Gao Jin ZLINK20 Bluetooth Helmet User Manual
Gao Jin Industrial Co., Ltd. Bluetooth Helmet Users Manual
Gao Jin >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1866019 |
| Application ID | Zn+4lEZyb/UoC9iKlTMBnA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 187.65kB (2345654 bits) |
| Date Submitted | 2012-12-21 00:00:00 |
| Date Available | 2012-12-21 00:00:00 |
| Creation Date | 2012-11-27 11:43:30 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2012-12-21 09:17:19 |
| Document Title | SlowView prints C:\Documents and Settings\Jill.Chen\Local Settings\Temporary Internet Files\OLK8\Z-link 2 0 manual Warning Info |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | jill.chen |
Z-i ink 2. UEEE E‘REHEVLO
fiFfiffiE‘JRfiLEEEE I 194*130 riirii
fifiifi‘l’ 97*130 mm
fig"? ! LESEEIKEED i 34323 ' DDZES‘ifiEfiT i 85EaTE21$
{ERE' - 10 team?
éfié K (””E,.$L+ EE)
WARNING: Changes ar modifications to this unit not expressly approved by the party
reaacnaiaie turmrnpiianee could vatd the usar authority to operate the Iqulpmlm
This device complies with part is oi the FCC Rules.
Operation is supieet to the foliuwlng Mu wndlfiuns
(I) this device may nvl cause hanniui intederence and
Version: 1.0
(2) this flOViCi rnuat accept any intortmnoe received, including numerous that may
Must undesired operation a
cAtmort: ‘
t To earripiy with FCC RF expnsure eompiianee requirements. a seeanitteri distance at
at least 2d em must be maintained between the antenna omits deirice and all persons,
2 This Transmitter must nui be cc-ldeeted or operating in ovnluricllull With any other Cellular pm,“
antenna or transmnter
NOTE: This Inulpmtni has been tested and round to comply wiih the limits tor a class
a digital davla, pursuant to part is at the rcc nuie. Thea. iiniiis are designed In
provide reasonable platedluli against harrnrui inter-lereriee in a residential installation
This equipment generates, uses and can radiate radio treaueney energy and. r not
installed and used in aomrdanee With the instructions, may cause harmrui interlererice
to radio communications however, rheie ie no gulranioeliial interierence Will not poem
in a panicuiar Inliaiimiori, lithir equipment does cause herrniui lnhflii‘nc. to radio or
television reception, which can be dthrmlmd by tuniind lilo tflulvmwt of! and on, the
user is erieodraged to try to earreet the interieienee by one or more arthe loliatiing
measures,
. neonent or relocate die lecewllig antenna.
- Increipstho separaiion between rhe equipmeniend receiver
- Canned lhe squlpmenl into an outlet on e circuii diherent iron that to which rhe
receiver is connected
. Consult the deaieier an experienced aidie (TV ieehnieian ler help,
3!!
El fiwxlaamtflmggui
Ig+ Miaastszfim¢matm - arrgeifil r flfil ~ renaming
EFFSEEQEfiI ~ MXMIEQEEaQatzimEma: .
e+ mmb‘egmzienixieiesnungmmeze Hfifié 6,5
finale - Efififliéfii - mfl§¥w¥m§fit§flfli§lfi . M”
antesrzma r 3am! EEi’Efizfllfizfi ~ @msefieamfimeeiiaie
211: - NEE=MB§=EE§MEi¢fifi2¥m a
a Eluetootlt‘wortd trademarks and logos belong to Eluelopih slG Inc
All use or these trademarks should be authonsed
Z-link 2.0 user manual
Content
Remark beiore usage
. Eelare using Z-llnk, battery shcuid be recharged luiiy ( about 4
[Operation or Handset mode} ,
{pairing 0f lnterocni mode]
[Operation 01 intercom mode] .
[pairing elAznP mode] .
