Gantner Pigeon Systems EXPRESS Racing Pigeon Registration Transmitter (RFID) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	278824
Application ID	Oxaq9Mrs36+Vrhqs5zBtLQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.01kB (550129 bits)
Date Submitted	2002-10-24 00:00:00
Date Available	2002-10-24 00:00:00
Creation Date	2002-10-15 15:01:10
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2002-10-23 14:37:20
Document Title	Users Manual

EXPRESS
Club System
USER MANUAL
VERSION 1.23
ENGLISH
Art.No.: 785727
” Copyright 2001 by GANTNER ELECTRONIC GMBH, Schruns (Austria).
Copyrights: Operating instructions, manuals and software are protected by copyright. All
rights reserved. Copying, duplication, translation, conversion into any electronic medium or
any machine-readable form, as a whole or in parts, is not permitted, with the exception of
making a back-up copy of the software for saving purposes, as far as this is technically
feasible and is recommended by our company. Contravention will lead to compensation.
Limitation of Liability: GANTNER ELECTRONIC GMBH products are not designed,
intended, or authorized for use as components and medical systems, or other applications
indeed to support or sustain life, or for any other application in which the failure of the
GANTNER ELECTRONIC GMBH product(s) could create a situation where personal injury or
death may occur. Any claims against GANTNER ELECTRONIC GMBH in connection with the
hardware and software products described in this manual can exclusively be based on the
terms and conditions of warranty. Any further claims are excluded, in particular GANTNER
ELECTRONIC GMBH does not grant any warranty as to the correctness of the contents of
this manual. We reserve the right of making changes without advanced notice. The manual is
not a general instruction for the pigeon sport, it describes exclusively the general handling
of the EXPRESS system.
Trade Marks: Without listing details, we want to point out the usage of terms, brands,
labels and registered trade marks, in particular those of Microsoft Corporation, International
Business Machines Corporation and Intel Corporation.
This user manual does not claim to be complete nor to be free from mistakes, errors or
omissions. Neither is it a general instruction for the pigeon sport, but it describes exclusively
the general handling of the EXPRESS system.
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
2
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
TABLE OF CONTENTS
TABLE OF CONTENTS
1.
1.1.
2.
2.1.
3.
3.1.
3.2.
3.3.
3.4.
4.
4.1.
4.2.
4.3.
4.4.
5.
6.
7.
8.
INTRODUCTION ..................................................................................................
Preface .........................................................................................................................
SYSTEM ................................................................................................................
System Components at the Club ....................................................................................
Club Printer Node (CPN) ................................................................................................
Clock ............................................................................................................................
Internal Antenna ...........................................................................................................
ATIS Power Supply Unit ................................................................................................
Red Badge ....................................................................................................................
Orange Badge ...............................................................................................................
Green Badge .................................................................................................................
Printer ..........................................................................................................................
OPERATING INSTRUCTIONS ..............................................................................
General Information ......................................................................................................
Registration ..................................................................................................................
Basketing ......................................................................................................................
Evaluation ....................................................................................................................
APPLICATIONS ....................................................................................................
Registration ..................................................................................................................
Basketing ......................................................................................................................
Registration While Basketing .........................................................................................
Evaluation ....................................................................................................................
Download .....................................................................................................................
GENERAL INSTRUCTIONS ...................................................................................
SAFETY INSTRUCTIONS ......................................................................................
TECHNICAL DATA ................................................................................................
GUARANTEE AND LIABILITY ..............................................................................
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
10
12
13
13
14
17
18
22
25
26
27
28
EXPRESS – Club System
TABLE OF CONTENTS
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
INTRODUCTION
1.
INTRODUCTION
1.1. Preface
Dear customer,
By purchasing our club system EXPRESS you have made your choice of a reliable highquality system, offering you considerable advantages in the practice of racing pigeons.
After unpacking the different components we would kindly ask you to read this manual
carefully, as it contains important information on how to install and operate the complete
club system EXPRESS quickly, safely and efficiently.
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
SYSTEM
2.
