Gallagher Group G0260X TWR-1 WeighScale and Reader, TWR-5 WeighScale and Reader User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	3986510
Application ID	C94z2m2YmWThC5SlPswscw==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	183.17kB (2289600 bits)
Date Submitted	2018-08-31 00:00:00
Date Available	2018-09-04 00:00:00
Creation Date	2018-08-09 13:58:47
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-08-09 13:58:52
Document Title	Users Manual 2
Document Creator	Adobe InDesign CC 13.0 (Windows)

TWR-1
QUICK START GUIDE
Thank you for purchasing the Gallagher TWR-1 Weigh Scale unit. The Gallagher
range of weighing systems is simple, tough, innovative and reliable.
English
Gallagher TWR-1 Weigh Scale Quick Start Guide
BONUS OFFER
Register your product online at www.gallagherams.com to extend your
warranty to two years for free.
Follow these instructions for the setup and first use of the TWR-1.
Further information can be obtained by tapping
when displayed on screen.
Contents
Box contents................................................................ 1
Charging the battery.................................................... 2
Understanding the TWR-1 Weighing Unit.................... 3
Installation................................................................... 4
Connecting equipment to the TWR-1 .......................... 6
Specifications............................................................... 6
First time start-up........................................................ 7
Start a session.............................................................. 8
View animal information........................................... 10
Care and maintenance............................................... 11
Connecting the TWR-1 to a computer........................ 11
Approvals and standards............................................ 12
BOX CONTENTS
The Gallagher TWR-1 box contains:
• Carry Bag
• TWR-1 weighing unit
• 110V - 230V Mains AC adapter
• USB cable
• USB flash drive
• 12V battery cable with alligator clips
• Mini Serial Adapter (2M1709)
• Mounting bracket and mounting hardware
Gallagher TWR-1 Weigh Scale Quick Start Guide
SPECIFICATIONS
Operating Temperature
-20o to 50oC
-5o to 120oF
English
Environmental Protection Rating
IP67
Input Voltage
Estimated battery run time
12 V DC
at 100% brightness
at 60% brightness
12 hours
6 hours
3 hours
16 hours
8 hours
4 hours
Weigh only
Weigh/Read
Read only
CHARGING THE BATTERY
To ensure optimum performance of the TWR-1, the internal battery may need to
be charged for up to 16 hours before first time use.
Important: If the TWR-1 is to be stored for an extended period, this should be
in a cool dry place with a fully charged battery.
1.
2.
Connect the power adapter at the base of the unit and plug the TWR-1 into a
power outlet and switch ON.
The charging icon will display on the screen.
When the charge shows 100% the TWR-1 is ready to use with or without the
power adapter.
Note:
• When the TWR-1 is in use, the battery icon
will display and show remaining charge.
• When using the scale and the charge level falls below 10% the battery icon
will flash with a red outline. You will have about 30 minutes to complete the
weighing session before the TWR-1 must be charged.
• When the charge level becomes critical the unit will shut down.
•
To check remaining run time at current settings, from the Home screen, go to
Settings
> About > Battery.
Gallagher TWR-1 Weigh Scale Quick Start Guide
UNDERSTANDING THE TWR-1 WEIGHING UNIT
Look up and add animal to
a session
Remove animal
On-screen Help
Touch to display
information about
the current screen
English
Find animal
Weigh screen
Touch Screen
Tap the screen icons,
field names or buttons
to view or enter data.
Footer bar
Weigh button
Records animal weight
Power button
Zero button
Turn TW-1 On/Off
Sets the displayed
weight to zero.
Home Button
Navigation keys
Return to the
Home screen
These buttons can be
used to navigate the
functions of the scale
as an alternative to the
touch screen.
Change mode from numeric
Backspace/Delete
to alpha text entry
Space bar
Footer bar detail
Battery charge indicator
Bluetooth status
Weighing mode
AUTO - Automatic weight lock
MAN - Manual weight lock
Panel reader status
WiFi status
Antenna connection
(for panel reader antenna)
Battery charger
USB port
Loadbar connections
Serial port
USB port
(connect to PC)
(for memory stick)
(mini adapter supplied to
change connector sex)
Gallagher TWR-1 Weigh Scale Quick Start Guide
INSTALLATION
English
Installing the TWR-1
The TWR-1 can be placed on a table top or mounted
on the bracket supplied.