[Operation eiAzup mode]
{Pairing to cps device}
{Operation ei FM 1. R95 mode]
{Pairing te Waikie Talkie deyiee]
{Operation at Waikie Taikle made]
5. z- llnii 2. it Advanced mnctlons tor Muld- Polm conilgtrrtrlon . is
;' :f;::‘::::’;::m ' 4 hours ) tor the tst time usage. Afterwards, it any runner cattery
'{Pmdu :1 mm“ ‘ ‘ 2 rechargeable, it takes only around 2 hours, The battery
{Mam mm") . 2 rechargeable way, pls re-oheck the deiails description or user
[Accessories] , a manual
tinteiiaticnl , 4 . The manual or pairing or Blueiooih device, pls re-checti lhe
{EL-«om & appearance] 5 user manual or each indrvtdual bluetooth product The
a [Rigginfm- 5; username onellnk is “Zeilnk 2.0 . wnile pairing to Cell phone
.{Rachlrglng} _' _ 6 bluetooth or other pluetooth device, please select “Z-Ilnk 2,0 “ a
._ “I“ 2.0 mm "mm“ _ 5 lhen install the password [noon] in ordertc link correctly
mm.“ an} . a . Buttons operation on Link Bluetooih =
{turning ctr} . e (1) snort press: press the button in a second then release.
{Volume adiuslmenll . » 6 (2) Long press: press the button within certain period then
{Pfilnng of Hand!“ made} ; [$6856.
, 9
NOTE : nme to press the buttons, it's dillererit delinition lor
Zellnk operation. Depends on dilterent types or cell
phones brands. II may occur some Functions cannot be
pertorrned in some and cns
Warning : Tc mount ttie z-Link device inside or helmet is not
waterprootarid in order not to damage the system, pls
do not moisturize the interior including inner lining. ll
{wniie music playing, GPs nahgaiing or radio iialening} to the interior is weli pls remove the Z-Lmk 2,0 battery
{while answering mobiln} i4 and dry the deVice & inne' llnlna
{While enawenno intercom} . , . , i4 Warning : Regarding the whole operation or Z-llnk 2 o bluetocth
{While answer-"9 Intercom . AZDPJ - - - 14 set up or oonneclion, it must be operated as stop riding.
{writle mobile callr A2DP} .i4
While riding, pls don't operate the Zellnk 2 0 process
y, $23,122:?“ W'M'e WM 1: Warning . Pls do not take apart, re-edit or modify any
7 sum,“ "we...“ , ,5 components at Limit 2 n devrce and correctly follow
3 z- llnk 2. 0 SUMMARY DIAGRAM OF COMMANDS 15 “P "'3 Operation of User manual.
Zriink 2 0 manual Warning |nfurmationr21112711726.po (1606 x 2496 x 24)
:Adjust the suitable volume. High volume might cause
the hearing damage
Warning : While recharging. pls use the Z-link 2.0'5 battery
charger to avoid any system damage. The treatment
oi junk battery, pls comply with the countrys local
regulation.
roduct Ro d Map
[Product Features]
, Conform to Bluetaoth 2.1 + EDR standard.
, Adopt advanced tech. to eliminate echo and show high sound
quality as HirFi stereo.
- Communication time can reach 12 hrs and stand by time can
uplo 300 hrs ( depends on different usage condition ).
, Include battery charger.
, Operation range can be upto 150 meters ( depends on different
usage environment ).
, Built-in FM and RDS system
7 Consumer oould update soitware via omnial website
A Compauable to Bluetooth walkie talkie.
[Main iunctlons}
(Cell Phone)
1. Answer phone call.
2. Voice dialing (cell phone should have this function).
3. Redial the last phone number.
4. Refuse the call or discontinue.
(Intercom)
i. With another Z-link 2.0 bluetcoth device to proceed Intercom
system with other bike or the Intercom between driven!‘
passenger.
2. One touch to answer the Intercom.
3 Sound reminderror an incoming phone call
(GPS voice connection)
1. Connect with GPS voice navigator connection thru. Z—link 2,0
Bluelooth device (Voice navigator to Bluetooth headset
required).
2. Sound reminderfor an Incoming phone call.
(Hi Fi Stereo)
1. Supportthe hi-fi stereo orAZDP.
2. SupportAVRCP ( Remote control oi music display. Music
searching back and forth. Bluetooth device should support
this function ).