SYSTEM
2.1. System Components at the Club: EXPRESS
•
•
•
•
•
•
•
•
•
CAN (with internal Clock)
CPN (printer node equipped with serial and parallel interface)
CNN
ATIS Power Supply unit to be plugged in ( only when delivered, not when exchanged)
red badge (registration)
orange badge (basketing)
green badge (evaluation)
connection power cable EXPRESS ÅÆ CNN
connection power cable CPN ÅÆ PC (small plug DB-9 to small plug DB-9)
Before you assemble your new club system please check the complete existence of all
components.
Club Printer Node - CPN
The CPN is equipped with a DB 25 plug used to connect a parallel printer, disposes of a DB 9
plug used to connect a PC respectively an external clock as well as a fixed cable to connect
the CNN:
Parallel Printer
Cable Running
to the CNN
PC or External Clock
(if desired)
LED Yellow
(Communication)
LED Green
(Power Supply)
Bild 1.1 – Connections at the CNN
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
SYSTEM
Clock
The clock is an important part of the club system. The internal clock of the CAN is standard
equipment. If desired an external clock can be delivered (a radio clock, a Masterclock or a
GPS clock).
If an external clock is used the CAN clock is automatically turned off.
Internal Antenna
If no CAN (external clock) is used the pigeons have to be registered and basketed with the
internal antenna of the EXPRESS.
Make sure that the EXPRESS is not installed above a compact metal surface as this can
influence the correct performance of the internal antenna. Therefore a minimum distance of
6 centimeters (2.4 inches) should be kept between the EXPRESS and the metal surface. No
particular distance however is required between small metal parts like screws, nails or metal
bars and the EXPRESS.
Advice: The distance between a PC screen and the EXPRESS has to be at least 50
centimeters (19.7 inches).
ATIS Power Supply Unit
The ATIS Power Supply Unit is connected with the mains (110/230 volt) and supplies the
CPN, the CNN, the EXPRESS and the club antenna (CAN) with the necessary low voltage
(direct current of about 12 volt).
Advice: Only use a power supply unit recommended by your ATIS supplying agent!
Red Badge
This badge enables the user to authorize the registration of the pigeons. The person in
charge of the registration is also in possession of the red badge.
Orange Badge
This badge enables the user to basket the pigeons at a race. It is in possession of the race
secretary who is also responsible for the correct operation.
Green Badge
This badge enables the printing of the evaluation list. It is left in the custody of the race
secretary who is also in charge of the correct operation.
Printer
The EXPRESS cannot be used with every printer. The following printers guarantee for a
correct performance:
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
SYSTEM
• Canon BJC 240
• Epson LX 300
• Epson Stylus Color P2
• HP Laser Jet IIIp
• HP Desk Jet 500
If you use another printer than those mentioned above, try its performance or contact your
delivering agent.
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
OPERATING INSTRUCTIONS
3.
OPERATING INSTRUCTIONS
3.1. General Information
There are two types of club systems. The club either uses only the EXPRESS or the
EXPRESS and the ATIS TOP together. The latter will be described in part 2 of the user
manual. As standard equipment a CAN is used with an internal clock, thus turning off
automatically the internal antenna of the EXPRESS.
If no CAN is connected the internal antenna of the EXPRESS has to be used.
Important Advice: All components of the system have to be connected first before
plugging it in. After having plugged in the power supply unit the system is started.
3.2. Registration
EXPRESS at the Club
To register the pigeons at the club (before the race season starts):
PC
CAN
Power Supply
CPN
CNN
Printer
EXPRESS
Picture 3.1. - Register Pigeons at the Club
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
OPERATING INSTRUCTIONS
250 pigeons can be displayed
250 pigeons can be set for the races
1. The fancier takes his pigeons and EXPRESS to the club.
2. The EXPRESS is connected with the club system like shown in picture 3.1. The functions
are then released with the red badge (registration).
3. The ring numbers are typed into the EXPRESS via PC.
4. The ring numbers are written on the chip code rings.
5. You can keep track of possible errors on the PC screen.
6. All details of club members and registered pigeons will be printed in full.
3.3. Basketing
EXPRESS at the Club
Basketing of the pigeons at the club.
