To reduce eye fatigue, avoid using the display in direct sunlight or
under bright lights.
, Do not operate the monitor beyond the specified temperature and
humidity range (see specifications).
j I VE'Jtl’IVeersM-rullefis s “sermon/r we
54'wa «(o “H:
l i—
[Anus
at, 22 98
17.
19
CANON
For proper operation, keep the monitor adequately ventilated.
Keep the monitor away from wring magnetic fields produced try
transformers, motors. fans, or other flavices.
If the monitor does not operate properly, turn the power Off and
unplug the monitor,
When irregular AC Voltage is supplied, a protective olrouit will turn
oil the monitor (the power indicator will also go off). If this happens,
turn ol'l‘ the p0wer switch and wait at least 30 seconds before turning
it on again.
IlI. Features
. The 2160 monflor automatically adapts to the vertical and horizontal
trequencr‘es 0! VGA, SVGA, MNIA and compatible graphics adapters.
The monitors design allows you to use it with a variety of graphics
adapters and supporfi DDCtlZB.
The monitor features maximum resolutions of 1024 pixels nrtzontal)
and 768 lines (veninl) in non-interlaced or Interlaced mo es.
This monitor awems analog signal Inputs and ean display up to
282,144 colors, depending upon the type of graphics board and
software used,
Power Management systems:
When used with a Packard Bell Pc that features a power
management system, the monitor's power consumption will
automatimlly be reduced by the PC when the computer has not
been used for a period of time This monitor has a three level power-
saving feature indicated by the changing color of the power LED on
the front panel. When the power saving feature is Initiated, the LED
will change trom green to amber and the monitor's power
consumption will he reduced from approximately 50 watts to less
than 15 or 3 watts. There will be no Image on the monitor when
power management is working. To display the image again, move
he mouse or press a key on the keyboard. It may take up to 10
seconds tor the Image to reappear, This power-saving feature
exceeds the Environmental Protection Agency (EPA) Energy Star
requirements for Display Power Management Signals.
'"“ | mermaid-rupee A g rest/Mlmunr
mono
17'19
u; 22428
CANON
we “JL
Fl Speaker Attachments:
On each side vi the 2160 monitor are sockets that accept special
Packam Bell Multimedia speakers. Attaching Packard Bell special
speakers to the monitor provides an attractive and convenient way to
house your spedreis, After attaching the special Packard Bail speakers
in the monitor, connect the plugend of the audio input wire to the
somd card at the back of the main CPU box For the best appearance,
the wires can be hidden by placing them into the grooves located
under the monitor and directing them tn the back at the CPU far
conneuliun to the sound card. Full instructions for mounting the
speakers can be found with the speakers,
L._
N. Specifications
Powersourue: Ac 100~120v. EOHz
Powerconsumptinn: saw
LED Color 1 States i Power Consumption
Green ‘ On i Normal
DantAmber i Stem! hy/sispend i <=15 watts
DarkAmber ‘ Oii' <=B watts
Picture Tube:
Maximun Resoluiiun
" Horizontal:
* Vertical:
input Signals
' Video:
" Separate Sync:
Synchronization
‘ Horizontal:
' vertical:
Display Calms
"Analog Input:
Active Dimlayarea
' Horizontal:
' Vertical:
Plug & Play.
“I I renaming/i Mmi ”5
Viewabielmsge Size:
15" (diagonal), Giare, 90 deflectiun,
0.28 mm dot pitch, @
13.5'diagonal
1024 pixels (Noninlerlecvd)
758 lines (Noninteriaued)
Analog 0.7 Vep/ 75 ohm Positive
TTLLwei
Horizontal
Vettiml
Positive/Negatwe
MIN/Negative
30-54 KHz continuuus
50Hzto QDHZ continuous
infinite calors(292.144 wiurrange)
10.2" (260 mm typical]
7,57" (185 mm typical)
DDCi/ZB
A5_
e trauma min-m
@nr17
m 22 98 17 20 CANON Inns
Environmental Commons
‘OperatingTemperstura: ¢5°c ~ 435°C
“Operating Humidity: 1096 ~ 5096 (nonmndendng)
" Storage Temperature: -20“C ~ +65'c
‘ Siorage Humidity: 5% ~ sass
High Voltage: 25 KV
[fin-ansion (WxHxD): 20.7“ (525mm) x 17.7‘I (450mm) x
18.1"(lflumm)
Weight (N81): 32.1 lbs (14.5 Kg)
Till and Swivsl Operation:
swivel movement has a range M135 right or left of the neuter poshlon,
Trlt movements are limited m a Ies of -5 forward and +15 backward.
These ranges allow you to set! e screen to the vlewing posiflon mus!
comfnrtable for you.
"'"[ I rnnmwrgmnmlpfi a men/10 mum I [—
n; 22,911
,M
(g.
