Garmin Canada HRM2 LOW POWER COMMUNICATIONS TRANSMITTER User Manual

DynaStream Innovations Inc. LOW POWER COMMUNICATIONS TRANSMITTER Users Manual

Users Manual

miCoach Pacer USER MANUAL Please note: this is a DRAFT of the miCoach Pacer user manual.All designs and images are work in progress and subject to change!
miCoach Pacer Bundle
PRODUCT DESCRIPTION- Real time audible coaching based on physiological data receivedfrom the miCoach Heart Rate Monitor and miCoach Stride Sensor- Stores planned personalised workouts and recorded data for each- Web Synchronizer function allows personalised workouts to be downloaded from miCoach.com- All recorded data can be uploaded to miCoach.com for detailed analysis - MP3 Player compatibility- The miCoach Pacer is a wireless receiving device that provides real time coaching for runners of all ability levels- Connects to any PC or MAC with access to the internet to upload workout data and download additional workouts- Attaches to clothing via a clip on the back of the unit.- Small, lightweight, and rechargeable- Keeps track of users performance parameters, such as heart rate, pace, and total distance - Interfaces with the miCoach website, providing an easy and intuitive interface for workout uploads, performance evaluations based on data downloads, and preference settings
Slide Switch Located on top of the unit, this switch selects between the 3 modes of operation: Off, Free and miCoach. During the workout, the Free switch also is a mute option.Select Button Located on top of the unit, this button selects one of the workouts stored on the device.Running Man Located on the front left of the unit; this button starts and pauses the selected workout.Info Button Located in the middle on the unit. This button gives the user an immediate update of up to 8 selectable performance measurements.Volume Button Located on the front right of the unit. This button controls the coaching volume the device will output to the headphones.This functionality does not control external device volume.Pacer Functionality•Are there recommended locations where the Pacer should be worn for comfort, accessibility, and RF performance?
Workout with Pacer – miCoach mode----•Picture How to pause or end a work-out?User presses the start button
Workout with Pacer – FREE modeThere is also the possibility to use the miCoach Pacer as a data logging device. Simply set the Pacer to „free“ and together with the Heart Rate Monitor and Stride Sensor, tracks your Heart Rate, Speed and DistanceData and gives you updates regarding Pacer/Calories burned on demand.•Picture How to pause or end a work-out?User presses the start button
Workout with Pacer – FEEDBACK INDICATORS-Solid Green means connected to HRM and SDM-Solid Red means lost connection to HRM and SDM-Flashing Red means searching for HRM and SDM-Flashing Green means paused-Blue means connected to computer-Power Button flashing Red means low battery-Flashing Blue/Red/Blue/Red means charging-Flashing Blue/Green/Blue/Green means fully charged
Workout with Pacer – SMART OFF Example:All collected data will be saved automatically when switching off the device
Workout with Pacer – INTERACTION PC ConnectionThe Pacer unit connects to a PC or MAC via the included USB cable. Users connect to the miCoach website to upload workout statistics, download new workouts, and receive software updates. Data is loaded on and off the unit via the USB Mass Storage Class Protocols. The USB connection recharges the lithium battery.Interaction / Communication: miCoach.com – ProductThe user is required to install a single desktop application which will be able to then identify and communicate with miCoach supported hardware devices. The sychroniser location site is found at : www.micoach.com/start/softwaredownloadsFull bi-directional synchronization of sport data (including training plans, workout results, user profile and settings) via USB cableThe USB connection cable provided can be used to synchronize (Up-/Download) workout information withmiCoach.com and at the same time charges the battery of the Pacer device.
HRMPower On: RF transmission automatically activates when heart rate monitor is clipped on to a compatible strap and is fastened around chest.Power Off: HRM automatically stops transmitting and returns to ultra-low power mode two minutes after removal of the body.HEART RATE MONITOR+=
SDMPower On/Off: The SDM is always on and transmits your workout data when you exercise.Operational CharacteristicsShoe Attachment: The SDM is attached securely to the laces of any running shoe using the supplied clip, or inserted into the mid-sole cavity of 80 % of adidas running shoe range in 2010.STRIDE SENSOR•On the Stride Sensor page, it would be good to clearly indicate which direction of the SDM is facing forward (users will always ask that question), and that the SDM goes in with the miCoach logo facing up when installed in-shoe. It’s also worth stressing that the SDM should be secured well when used on the laces to get best accuracy and so it does not slip out while running.
