Gallagher Group G03300 Smart Reader HR1 User Manual 3E0978 SmartReader HR1 indd

Gallagher Group Ltd Smart Reader HR1 3E0978 SmartReader HR1 indd

User Manual

SmartReader HR1User Manual
PUBLISHED BYGallagher Group LimitedKahikatea Drive, Private Bag 3026Hamilton, New ZealandCopyright© Gallagher Group Limited 2007.All rights reserved. Patents Pending.Gallagher SmartReader HR1 User Manual3E0978 - Edition 1 - January 2008DISCLAIMER Whilst every effort has been made to ensure accuracy, neither Gallagher Group Limited nor any employee of the company, shall be liable on any ground whatsoever to any party in respect of decisions or actions they may make as a result of using this information.In accordance with the Gallagher policy of continuing development, design and specifi cations are subject to change without notice.Developed and manufactured by Gallagher Group Limited, an ISO 9001:2000 Certifi ed Supplier.
3 Table of ContentsOverview 5Tag types read ......................................................................................................... 5Care and Maintenance ............................................................................................ 5Configurator Software .......................................................................................,.... 5User information 6Kit Contents ............................................................................................................. 6Accessories ............................................................................................................... 6Terminology ............................................................................................................. 6SmartReader HR1 features ..................................................................................... 7Power options ......................................................................................................... 8Setting up the SmartReader HR1 ........................................................................... 9Using the SmartReader ........................................................................................ 10Approvals and Standards 11Waste Electrical and Electronic Equipment 11
5 OverviewThe Gallagher SmartReader HR1 is a hand held Electronic ID reader which allows the user to read ISO animal Electronic ID tags.Tag types readThe Gallagher SmartReader HR1 enables you to read both HDX (Half Duplex) and FDX-B (Full Duplex-B) Electronic ID tags.Care and MaintenanceThe SmartReader HR1 is a tough and reliable product designed for use in typical livestock environments. However, proper care and maintenance can extend the SmartReader’s life. Listed below are guidelines for keeping the SmartReader in good condition.For optimal life, Gallagher recommends that you store the SmartReader in • a cool, dry area (15 to 25 ° Celsius) out of direct sunlight.After use, clean the SmartReader with a damp cloth.• Configurator softwareThe Confi gurator is a software program that can be used to alter user settings on the SmartReader. This software program is not supplied with the SmartReader, however it can be downloaded.The Confi gurator is for advanced users and should be used with care as altering settings affects the operation of the SmartReader.For further details refer to the SmartReader HR1 Confi gurator Help (accessible via the Help menu in the Confi gurator program).
6 User informationKit ContentsThe Gallagher SmartReader HR1 box contains: Gallagher SmartReader HR• 1 with Reader to RS232 (weighscale comms/power) cable12 volt battery cable• Instruction manual• AccessoriesGallagher is able to provide a USB to RS232 adaptor if needed.TerminologyThe following are terms and abbreviations used throughout this manual:Electronic ID tag number The Electronic ID tag number is the electronic code in an ear tag that can be scanned to recognise an individual animal.Antenna Contains the aerial used to capture Electronic ID tag data.Activate the SmartReader Power up the SmartReader ready for use.Double-Click Two quick successive clicks of the SmartReader trigger.Read period The time the SmartReader is actively scanning for Electronic ID tags. Once the read period ends the SmartReader antenna is turned off. Default time is three seconds. This time can be altered. See the SmartReader HR1 Confi gurator User Manual.Scale A digital weighing display unit that detaches from loadbars and connects to your computer.Scan for tags Connect the SmartReader to a power source and single-click the trigger. This activates the antenna and makes it ready to read Electronic ID tag data once the tags move within the reader range.Single-Click A single click of the SmartReader trigger.
7 SmartReader HR1 featuresTriggerUse the trigger to activate the SmartReader and collect tag data.Single-Click• - A single click of the SmartReader trigger.Double-Click• - Two quick successive clicks of the SmartReader trigger.BeeperThe beeper sounds in the following situations:on power up• after a successful Electronic ID tag read• when the trigger is pulled (single beep)• on a duplicate tag read (two beeps). See • Duplicate Tags (p 12)the beeper can be turned on and off. See • SmartReader HR1 Confi gurator User Manual.LampThe lamp (red) illuminates for the following reasons:When the SmartReader scans for Electronic• ID tags, the red lamp fl ashes on and off.On a successful tag read. The lamp remains• solid for an extended period.Note: If a tag is not read within theread period the lamp stops fl ashing.The timing of the lamp illumination can be altered, see the SmartReaderHR1 Confi gurator User Manual.Cable connectorA Data and power cable is permanently attached. This enables:data to be transferred to a computer• data to be transferred to scales• the • 12V battery cable to power the SmartReader.The cable connector is a serial port. All tag data is sent outthis port.