3. Sound reminderfor an incoming phone call.
(FM 1- RDS radio)
1. Search signal automatically and save 6 channel.
2 RDS system support
3. Manual channel switching and personal prelerence momery.
4. Sound reminderfor an incoming phone call.
(Walkle talkie)
1. Receiving Walkle talkie signal.
2. Sound reminderfor an incoming phone call.
[Accessories]
1. Bluetooth devics‘i set:
Cheek pad‘lset I housing‘iset / silicone keypad*1 pcs /
battary‘1 pes/FCBA'l pcs / MIC& Speaker‘isot
2. Recharger‘ipcs
3. USE cable't pcs
[Installaticnl
(Installation ofblue tooth device»
1. Remove the left 5 right side cheek pad irom helmet.
2. Take on the front buckles oi liner (tor settling right ear set).
3. To stick the Velcro on recess at left a right PU or EPS pad,
particularly to PU pad could strengthen adhesive iorce by
Cyanoacrylaies.
4. Put chin straps through cheek pad.
5. Put leii is right ear set in the cave on EPS or PU cheek pad
and set it with Velcro.
6. Adjust PCB antenna and turn the green side outward.(the
direction of antenna will influence intercom connecting
distance.)
7. Buckle the button of left cheek pad (Please check it the ear
set cable win be pressed by the button Deters buckle it That
might damage the ear set cable.)
8. Insert the locating plate of cheek pad into the gap between
EFS and rubber trim and settle the cheek pad.
9. Put the liner back on position.
(Liners cleaning)
1. Loosen the zipperoi left cheek pad.
2. Loosen the screws oi blue tooth case.
3. Take on the cover of ZLINK 2.0
4. Take the ZLINK 2.0 device out irom the case.
(Reinstallalion)
1. Bend both side of pad oi blue tooth device.
2. Inserl blue too“! device.
3. Put back the top coveriasteh the screws.
4. Seal the Zipper.
5. Installation please reierto (Installation of blue tooth
device)
[Buttons 8. appearance}
: Main Function Button
' v+ (long press to volume up/Short press to FFi
2 v. i’ long press to volume down/short press to new
‘ FM button
: Mini USBjack
. Water proof cover
(Status of LED}
15!.—
1. Stand by a.
unconnected
2. Connection
3. Blue tooth Pairing
4. Turn on the device
5. Turn cit the device
Blue flash once every 3 seconds
Blue flash once every 5 seconds
Red/Blue flash alternately
Blue flash for 1 second
Rad flash for isecond
Showing battery status afler power
on device :
ii >50%, flash BLUE for 1 second;
it 50%~1D%, llash both RED I BLUE
lor 1 second:
it (10%, flash RED for one second
Constant Blue and Red flash
Constant Blue
Both Red / Blue on
a. Battery Level
7. Recharge
3. Completion of
rechargeable battery
9. Reseting
[Recharging]
Beiore using Z-Link, battery should be lully recharged, about 4
hours , for the 1st recharge. Alterwards, if any further battery
rechargeable, it takes only around 2 hours
Full battery power, the communication can reach 12 hrs and
stand by up to 300 hrs. (it depends on the usage condition and
environment).
Rechargeable way, pls kindly follow up the steps below:
1, Link the battery charger with Z-link 2.0 Mini USB,
2. When battery charger ls on, the Zsllnk Z 0 LED wlll show the
Constant Blue and Red flash till full recharge the battery, then
the LED will turn to Blue light and Red off. Pls switch 01 the
battery charger as the battery is iully recharged
NOTE: Inside of Z—llnk pack, a set at battery charger with mini
USB plug is contained.
4 k2. Ba cFum: uns
[Turning on}
Long press MFB button around 5 seconds, The speaker will
sound a beep and the blue LED will begin light up for around 1
second; then Z-link 2.0 will enter stand-by mode, the LED wlll
flash every 3 seconds.
[Turning of”
Long press and the MFB button The speaker will sound a long
beep and the LED will flash red ior1 second then oil.
[Volume adjustment]
1. Volume up: vt button
volume then release.
2, Volume down. v- buttonGlong pressing till the acceptable
long pressing till the acceptable
volume then release.
NOTE: Short press v+ button under AZDP Interface ls for
forward track. short press v» button Gis to revvlnd track.
[Pairing or Handset modal
Before proceeding pair segment, pls review carefully the pairing
operatlon tips in the user manual at cell phones Bluetooth and
re-check iicell phone did support the Bluetooth interface at HSP
(Handset Prone ) or HFP ( Hand Free Profile l-
1. Turn on the pluetooth mobile phone.
2. Turn on the palrlng oi Z-link: in the condition of power off
status, long press the MFBQ abouts seconds till the status
ornashing Red light at Blue light alternately. Then get into the
pairing with cell phone.