Printer
CAN
Power Supply
CPN
(External Clock)
CNN
EXPRESS
Picture 3.2. - Basketing Pigeons at the Club
10
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
OPERATING INSTRUCTIONS
Normally the internal clock of the CAN is used. Yet if desired an external clock (a radio
clock, a Masterclock or a GPS clock ) can be used.
When connecting the first EXPRESS with the club system the internal clock has to be set
(see instructions on page 14).
No changes in the list of pigeons can be made unless you delete the race first.
The security code cannot be set nor be displayed. The number is shown only on the race
evaluation.
1. The fancier takes his pigeons and EXPRESS to the club and connects the EXPRESS with
the club system. The functions are released with the orange badge (basketing).
2. The pigeon is held over the CAN (or the internal antenna if an external ring clock is
used), the secret number is written on the chip code ring and the number is shown on
the EXPRESS display.
3. The EXPRESS is automatically sychronized with the internal clock of the CAN and then
runs precisely via an internal quartz (an external clock is available only if desired).
Possible differences of the clock will be considered in the calculations when evaluating
the race. The advantage of this procedure is the fact that the clock is under constant
surveillance of the race secretary during the whole race.
4. The race is activated as soon as the first pigeon is basketed. While the race is activated ...
- the date and time is locked
- pigeons cannot be deleted
- pigeons can only be basketed for one race.
5. The EXPRESS is handed back to the fancier.
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
11
EXPRESS – Club System
OPERATING INSTRUCTIONS
3.4. Evaluation
EXPRESS at the Club
To print and delete the race evaluation
Printer
CAN
Power Supply
CPN
(External Clock)
CNN
EXPRESS
Picture 3.3. – Evaluation of races
If desired the internal clock can be reset here when connecting the first EXPRESS to the
club system (see page 14 – basketing).
1. The fancier takes his EXPRESS to the club and connects it with the club system. The
functions are then released with the green badge (evaluation).
2. Now the race can be chosen and the corresponding race evaluation is printed.
3. After the race evaluation has been printed it can be deleted.
12
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
APPLICATIONS
4.
APPLICATIONS
The club system enables you to register and basket the pigeons, to print evaluations and to
update the EXPRESS with a new software - download (see chapter 4, pages 22-24).
4.1. Registration
For registration the following parts are needed:
• CPN (printer node) and CNN (network node)
• Connection power cable EXPRESS Å Æ CNN
• PC with the software of the club and a connection power cable
• EXPRESS
• Red badge
• Printer
• Parallel Printer Cable
PC
CAN
Power Supply
CPN
Printer
CNN
EXPRESS
Picture 4.1. - Registering Pigeons at the Club
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
13
EXPRESS – Club System
APPLICATIONS
1. Connect the EXPRESS with the club system (CNN).
0-1-000-HH:MM:SS
2. Hold the red badge (registration) over the internal antenna (or CAN). A short bleep will
tell you that the badge has been recognized.
EXPRESS ---
PC
Position <1> flashes as long as the communication with the PC is on.
EXPRESS ---
PC
3. Boot the PC and start the software of your club.
4. From now on you will be working on your PC.
5. If you keep the "OK" key pressed for more than 5 seconds you will start the printer
which then prints out the list of registered pigeons.
4.2. Basketing
For registration the following parts are needed:
• CPN (printer node) and CNN (network node)
• Connection power cable EXPRESS Å Æ CNN
• EXPRESS
• Orange badge
• Printer
• Parallel printer cable
• CAN (internal clock)
14
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
APPLICATIONS
If desired an external clock (a radio clock, a Masterclock or a GPS clock) can be used
instead of the CAN.
Printer
CAN
Power Supply
CPN
(External Clock)
CNN
EXPRESS
Picture 4.2. – Basketing Pigeons At The Club
1. Connect the EXPRESS with the club system (CNN). After a short system check the
following appears on the display.
CAN-Mode
2. Keep the "OK" and "Break" key pressed for 5 seconds (only if using the internal clock of
the CAN) and you will get into the configuration mode "9". Here you have to select
position "04" with the "Cursor" keys and then press the "OK" key in order to set the
internal clock of the CAN.