CALIBRATION OF STRIDE SENSORStride sensor calibrationThe accuracy of the stride sensor will be >95% accuracy “out of the box” for a majority of users. Some users with certain stride characteristics may experience lower accuracy but this will improve once a simple calibration procedure is performed. The SDM provides >98% accuracy after calibration.Additional calibration can be done on miCoach.com.
BATTERY INFO - PACERPacerNon detachable rechargeable 125mAh lithium polymer batteryBattery and powerCharging via USBBattery charged in 2 hours
BATTERY INFO – HEART RATE MONITORHeart Rate MonitorReplaceable CR2032 lithium coin cell batteryOpen 4 screws of the back plate The Heart Rate Monitor does not need to be re-paired after battery replacement.
BATTERY INFO – STRIDE SENSORStride SensorReplaceable CR2032 lithium coin cellbatteryTwist and turn the back plate Simply push down and twist the back plate to open the SDM (see red arrow)The stride sensor does not need to be re-paired after battery replacement.
PAIRING HEART RATE MONITOR and PACER Every device in the pacer bundle is already paired. The Heart Rate Monitor in the Pacer Bundle is pre-paired with the pacer device.The HRM must be “paired” with an ANT+™ enabled receiver device such as miCoach Pacer.Repairing ProcessPressing & holding the center and workout button at the same time while Pacer is off (TBD)•Notes on pairing: The HRM must be active in order to pair it to the Pacer – instruct users to put it on the chest to activate it. The SDM is always active. Mark can confirm, but I presume both sensors must be paired at the same time (if only one sensor is present and active, only it will be paired?).
PAIRING STRIDE SENSOR and PACER Every device in the pacer bundle is already paired. The Heart Rate Monitor in the Pacer Bundle is pre-paired with the pacer device. The SDM must be “paired” with an ANT+™ enabled receiver device such as miCoach Pacer.Repairing ProcessPressing & holding the center and workout button at the same time while Pacer is off (TBD)•Notes on pairing: The HRM must be active in order to pair it to the Pacer – instruct users to put it on the chest to activate it. The SDM is always active. Mark can confirm, but I presume both sensors must be paired at the same time (if only one sensor is present and active, only it will be paired?).
Pacer – CONSUMER JOURNEY – Prior to workout1234Connect your miCoach Pacer to your MAC or PC and download your Personalized workouts.
Pacer – CONSUMER JOURNEY – get ready for workoutOption 1Option 2SDMHRMOption 1Option 2SDM and HRM are sending accuarte data to miCoach Pacer via 2.4 GHZ
Pacer – CONSUMER JOURNEY – After the workout12
General SpecificationsSize: 56 mm x 41 mm x 16.75 mmWeight: 22.9gAttachment Method: Clips to workout apparel or MP3 holder via clip on back of unitUser Interface: 4 buttons (3 front, one top), 1 Slide switch (top)Audio Interface: 1/8” stereo headphone jacks (TRS connector)Power: Rechargeable 125mAh lithium polymer batteryBattery Life: 10 hours on before rechargingSensor Communication link: ANT+TM protocol to HRM and SDMRF Frequency: 2.4GHZSensor Com. Range: >2.5 m Data Received: Averaged BPM, and stride rate data from ANT+TM transmitterPC Connection: 1/8” TRS to USB series “A” connection (cord included)Operating temperature: -15 to 40 CNon operating temperature: <-18 or >45CRelative humidity: 10 – 85 % non condensingMaximum operating altitude: TBDBattery and powerCharging via USBBattery charged in 2 hoursTECHNICAL SPECIFICATION MICOACH PACERNote - Consumer Facing info: be a bit more selective on what needs to go into technical specs in the user doc.