3. To operate the pair/ link prooess. pls rollovv up the user
manual or Bluetooth cell phone. However, upon the Bluetooth
cell phone enters to searching the Bluetooth device, will find
out [Z—llnk v2.0] in the list. Then pls input the password [0000]
and complete the pairing.
4. If the pair] link process is successiully. then the LED will turn
to sparkling Blue light.
NOTE: - If the pair l link process between cell phone 8t headset
is successful, its not necessary to pair again
alterwards, While turning on the Z-link again, pls
conilrm the mobile link correctly to Z-llnk.
— If the whole process over 2 minutes and Keep glittering
Red I Blue light, it means the Bluetooth pairing is not
successfully and it requires to repeat the steps or 1. 2.
a 3. till complete pairing,
[Operation or Handset mode]
1. (Answering the phone earl/Ending the phone earl)
hone call. Z-link will ring Short pressing
MFB. to a er phone call. Another short pressing on
MFB buttonD will end up the phone call,
NOTE: If you answer phone call whlls listening muslc, music will
keep playing as soon as the call ended up.
2. (Refusing a! phone call)
Long press MFB button @ior 2 seconds. Z—llrtk wlll sound
beep and reiuse phone callt
3. (Radial)
Successive 2 short pressing on MFBvaill redial the last
call out number.
NOTE: The gap between 2 pressing cannot be too long.
4. (Initiating the voice dialing)
Suocessive 3 short pressing on MFB E) , voice dialing will be
activate, input voice signals to call. Z—link will beep While
calling.
NOTE: The gap between 3 pressing cannot be too long.
Mobile is required to support voice dialing runotion.
[Pairing or intercom mode]
Z-link 2.0 can be used as an intercom by pairing with another
Zvlink 2 0 device for the communication between rider and rider
or rider to passenger Before using Intercom system. blue tooth
devices must be paired. The steps of pairing as below:
1.Tum on 2 sets of Z-link 2.0 by long press on the MFBl
5 seconds, then will hear a sound of [beep] and LED WI | glitter
Blue light.
2. Press v+ and v-Gabout 5 seconds until LED glitter Red
and Blue g tto activate intercom paring mode.
3. Short press the MFBE) or any one or these 2 Z-link 2.0 device
to complete pairing. lf the palring ls successful, Z-llnk 2.0 will
sound 2 or3 reminder ring and these 2 devices can contact
with each other.
NOTE: - ll pairing is successful, the LED will be sparkling Blue
light.
- llr the process takes more than 2 minutes and the LED
is glittering Red and Blue, the pairing is tall, pls redothe
stpe 1. 2 and 3 until the devices matched.
- Once the devices have been paired. it‘s not necessary
to proceed pairing again afterward unless users want to
palr with another Zsllnk 2.0. The palnng memory will be
activate as the devices turning on.
[Operation or intercom model
1. (End uplntercom)
Short press MF , both master and slave device wlll hear
“beep" sound, the conversation ended up.
2. (Irrltlate Intercom)
Long press MFBQror about a second, device will hear
reminder nng sound, then conversation initiated.
[Pa fly or Azop mode]
The Z-link 2.0 is designed to reoelve stereo music from
AZDP (Advanced Audio Distribution Profile) sources and
mobile phones that support the Bluetooth AZDF and AVRCP
profiles. Using a Bluetcotlt device that supports AVRCF
profile will allow you to operate AZDP source lunctlons
directly [rent your Z-link 1.“ device.
1. Turn on MP3player orAZDP transmission.
2. To skirt Z—link pairing: With the Z4ink turned off. press and
hold the MFE for about 8 second until the LED twinkling
blue and red, n A2DP is stand by for pairing.
3. Accomplish pairing per your MP3 player orAZDF device's
instructions. The MP3 player nrAZDP device will list
{z-link 2.0] as a found device. Select it and rollcw your
MP3 Player's instructions to accomplish the pairing. input
PIN code “0000” to activate pairing.
4. It pairing succeeds. Z-link 2.0 LED will twinkle successwely
bluet
NOTE = - lt yourAZDP devioe is built ln your mobile, please reler
to {Pairing of Handset model .