The cursor is moved with the "OK" key and you can increase and decrease the
corresponding numbers with the "Cursor" keys. If you confirm the inserted data it will
be stored.
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
15
EXPRESS – Club System
APPLICATIONS
By using the "Break" key the procedure can be interrupted. The EXPRESS will get back
into the loft mode.
3. Hold the orange badge over the internal (or CAN) antenna. A short beep will tell you
that the badge has been recognized. The orange LED and position <2> are flashing at
the same time and the following appears on the display:
1 2 3
4. The two keys showing arrow up/down enable you to choose the race number which is
used to basket the pigeon.
5. Choose the race number and then press the "OK" key. Position <2> stops blinking.
Notice: The number of races is limited to 3.
2-1-000-
6. If a pigeon is hold over the CAN (or internal antenna) the following appears on the
display:
2-1-00099-CL-12345678-1
Now all pigeons that are not set for a race can be basketed.
7. If you keep the "OK" key pressed for more than five seconds you will start the printer
which then prints out the list of pigeons basketed.
16
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
APPLICATIONS
Now the orange LED is permanently on which tells you that the race has been started.
The light will continue to be on until the race has been deleted.
2-1-00099-CL-12345678-1
If you want to print out the race, you have to choose the same race number again.
Error: If the printer is not connected correctly or off, or if there is no paper in the
printer, the following appears on the display after about 10 seconds:
ERROR
301
Please check if the printer is correctly connected or if there is enough paper in the
printer
By pressing the function key "OK" you continue printing.
Notice: If you have forgotten to basket a pigeon for a race you can basket the pigeon
later at any time chosen.
Registration While Basketing
If a chip code ring is not recognized while basketing, it is possible to use a new ring.
1. Hold the red badge over the CAN (or the internal antenna) and the following appears
on the display:
5-01-001
99-CL-12345678-1
2. By using the two keys showing arrow up/down you choose the pigeon with the faulty
chip code ring on the list of the registered pigeons
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
17
EXPRESS – Club System
APPLICATIONS
3. Press the "OK" key and hold the new chip code ring over the CAN (or the internal
antenna).
The new ring number appears on the display:
6-01-001
99-CL-12345678-1
The pigeon ring is written again and you can continue basketing.
By using the function key "Break" you can continue basketing without writing the new
ring.
4.3. Evaluation
In order to print and delete a race the following parts are needed:
• CPN (printer node) and CNN (network node)
• Connection power cable EXPRESS Å Æ CNN
• EXPRESS
• Green badge
• Printer
• Parallel printer cable
• CAN (internal clock)
• External clock (only if desired)
An external clock (radio clock, Masterclock or a GPS clock) can be used instead of the CAN.
18
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
APPLICATIONS
Printer
CAN
Power Supply
CPN
(External Clock)
CNN
EXPRESS
Picture 4.3. – Evaluating Races At The Club
1. Connect the EXPRESS with the club system (CNN).
CAN-Mode
2. If desired the internal clock of the CAN can be read out (9-03) or it can be set (9-04)
before the evaluation (see Page 14 - Setting).
3. Hold the green badge over the CAN (or the internal antenna). A short bleep will tell you
that the badge has been recognized. The green LED and position <3> are flashing und
the following appears on the display:
1 2 3
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
19
EXPRESS – Club System
APPLICATIONS
Notice: Only those races that can be printed will be shown on the second line of the
display.
4. You can choose the races by using the keys showing arrow up/down. The race number
chosen for the time being is flashing and underlined.
5. Choose the race number by pressing the "OK" key.
Now position <3> stops blinking and the evaluation mode appears on the display.
3-1-000-HH:MM:SS
6. If you keep the "OK" key pressed for 5 seconds, the evaluation list will be be
printed in full.
The green LED is constantly on until the race has been deleted.
1 2 3
Error: If the printer is not correctly connected or off, or if there is no paper in the
printer, the following appears on the display after about 10 seconds:
ERROR
301
Please check if the printer is correctly connected or if there is enough paper in the
printer.