8 AntennaAny Electronic ID tags that come within 27 cm of the Antenna will be read, with the possiblity of tags up to 33 centimetres awayalso being captured. If there is more than one tag in the range of the reader, neither tag will get read.Power optionsThis section describes how to power the SmartReader. There are two options:using a 12 V battery for power, or• using a scale for power• Operating using a 12 V batteryTo operate the SmartReader using a 12 V battery, use the following steps:Plug the 1. 12 V battery cable to the Data and power cable DB9 connector using the 2.5 mm Coaxial plug.Connect the 2. 12 V battery cable to the 12 V battery.Connect the Red lead to the positive terminal.Connect the Black lead to the negative terminal.Note:If powered from a battery in a vehicle, the engine must not be running.
9 Operating using a ScaleTo operate the SmartReader using a scale, use the following steps:Plug the 1. Data and power cable DB9 into the Scale.On a Gallagher Scale connect to Port 2.Turn on the Gallagher Scale.2. Set up the Gallagher Scale to receive the Electronic ID tag data. See 3. Setting up the Scale (below).Note: If you are connecting to a computer or other data logging device you need to have software running (not supplied) to collect the Electronic ID tag data.Test the connection between the Scale and the SmartReader, see 4. Testing the connection between Scale and SmartReader (p 10).Setting up the SmartReader HR1Depending on how you intend using the SmartReader HR1 you may need to set one or both of the following options:the connection to Scale, see • Connecting to the Scale (next).you can also connect to a computer or other data logging device. • See “Connecting the SmartReader to the computer” in the SmartReader HR1 Confi gurator User Manual.Connecting to the ScaleBefore operating, you need to setup and test the connection to the Scale. See Testing the connection between Scale and SmartReader (p 10).Note: You can also connect to a computer or other data logging device. See “Connecting the SmartReader to the computer” in the SmartReader HR1 Confi gurator User Manual.Setting up the ScaleConsult the User Manual supplied with your scale. It is likely you will have to assign a communications port (the SmartReader connects to COM 2 on the Gallagher Scale).
10 Testing the connection between Scale and SmartReaderOnce the connection between the SmartReader and Scale is established you need to test the Scale is receiving the Electronic ID tag data from the SmartReader.Activate the SmartReader.1. Scan an Electronic ID tag.2. Did the Electronic ID tag number display on the Scale?3. If • yes, the connection is working.If • no, the connection is not working. Check the following:• that the Scale is set up correctly, including the Scale communications port.• that the RS232 plug is fi rmly attached to the correct socket on the Scale.Using the SmartReaderOnce you have set up the SmartReader you are ready to use it to capture Electronic ID tag data.For details on how to set up the SmartReader, see Setting up the SmartReader HR1 (p 9).Single-Click the trigger to scan for Electronic ID tags.1. Move the tip of the SmartReader towards the Electronic ID tag on the 2. animal.Once an Electronic ID tag is read the SmartReader beeps and the lamp illuminates for an extended period. Repeat steps until all animals Electronic ID tags are read.3. Notes:The SmartReader beeps twice if a duplicate tag is read.• The SmartReader stops scanning for Electronic ID tags once a tag is read. • You need to Single-Click the trigger to scan for the next Electronic ID tag.If an Electronic ID tag is not read within the read period the SmartReader • stops scanning for tags.Duplicate tagsEach tag read is placed in a temporary storage area referred to as a buffer. The tag buffer can store a single tag. A tag is retained until the SmartReader is disconnected from its power source. The duplicate tag checking option can be altered with the Confi gurator. For further details refer to the SmartReader HR1 Confi gurator User Manual.
11 Approvals and StandardsThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from • that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.• CAUTIONChanges or modifi cations not expressly approved by Gallagher Group Limited could void the user’s authority to operate the equipment.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The carrier frequency is 134.2 kHz, the RF output power is 75 dBµV/m @ 10 m.This Category II radiocommunication device complies with Industry Canada Standard RSS-310.Ce dispositif de radiocommunication de catégorie II respecte la norme CNR-310 d’Industrie Canada.FCCIndustryCanadaWaste Electrical and Electronic EquipmentThis symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling offi ce or the dealer from whom you purchased the product.
MODEL.................................................................SERIAL NO.................................................................DATE PURCHASED.................................................................This product is guaranteed free from defects in material or workmanship for a period of two years from date of purchase by the end user. Gallagher will repair or replace at their option any faulty product returned to them or their Dealer within this time period. Freight/forwarding costs incurred by the Customer in the warranty process remain the responsibility of the Customer.This warranty does not cover damage (including subsequent corrosive damage) due to: Unauthorised repairs • Modifi cations• Failure to follow care and maintenance • guidelines described in the User ManualPhysical Mishandling • Lightning Strike• Floods, fi res or acts of God• Use of an arc welder on loadbars or • equipment or steelwork attached to loadbars while a WeighScale is connectedGallagher, their Distributors, and their Dealers accept no responsibility for the misuse of this product. Gallagher, their Distributors, and their Dealers accept no responsibility for any ac-cident caused subsequently to any tamper-ing with or modifi cation to or misuse of this product.Gallagher, their Distributors, and their Dealers accept no liability for consequenc-es and/or secondary damages or losses of any kind sustained directly or indirectly, a result of failure or defect in any product, material, installation or service.PLEASE READ INSTRUCTIONS CAREFULLY BEFORE USE.PLEASE COMPLETE DETAILS AND KEEP WITH YOUR RECEIPT — IT IS YOURPROOF OF WARRANTYTWO YEAR WARRANTYFOR THIS PRODUCT FROM DATE OF PURCHASE

Navigation menu