- ii the pairing process takes more than 2 minutes and
the LED keeps twinkling blue and red, please re—do the
step 1. z a 3 until the palnng succeeds.
[The operation or AZDP mode]
1. (PLAY/PAUSE)
Short press MFB button
2. (Forward)
Short press v+ E) .
3. (Rewind)
Short press v- (-3.
NOTE: In order to operate the function above, your device
should be compatible with Bluetooth AVRCP profile.
[Pairing to GPS device]
To unable Bluitooth GPS device with Z-tink 2.0. you must
tlrst pair the two devices. This will allow your GPS to
transmit navigation instructions and audio to the speakers
or your headset.
1. Turn on your GPS.
2. With the Z-Iink turned off, long press the MFB button
for about 8 seconds until the RED and BLUE Lights begin
alternating rapidly.
3. Search for Bluetooth headsets on your GPS device by
following the dOViCD'S instructions. Th. GPS device will
list {Z-Ilnk 2.0] as a round device. Select It and follow
your GPS device’s instructions to I ate the pairing. If
your GPS device requires tor a PIN please enter “0000".
4. Once Pa ing is complete, your GPS device may confirm
that pairing has succeeded. and Ills Z-link will begin
flashing slowly In blue.
NOTE 1 . Not all Eluetooth enabled GPS device allow
connections to Bluewoth headsets, the GPS device
must be compatible with the Bluetooth rhundatree
gateway protocolJ .
. GPS devices of different brands might have
dinercnt pairing moded. Please the my works
better with your Bluetoolh device.
Connected mode Xi Mobil 4v GPS 47 Zlink
(Mobile pairs to GPS than GF‘S pair to Z—link2,0)
Connected mode X2 Mobil 4' Zlink .7 GPS
[Mobile pairs to Z-link2.0 then Zlink pair to GPS)
It Connected mode X 1 works better with your device.
please refer to the method or your GPS
If Connected mode #2 is better, please operate
according to Z-Iink2.t't manual.
- some Bluetooth GPS devices support MP3 but the
MP3 needs to turn on again manually after phone
call.
» If the pairing process takes more than 2 minutes and
the LED keeps twinkling blue and red, please re-do the
step 1. 2 E 3 until the pairing succeeds.
[The Operation or PM a RDS model
1. (FM Tum on /Tum at?)
Long press FM button @ior 5 seconds. some prompt sound
will be hear lrom ear set.
2. (Switch channel)
Short press FM button @ to switch channel. 6 channels can
be stored in memory.
3. (Search and store new radio channel)
(1) Short press FM button @to the channel that you want to
cover.
(2) Long press FM button @2 second. the device will search ror
new channel automeflcally and you could hear the radio in the
ear set, it it‘s not the channel you want. Long press FM button
@2 second again until you find the channel you want.
(a) Short press FM button @ within 20 seconds. the new channel
will be stored,
4. (R05 ON/OFF)
RDS default setting is OFF, short press FM button @ twice
to enable RDS. to switch ofi RDS. just another twice FM
button. Prompt sound will be heard from ear set.
NOTE: -You need to short press “FM button ® “ for
confirming and storing the station, even this dovicn
can auto scan the stronger signal 6 stations on the
first usage.
and Blue allemataly. then pairing begins.
3. Please refer to pairing method in WatkierTalkie user manual,
4. Once the pairing succeeds, Z-Iink 2.0 Will tlash blue slowly.
NOTE: - Once the Walkie-Talkie deVioe has been paired with
Z~|ink 2.0, user doesn’t have m pair it again. the devices
will link automatically as turning on.
. lithe pairing process takes more than 2 minutes and
the LED keeps twinkling blue and red. please re-do the
step 1. 2 a 3 until the pairing succeeds
[The Operation UfWalkie Talkie mode}
1. (Sending)
Please refer to PTT operation method in Walkie-Talkie user
manual.
2. (Answering)
Auto
5 Ink 0 advanced lunctlon operating
[While music playing, GPS navigating or radio listening}
1. (Answering mobile)
Music (or navigator) will stop and sound ring tone. Short
press MFE®tc answer phone call Another short press on
MFB @will end up phone call,
2. (Redlal last call)
Short press MFB® twice, music (or navigator) will stop and
sound ring tone, after end up the call, music (or navigator)
will activate automatically.