20
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
APPLICATIONS
By pressing the function key "OK" you continue printing.
After printing you get to the evaluation menu, which can also be chosen with the green
badge.
1 2 3
1. You can choose the races by using the keys showing arrows up/down. The race number
chosen for the time being is flashing and underlined.
2. Choose the race number by pressing the "OK" key.
Now position <3> stops blinking and the evaluation mode appears on the display. The
green LED is constantly on if the chosen race has already been printed.
3-1-PPP-HH:MM:SS
3. If you keep the function key "Break" pressed for ca. 5 to 7 seconds, the chosen race is
deleted.
2 3
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
21
EXPRESS – Club System
APPLICATIONS
All LEDs will be turned off if all races have been deleted.
4.4. Download
If a new software for the EXPRESS is available it can be loaded into the EXPRESS at the
club.
The list of registered pigeons will not be influenced by this download!
For a software update the following ports are needed:
• CPN (printer node) and CNN (network node)
• Connection power cable EXPRESS Å Æ CNN
• PC with a download software and a connection power cable
• EXPRESS
• Power supply
PC
Power Supply
CPN
CNN
EXPRESS
Picture 4.4. – Download of new Software into EXPRESS
22
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
APPLICATIONS
1. Connect the EXPRESS with the club system (CNN). After a short system check the
following appears on the display:
0-1-000-HH:MM:SS
99-CL-12345678-1
2. Boot the PC.
3. Insert the disk into the 3.5 inch disk drive and change the drive:
e.g. A: 
4. Start the download software. To communicate with the EXPRESS the serial interface
COM1 or COM2 can be used. If COM1 is used:
DOWN 
If COM2 is used:
DOWN 2 
5. The progression of the download appears on the screen. First information about the
connected device will be shown, e.g.:
Device info: Type: EXPRESS
Serial number=001234
HWV=01.00 BTV=01.00 SWV=01.00
Then information about the new software version follows on the screen, e.g.:
Program File: EXP0102.GEF
Program Info: Type: EXPRESS
HWV=01.00 BTV=01.00 SWV=01.02
On the display of the EXPRESS the following appears:
loading new
software
6. After a successful download the following text appears on the screen:
Download Progress: 100%
SUCCESS: Programming over
Disconnect device.
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
23
EXPRESS – Club System
APPLICATIONS
The download can take some time, as it depends on how fast the computer performs
and may never be interrupted.
If the download is finished there will be a short bleep from the EXPRESS and the fancier
mode is started.
7. If you want to load several EXPRESS devices, start again at stage 5 and follow the
instructions from there one by one.
8. After having finished loading the last device, disconnect the cable between CPN and CNN
and reconnect it.
The download software is available for WIN 3.11, WIN 95, and WIN 98. Ask your
delivering agent or contact GANTNER ELECTRONIC GMBH.
24
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
GENERAL INSTRUCTIONS
5.
GENERAL INSTRUCTIONS
• Please check the correct position of the plugs on the CPN, CNN and the CAN and mount
the indicated plugs by using screws. Always pay attention to the correct direction when
plugging in and out.
• Before the first start check the correct setting of the internal clock of the CAN or that the
external clock (if used) receives the correct signal.
• Please make sure that the printer of your EXPRESS or ATIS TOP is correctly set. This
setting has to correspond with the type of printer connected at your club. If using the
CPN always choose the parallel printer.
• If the CPN is in operation the green LED is always on.
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
25
EXPRESS – Club System
SAFETY INSTRUCTIONS
6.
SAFETY INSTRUCTIONS
• After unpacking check the components immediately on possible damage.
• Do by no means connect a damaged set to the mains or start using it. Report to your
authorized dealer immediately.
• The components are to be opened and repaired only by the manufacturing firm or an
authorized service center. Unauthorized handling will lead to the loss of any warranty
claims whatsoever.
• Never disconnent the power supply unit by pulling its cord. Instead get hold of its case
and gently pull it out.