HRM Module General SpecificationsRef Size: 63 mm (L) x 38 mm (W) x 10.5 mm (H)Weight: 19.5 g (no strap)User-interface: Auto on/offPower: user-replaceable CR2032 lithium batteryBattery life: >1.000 hours active life (2.8 years @ 1 hr/day usage at 20oC)Communication link: ANT+™ protocolRF frequency: 2.4 GHzCommunication Range: > 2.5 m Water Resistance : 1m *The adidas HRM is not designed to treat or diagnose any medical condition TECHNICAL SPECIFICATION MICOACH HRMNote - Consumer Facing info: be a bit more selective on what needs to go into technical specs in the user doc.
General SpecificationsRef In-Shoe Size: 34 mm (L) x 23 mm (W) x 8 mm (H)Total In-Shoe Weight: <8 g (including battery)Ref Size with Shoe Clip: 45 mm (L) x 29 mm (W) x 13 mm (H)Total Weight with Clip: <9 g (including battery)Foot Pod Attachment Method: Attached to shoe using patented one-piece clip.User-interface: Always-on (no buttons or LED)Power: user-replaceable CR2032 lithium batteryBattery life: >6 months (at 20oC) extreme cold can effect battery life Battery low power indication 1 month prior Communication link: ANT+™ protocolRF frequency: 2.4 GHz (unable to transmit in water environment) Communication Range: > 2.5 m (dependent on receiver)Message Rate: 2 Hz Regulatory compliance FCC, IC, CE, ROHSSensor Technology: Dynastream patented SpeedMax technologyCalibrated speed/dist accuracy: Walk 97%, Jog 98%, Run 97%: median accuracy Uncalibrated speed/dist accuracy: Walk 95%, Jog 95%, Run 95%: median accuracy Tested Speed Range: 3.6 km/hr to 19.8 km/hr (2.2 mph to 12.3 mph)Tested Pace Range: 16:40 min/km to 3:00 min/km (26:50 min/mi to 4:50 min/mi)Instantaneous cadence accuracy: +/- 1 stride/minSensor Accuracy Range: 0oC to +40oCWater resistance: 1mTECHNICAL SPECIFICATION MICOACH SDMNote - Consumer Facing info: be a bit more selective on what needs to go into technical specs in the user doc.
Product SummaryTextile Transmitter Strap is a soft, flexible strap that is worn around the chest and must be used in conjunction with the HRM device to collect accurate heart rate data. General SpecificationsConstruction: Seamless press and bond designFabric Material: EUROJERSEY Sensitive fabric. PA and EA composition. BlackElectrode: Proprietary conductive materialSnap Life Expectancy: At least 800 snap on/off cyclesSnap Material: Stainless SteelWashing: Hand rinse at 30 degrees Celsius. Sustains at least 30 rinses.Weight: approximately 50gSizing: One size, adjustable: 580-840mm +/10mm (Medium – XL) Torso size 29 – 39 inchesTECHNICAL SPEC MICOACH TEXTILE TRANSMITTER STRAPNote - Consumer Facing info: be a bit more selective on what needs to go into technical specs in the user doc.
STATEMENTSFCC"Note: This equipment has been tested and found to comply with the limits for a Class B digital devicepursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one of the following measures:* Reorient or relocate the receiving antenna* Increase the separation between the equipment and receiver* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected* Consult the dealer or an experienced radio/TV technician for help""This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.““Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment”.“This product does not contain any user-serviceable parts. Repairs should only be made by an authorized adidas miCoachcenter. Unauthorized repairs or modififififications could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations.”Canadian ConformityThis Category II radio-communication device complies with Industry Canada Standard RSS-310.Ce dispositif de radio-communication de catégorie II respecte la norme CNR-310 d'IndustrieCanada.miCoach
WARRANTY INFORMATIONTBD.
TIPS & TROUBLESHOOTINGTBD.
SERVICE & SUPPORTTBD.
SAVETY & CLEANINGTBD.
2009

Navigation menu