3. (Answering intercom)
Music (or navigator) will stop and sound warning sound
ibeep beepl . the call will start automatically, after end up
the call, music (or navigator) will act automatically.
4. (Initiating Intercom)
Long press MFB [2) about 2 seconds, music (or navigator)
will stop and sound warning sound the call will start
automatically, afler end up the call. music (or navigator) will
replay automatically.
[While anlworing mohile]
1. (Answer 2"" phone cell)
Ring tonewill sound as receiving phone call. short press MFB
D to hang up the first call,another short press MFBD to
answer the semnd call.
2. (Answer Intercom)
Ring tone will sound as receiving intercom call. short press
MFBDto hang up the mobile call, Intercom will start
automatically.
Iwnu- answering intercom}
(Answer moblle)
wnen prompt sounds, short MFB IZch end up intercom, short
press MFB Dto answer mobile call.
[While answering intercom +A2DF)
(Answer mobile)
When prompt sounds, short MFBD to end up intercom, short
press MFBDto answer mobile call. when the call ended up,
music will be back to play automatically.
[While mobik calleZDP]
1. (Answer Moblle calf)
When prompt sounds, shalt MFBD to end up intercom.
short press MFBIZ) to answer mobile all When the call
8 k 2 0 SUMMARY DIAGRAM 0F COMMANDS
Mode Function
'isitrisn’
on on
oil Blue flashing
Hui: 0 ration
p. Volume up
ended up, music will be back to play automatically.
2. (Answer Intercom)
When pmmpt sounds, short MFEE) to end up mobile call,
intercom will start automatically. when the call ended up,
music will be back to play automatically.
[While answering Walkle Talkie]
3. (Answer Mobile call)
When prompt sounds, short MFBD to end up intercom,
short press MFBD to answer mobile call. When the call
ended up. Z-link 2.0 will be back to walkie talkie
autumatlwlly.
4. (Answerlntorcom)
When prompt sounds, short MFBD to end up mobile call,
Intercom will start automatically. when the call ended up.
Z—link 2.0 will be back to walkie talkie automatically,
6. Defaul setting
1. As Z-link 2 0 oil. Long press MFE [23w Band v- Gtogstiter
around 5 seconds until Red and Blue LED light up solidly, then
default selling completes.
2. This operation is irreversible, once the process completed. all
settings and pairings have to be redone.
7. Software update
1. Zrllnk 2.0 uses pmper USB cable, please don't try it With
normal USB cable.
2, You could also study the operation and syslem request via our
olflcial web-site: www.2eus-helmeta.ooln
3. For updating software otyour Z— lnk2.D. you could also find the
latest version or the version you need on our official website:
Wm
owning
Long fifiimieng P
‘ Volume down
Falling mode
Answer call
End up
Dom/M cull
Radial
Von. dialing
Pulitg mode
call
Mobil. mode
Intercom mode
and a blue flashing
Ring tons
Ring tone
Red A blue liming
End up osilint:
Initiate inisrenm
Pulling mode
PLAV l pause
fr
out:
Warning sound
new
oN iorr
switoi channel
seam channel
Wamlng sound
stunt charm-t
Ros ONIOFF
Puma
Renewing
' Almrpharwcall
UnderItIN orGF'S Rodin]
nudln navigation Receiving Intercom
nlllau lntermm
Wilkle rat a mod-
Waming sound
Auto
Dial sound
Auto
Beep
Answer 2"‘ phone call
wttlle culling
Allwm‘ inn-room
Answer nubile
Answer mob“!
Whlla Intercom
Auto
wnlltt walkle alitlo
Dllault setting
Answginisrmm
pursuit setting
Solid blue a red
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2012:12:21 09:17:19-08:00 Create Date : 2012:11:27 11:43:30+08:00 Metadata Date : 2012:12:21 09:17:19-08:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : SlowView prints C:\Documents and Settings\Jill.Chen\Local Settings\Temporary Internet Files\OLK8\Z-link 2 0 manual Warning Info Creator : jill.chen Document ID : uuid:92264dfe-f96e-4917-b033-3b83f2089a5a Instance ID : uuid:00021b1d-9333-454a-a090-7ed736850921 Producer : Acrobat Distiller 7.0.5 (Windows) Page Count : 5 Author : jill.chenEXIF Metadata provided by EXIF.tools