• The temperature surrounding the EXPRESS and the ATIS TOP should not drop down
under 0 °C (+32 ° F) nor exceed +45 °C (+113 °F). It may reach a temperature of +70 °C
(+158 °F) for the club antenna. If the temperature has fallen below 0 °C (+32 °F) which means that condensed water is possibly formed - take the EXPRESS to a place with
a room temperature of about +20 °C (+68 °F) and let it dry there for more or less one
hour. Afterwards the equipment can be used without further problems. The storage
temperature for the winter season ranges between -25 °C (-77 °F) and +70 °C (+158 °F)
for the EXPRESS and may drop to –20 °C (-68 °F) for the club antenna.
• While in use, the EXPRESS should neither be exposed to rain nor to direct sunshine.
Caution:
Any modification to the equipment not expressively authorized by the party
responsible for compliance could void the users authority to operate the
equipment
26
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
EXPRESS – Club System
TECHNICAL DATA
7.
TECHNICAL DATA
CPN
Voltage:
Current:
Interface:
Display:
Case:
Dimensions:
Weight:
Operating Temp.:
Storage Temp.:
9 to 20 VDC, regular 12 VDC
a maximum of 150 mA, regular 50 mA
(without external equipment)
RS 232C, RS 485, CENTRONICS
2 LEDs
plastic ABS
92 x 55 x 21 mm (L x B x H)
approx. 0.25 kgs
0 °C (+32 °F) to +50 °C (+122 °F)
-25 °C (-77 °F) to +70 °C (+158 °F)
Power Supply Unit to be Plugged In
Mains Voltage:
210 to 230 V 50/60 Hz
Output Voltage:
13 VDC
Power Consumption:
11 W
CNN
Voltage:
Current:
Interface:
Display:
8 to 20 VDC
approx. 20 mA
RS 485
2 LEDs (little signal lamps)
Club Antenna (CAN)
Ring types:
Voltage:
Current:
Interface:
Display:
Case:
Dimensions:
Weight:
Operating Temp.:
Storage Temp.:
Protection class:
VR 1, UCR 2
9 to 20 VDC, regular 12 VDC
0.25 A
RS 485
1 LED
plastic
210 x 210 x 31 (L x B x H)
0.38 kgs
0 °C (+32 °F) to +45 °C (+113 °F)
-20 °C (-68 °F) to +70 °C (+158 °F)
IP 52
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
27
EXPRESS – Club System
GUARANTEE AND LIABILITY
8.
GUARANTEE AND LIABILITY
For the EXPRESS we provide a
one-year limited warranty
concerning perfect material and performance. This means that all parts which prove to be
useless or defective during this period of time as a result of defective material or poor
workmanship will be exchanged or replaced free of charge.
The warranty does neither include the fees charged for the delivery of the exchanged or
replaced parts nor wear and tear nor damages stemming from careless and improper use.
The warranty will not apply if parts of the system are opened by someone who is not
explicitly authorized by us to do so.
The instructions are to be followed carefully. No guarantee or liability whatsoever will be
provided regarding the safeness against manipulation, the loss or the correctness of the
indicated, printed or transferred data or results.
A type-specific general authorization for the EXPRESS system has been issued by the BAPT
(Bundesamt für Post und Telekommunikation – Federal Bureau for Postal Services and
Telecommunication). This means that no licence is required and it may be operated free of
charge. All relevant parts of the EXPRESS system were examined according to the CE
regulations, were certified according to the EN 60950 (IEC 950) and meet the DIN/VDE
0850 guidelines. In addition the EXPRESS system already meets the requirements set up by
the ETSI (European Telecommunication Standard Institute).
28
DK_EXPRESS_Vereinsanlage-e_0123.doc
Gantner Electronic GmbH
www.gantner.com
GANTNER PIGEON SYSTEMS
Montafonerstraße 8 • A-6780 Schruns/Austria
Tel.: +43 (0)5556-73784-0 • Fax: +43 (0)5556-73784-70
E-Mail: benzing@gantner.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2002:10:15 15:01:10
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2002:10:23 14:37:20+02:00
Page Count                      : 32
Has XFA                         : No

EXIF Metadata provided by EXIF.tools