Installing the Scale bracket
The bracket can be mounted on a flat vertical surface, a round post, or a rail.
To mount the bracket on a flat vertical surface, or a round wooden post, use
the 4 x tek screws included with the unit.
To mount the bracket on either a vertical or horizontal bar, use the ‘U’ bolts
included with the unit.
Important:
It is not recommended to mount the TWR-1 bracket on the weighing crate or
chute as interaction with the scale can impair weighing performance.
Gallagher TWR-1 Weigh Scale Quick Start Guide
If using loadbars, follow these steps:
1. Select a weighing site that provides a solid, level and well drained surface.
2. Ensure the loadbars and platform are well secured and clear of any
obstructions.
3. Either bolt the loadbars to the concrete pad or locate them on studs set into
the concrete. It is important that the loadbars and platform sit flat without
any rocking or twisting to avoid weighing inaccuracies.
Note: It may be necessary to shim the loadbars or platform to ensure there
are no twisting pressures within the platform. Weights should be evenly
distributed over the top of the weigh bars.
4. Connect the loadbar cables to the base of the TWR-1.
A beep will sound indicating a successful connection/ disconnection of the
loadbars.
English
Installing the loadbars
WARNING – Do not weld the loadbars or any structure that they are
attached to. Loadbars contain sensitive electronic devices which will be
damaged by welding. Damage caused by welding will void warranty.
Position the TWR-1:
•
•
•
clear of the platform to ensure it does not interfere with the flow of
animals during the weighing cycle
within easy reach of the loadbar leads
within easy reach of the operator (for manual weighing)
Gallagher TWR-1 Weigh Scale Quick Start Guide
Installing the Antenna Panel
The TWR-1 has an internal reader, that when connected to a Gallagher Antenna
panel will capture the Electronic ID tag data.
English
To weigh animals in a crush, you will need:
• Gallagher Antenna Panel kit
• 4m Antenna Extension Cable G05600 or
6m Antenna Extension Cable G05602
Note: A short adapter cable G05601 may be required on early versions of the
Sheep Auto Drafter made prior to 2018.
To mount your Antenna panel, refer to the instructions included with the panel.
Important: Use the defined mounting holes, because drilling through the
Antenna Panel will damage the antenna.
Attaching the TWR-1 to the Antenna Panel
1.
2.
Ensure the TWR-1 is turned OFF.
On the Antenna Panel, unscrew the Amphenol connector locking nut from the
Amphenol socket and pull it down to unplug from the Antenna Panel.
Amphenol connector
Mounting bracket
Amphenol connector (2.)
Mounting holes
Mounting holes
2.
Antenna Cable
Mounting holes
3.
4.
5.
Mounting holes
Connect the extension cable to the Amphenol connector and tighten, then
connect the other end of the extension cable to the Antenna connector on
the base of the TWR-1.
Tighten the locking nut.
Refer to Connecting Equipment to the TWR-1 (p. 8) to complete the EID
Reader connection on the TWR-1.
Gallagher TWR-1 Weigh Scale Quick Start Guide
The first time the TWR-1 is powered on, the First Time Start‐Up screen will display.
Tap the screen to update the language, time, date and weight fields as required
and then tap Save.
To change any of these settings later, they can be accessed via Settings
right of the Home screen.
English
FIRST TIME START-UP
on the
For more information about this screen or any TWR-1 screen, tap
displayed in
the top right corner of the screen. This will display the On‐screen Help with more
information about what you see on the screen.
Note: The navigation keys on the keypad can be used at any time to select the
TWR-1 functions, as an alternative to the touch screen.
Auto Shutdown
When the TWR-1 is left idle for more than 30 minutes it will automatically
shutdown to preserve the battery.
Press the Power button to turn the unit back on.
Gallagher TWR-1 Weigh Scale Quick Start Guide
CONNECTING EQUIPMENT TO THE TWR-1
English
Connecting an EID Reader
•
The TWR-1 internal reader can be used with or without loadbars connected.
To use the internal reader, you must first connect the antenna panel. Refer to
Attaching the TWR-1 to the Antenna panel (p. 6)
•
A Hand-held EID Reader or permanent reader can be connected to the TWR-1
by either a serial cable or via Bluetooth®.
1.
2.
If using a hand-held reader or permanent reader, turn On the EID Reader.
