GYENNO Technologies GO-001W GYENNO One User Manual

GYENNO Technologies CO., LTD. GYENNO One

Manual

User Manual for GYENNO One Activation 1. Please take out the smartband, charge docking station, USB Charge cable(only for charge use) from package. 2. Connect USB charge cable with charge docking station and plugged into PC or power adapter USB. Note: The output interface should be 5V500mA. 3. Put smartband onto the charge docking station, with “one” logo coming out, the device will be activated successfully. Connect your phone 1. Click “one” app on your phone, then the registration screen will be popped out. 2 Input information according to requirements, then the successful registration will be popped out. 3 Enter the appropriate parameters and save them according to the conditions of yourself. 4 The device should be ready to use. Telephone, messaging, calendar, mail, alarm will be feedback to the smartband. Charge: 1. Place the smartband on the energized charge docking station, then “one” logo will be popped out and current charge level will display on the screen(The power is full if there is no charge level display) 2.The charge level sign will be off when power is full. Remove the smartband and continuously click the screen, it will show current charge level. 
FCCNoticeFCCStatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment. 

Navigation menu