Gaggia New Baby Service Manual 06 User

User Manual: Gaggia New Baby Service Manual

Open the PDF directly: View PDF .
Page Count: 5

NEW BABY

06

Features:

• Size: cm. 24,5 (l) x40 (h) x 26,5 (d)

• Power supply: 230-240V/50Hz 1300W

or 120V/60H 1425W

• Colours: ivory, black

• Weight: 6 kg

• 15 bar pump pressure

• Rechargeable water tank : 1,6l

• 1-cup and/or pod and 2-cup filter

• Group and filter holder:

chromed brass

• Pannarello frother

• Electronic control panel

soft-touch

• Solenoid Valve

• Bodywork: ABS

Italian design, made of quality

and attention to details, will

become protagonist of your daily

Espresso. Traditional but always

up-to-date, here BABY comes in

2 new trendy colours: black and

ivory. Its modern character is

underscored by an exclusive

polished metal front panel.

DIRECTIONS

Disassembling the upper bodywork:

• Loosen the screw underneath the steam knob (see red arrow)

• Loosen the two screws underneath the water reservoir (see yellow arrows)

• Loosen the two screws on the components plate (filter-holder attachment) –

see blue arrows

Steam valve:

Boiler:

• Standard

Switches assembly:

• To remove the switches assembly from the bodywork, use a small screw-

driver to lever the corners of the plastic keyboard support.

•

The steam valve assembly with cam is fastened by two screws

supporting the steam valve (see yellow marking)

• The steam valve pipe is in reinforced silicon, fastened by two

screws to the components plate (see white arrow)

Components plate:

• Remove the components plate by loosening the four screws behind the

boiler.

• The pump, the power cord connection and the ON-OFF switch are located

underneath the plate.

Lower bodywork:

Remove the lower bodywork by loosening the four screws under the lower

plate assembly.