For all readers, turn On the TWR-1.
3.
4.
On the TWR-1, tap Settings
> Equipment Connections > EID Reader.
Select how the Reader is being connected. This will be by Bluetooth, Serial
cable or using the internal reader (Panel).
If using the internal reader, a successful connection will show as
in the
footer bar.
Note: A mini serial adapter is included with the TWR-1 if a female serial
connection is required.
Important: The TWR-1 can also be connected to via Bluetooth as a “Slave”,
by initiating the connection from the reader. A pass-code of “0000” may be
required to complete this connection.
Refer to Bluetooth – Connect EID Reader in the TWR-1 On-screen Help or your EID
Reader User Manual for further information on pairing the reader.
Connecting to a Drafter/Sorter
To connect the TWR-1 to a drafter, use the data cables supplied with your drafter.
Refer to your Drafter User Manual for more information.
1. Turn On the TWR-1.
2.
3.
On the TWR-1, tap Settings
> Equipment Connections > Drafter.
Specify the type of drafter that is being connected, to complete the setup.
If your drafter is not listed, tap Create Custom and follow the configuration
wizard set up your drafter.
Gallagher TWR-1 Weigh Scale Quick Start Guide
When you gather information about an animal, it is recorded in a Session. Each
event such as weighing, adds a record to the current session.
A template using pre-determined defaults can be set up and used each time you
start a new session.
Note: It is recommended a new session is opened for a new day’s activity or for
a new group of animals. An animal cannot appear within the same session more
than once.
To start a new weighing session:
1.
From the Home screen, tap New.
displayed.
2.
Tap Quick Start to open the Weigh screen with the scale default settings.
Note: To set up and use templates, refer to the TWR-1 On-board Help.
English
START A SESSION
The New Session screen is
To customize the session:
click on the OPTIONS
button at the lower left of
the screen. Here you can
set up the weighing mode,
drafting options and name
for the session. Refer to
Session Options (p. 11) for
more information.
Note: Before weighing, 0.0 should be displayed. If not, press
3.
4.
Load the animal onto the platform.
If using the internal reader, the animal’s Electronic ID will be scanned, or you
can scan with a hand-held reader and record the animal’s Visual Tag Number.
Note: The internal reader will only read a tag when loadbars are connected
and weight is detected on the weighing platform.
5.
If weighing in AUTO - Automatic weight lock, the scale will lock on to the
weight and hold it on the screen until the animal leaves the platform.
If weighing in MAN - Manual weight lock, you must first press Weigh
When the weight becomes stable, it will lock.
6.
Move the animal off the platform.
Important: If the weight displayed does not always return to 0.0 after weighing,
check for dirt or manure that may have been left on the platform.
The TWR-1 can be re-zeroed by pressing
Gallagher TWR-1 Weigh Scale Quick Start Guide
English
Notes:
• When the weight locks, there will be a beep (if turned on in Settings) and a red
light above the Weigh button displays briefly.
•
Other information, for example: Notes, can be entered once the weight has
locked or an ID has been entered.
•
In either mode, you can re-weigh an animal by pressing Weigh
successful weight lock.
•
If drafting is turned on, the gate number and group will display, in top right
corner of the screen, indicating the drafting category. Tap this box to override
the drafting decision.
•
By default the scale will automatically zero any debris left on the platform
between 2-5kg depending on the capacity of your loadbars. This can be
altered in the connected loadbar settings.
after a
Reading tags with the Internal Reader
When the internal reader is connected it will display as
in the screen footer.
• If no loadbars are detected, the internal reader will always be active, ready to
read a tag and will display as
•
If loadbars are connected, the footer will display
on the platform.
until a weight is detected
The symbol will then change to
, as it reads the tag. The internal reader
will go in and out of active mode as it detects weight on the weighing
platform.
10
Gallagher TWR-1 Weigh Scale Quick Start Guide
English
Session Options
The Session Options menu is used to configure settings for the current session.
From this screen, tap the required option to change the session name, turn drafting
On or Off, change the weight lock mode and configure Advanced settings.
Tap Save to keep any changes.
Note: Use the On Screen Help
for step by step information to set up drafting a
or to configure the Advanced settings.
11
Gallagher TWR-1 Weigh Scale Quick Start Guide
VIEW ANIMAL INFORMATION
English
The information collected during a session can be viewed from the session’s
Weigh screen.