"7 4
‘ 21) CANON
JQ-Z-HHZ
I V. Control Locations and Functions
Note: The LEDS indicate (he comm] ilem whose description |s lound
On the following page.
From View
Contrast Volume numml ' ' ‘ Q
Rear VIEW
mama mar; man-1pm Y 5 manna 94 04,4: I h
[aims
' I1
Ul'22'98 17:21 CANJN lam
I$miL
Non-Digital Controls
, ~ Contrast adjusts the diSpIay's contrast.
- Brightness adjusts the brightness or the screen.
~ Power Switch turns the power ON or OFF.
- Power Indicator lights when the power is ON.
Digital Control Area
1. Digital Control icons:
$1 Horizontal Posltlon 8 Horizontal Width
E Vertical Position CE Veniml Height
El Pinwshlon D Trapezold
( 2. Digital Control Indicator. @
when one or the six digital controls is selected, the LED abuvs that
control lcvn is lit
3. Select Bumm:
Push this button to select which control to change.
4A 4/- Buttons:
By pressing the UP or DOWN button, you can change th! settings
tor each at the digital control itemsL 7 7 7 7 7 , , r H .., ..
‘ 5. + . Buttons ram" Puma)?
To return to one at the factory settings, press the 4‘ and - buttons
srmultaneouslyr
”T F'Eflm‘hels MW“! m a a 1mm, m ring I [7
”+22 QB 17'22
CANON
A.
in
H roziyxmv'zumnrms 9 §
VI. Connections |
Your monitor has two connection cables.
1. A Power Cord, which connects directly lo a grounded AC outlel
or to a surge proleclur that is connected to a grounded AC outlet
2. A signal Cable, which connects to your compuler's graphim
adapter (VGA connector).
To ensure your safety when connecting the cables, always follow
these four steps:
1. Make sure that the power switches on your computer and monnor
are OFF. Also, make sure the power nerds from both devices
are unplugged.
2. Carefully connect the signal treble from (he moni|ur lo your
oompuler's graphlts adapter (VGA Connector) The signal cable's
connector ls shaped so that it must be pro erly aligned with the
computer’s graphlts adapter (VGA Conne or).
3. Secure me comedian by tightening the two screws on the signal
cable connector.
4. Plug lhe power cord from the computer and monitor into a
grounded AC outlet or a surge Dmteclor lhsl is connected to a
grounded AC oullet.
1m-e,muu
jot-Inn:
@n11
IN 22 99 17'22 CANON
I“ I. @ “IE
l— vu. Pln Assignments and Signal Levels
The pin assignments of the video signal cable are shown below:
Connemar infermatlon is as follows:
SIGNAL
Red Si { al
Green 5 9|
Blue SI - nalh
R-Gmund
Pin Layout a.
Pin Assignment
SIGNAL LEVEL _
Hor. & Vert. Sync Signal levels are Tl'L. ”a ' means 0 7 Vp-p (Video) ‘Q
L vm. nming charts |
PRESET TIMING
Mods 1
Hon. Dots 720
Vert. Lines 1. 400
Hvrl m1. 3! ,47
(KHz)
H firm. has
Pnlaviy
vm, Freq.
(HZ)
vv Sync.
mm):
4] ’ v1flmlhnlm=mutpv5 In i 1mm7,wovu ‘ I'—
W112
04 22 M 17.23 CANUN
IX. Troubleshooting
1:
Before you call a Pack-1rd Bell Authorized Servicu Provider, please
check the following items:
if a nonaPC typo personal compiler or mhlcs adoptor is being
used, make sure the pin assignments of its signal lnuut conmctor
and the tignal timing meet the specifications indicated in the fitting
charts section.
PROBLEM CHECKS & ADJUSTS LOCATlON
No Piaure or ‘ Ac Cont plugged in Rear
Power indicator off. ' Power Meir on Front
No Picture. " Contrast Comm! Front
Power Indicator our ’ Brightness Control Front
" Power Management Enabled
' check signal Cable Connector Rear
,_t if" Wibfiqi ‘7 M‘— V"—
: Image is not centered. ' v. Position Control, Front
HA Position Control
image Distortion ’ Adjust Pinwshlcn & Trapezoid Front
Control
59" TES! When the signal cable is dlsoom Front
neded from the PC system, a
wuss hatch pattern will display
an the screen. The nature will
help diagnose whether the prob-
lem is coming from the monitor
or from the PC system
__11...
—| I rum um; Mmuli pas M ’ mums, PM nzva
“Q MJL
um”
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:06:18 04:39:57 Producer : Acrobat Distiller 4.0 for Windows Author : VicodinES /CB /TNN Title : 44220.pdf Modify Date : 2001:06:18 04:40:07-04:00 Page Count : 12EXIF Metadata provided by EXIF.tools