To view information about
all the animals in the
session;
tap All Animals,
tap
Tap
to view weight range
of animals.
To view information about an
individual animal weighed;
tap
Tap an animal VID to view this
animal on the Weigh screen.
Tap
to view the history
of weights for the selected
animal, from the Weigh
screen.
12
Gallagher TWR-1 Weigh Scale Quick Start Guide
CARE AND MAINTENANCE
Listed below are guidelines for keeping the TWR-1 in good condition.
• Do not submerge the TWR-1 in any liquid.
• Store in a cool, dry place. Avoid storing in direct sunlight.
• After use, clean with a damp cloth. Take care not to scratch the display.
• If storing the TWR-1 for a long time, store with the battery charged.
English
The TWR-1 is a tough and reliable product designed for use in typical livestock
environments. Proper care and maintenance can extend its life.
Software Updates
It is important to update the TWR-1 software from time to time to ensure you
have the latest enhancements. Updates are regularly released to enhance the
features of the scale or to correct issues.
These updates can be accessed from the following website:
https://am.gallagher.com/downloads/
Follow the steps below to update the Weigh Scale software:
1. Download the updater file from the website and save to a USB flash drive.
2. Turn the TWR-1 off.
3. Insert the USB flash drive and turn on the TWR-1.
The scale will recognise there is a USB stick inserted and begin the upgrade
process.
4. Follow the instructions on the screen to complete the update.
CONNECTING THE TWR-1 TO A COMPUTER
In order to transfer data on or off the TWR-1, you need to establish a connection
between the TWR-1 and a PC/laptop that has Animal Performance Software (APS)
software installed.
• Plug the USB cable supplied into the TWR-1.
• Plug the other end of the cable into a USB COM port on your
computer.
• Turn on the TWR-1.
• Use APS to complete the connection and transfer information
to and from the TWR-1.
See the APS Standard User Manual for further details.
Note: It is also possible to connect the TWR-1 to a PC using a WiFi connection.
Firewall settings may need to be adjusted to allow this connection.
13
Gallagher TWR-1 Weigh Scale Quick Start Guide
APPROVALS AND STANDARDS
English
This symbol on the product or its packaging indicates that this product must
not be disposed of with other waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection
point for the recycling of waste electrical and electronic equipment. The
separate collection and recycling of your waste equipment at the time of
disposal will help conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment. For more
information about where you can drop off your waste equipment for recycling,
please contact your local city recycling office or the dealer from whom you
purchased the product.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by Gallagher Group
Limited could void the user’s authority to operate the equipment
14
Industry
Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
This radio transmitter (IC: 7369A-G0260X) has been approved by Industry
Canada to operate with the antenna types listed below with the maximum
permissible gain and required antenna impedance for each antenna type
indicated. Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this
device.
Antenna Types:
- BR600 Small Antenna Panel (G03121)
- BR1300 Large Antenna Panel (G031424)
- Sheep Auto Drafter Antenna Panel (G05714)
English
Gallagher TWR-1 Weigh Scale Quick Start Guide
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any
use by Gallagher Group Limited is under license. Other trademarks and trade names are those of their
respective owners.
15
3E4847 08/18
www.gallagher.com
Gallagher Private Bag 3026, Hamilton, New Zealand

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c143 79.161210, 2017/08/11-10:28:36
Create Date                     : 2018:08:09 13:58:47+12:00
Metadata Date                   : 2018:08:09 13:58:52+12:00
Modify Date                     : 2018:08:09 13:58:52+12:00
Creator Tool                    : Adobe InDesign CC 13.0 (Windows)
Instance ID                     : uuid:27f384af-3a49-4f25-9512-f48f230d48be
Original Document ID            : xmp.did:794a875c-14a5-0f49-b282-fa12ca01890a
Document ID                     : xmp.id:72ad609f-02aa-e64e-a059-8d1fa15940b6
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:5425a4ef-dcc0-ae4c-8463-65aca78abee3
Derived From Document ID        : xmp.did:d88b5989-bc98-124c-937b-8b10c7781070
Derived From Original Document ID: xmp.did:794a875c-14a5-0f49-b282-fa12ca01890a
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Windows)
History Changed                 : /
History When                    : 2018:08:09 13:58:47+12:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CC 13.0 (Windows)

EXIF Metadata provided by EXIF.tools