Garmin 00610 MARINE RADAR TRANSMITTER User Manual USERS MANUAL
Garmin International Inc MARINE RADAR TRANSMITTER USERS MANUAL
Garmin >
USERS MANUAL
GMR 20/40 marine radar installation and operation guide GMR 20/40 Installation and Operation Guide © Copyright 2004 Garmin Ltd. or its subsidiaries. All Rights Reserved Garmin International, Inc. 1200 East 151st Street Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 Fax 913/397.8282 Garmin Corporation No. 68, Jangshu 2nd Road Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099 re Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate Romsey, SO51 9DL, U.K. Tel. 44/1794.519944 Fax 44/1794.519222 September 2004 lim Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual or revision must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Web site address: www.garmin.com GARMIN® is a registered trademarks of Garmin Ltd. or its subsidiaries and may not be used without the express permission of Garmin. . Part Number 190-00457-02 Rev. A Printed in Taiwan ar in GMR 20/40 Installation and Operation Guide Welcome Thank you for choosing the Garmin GMR 20/40. The GMR 20/40 utilizes the performance of Garmin radar and provides overlay and color information when combined with a marine Multi-Function Display (MFD). Please take a moment now to compare the contents of this package with the packing list on page x of this manual. If any pieces are missing, please contact your Garmin dealer immediately. About This Manual ual ua lim re To get the most out ut of yo your you nnew navigation system, take time to read this manual and learn the operating procedures for your unit in detail. Customer Service ervice Produ Product duct Re Regist Registration Help us better support ort rt you yo byy comp compl ccompleting our on-line registration today! Have the serial number mber of your ourr GMR G 220 GM 20/40 ha hhandy and connect to our Web site (www.garmin.com). Look for the Product Registration link on the Home page. e. Also, o, be sure ttoo recordd yyour serial number in the area provided on this page. ar in Serial Number Use this area to record the serial number (8-digit number located in the he back ckk of the th unit) uni un ) in case c iti is lost, stolen, needs service, or if you need to contact Technical Support. Be sure to keep your original sales receipt in a safee place plac pla e or attach a photocopy phot inside the manual. Serial Number: The Garmin GMR 20/40 has no user-serviceable parts. Should you ever encounter nter a problem with your unit, please take it to an authorized Garmin dealer or contact Garmin Customer Service for repairs. GMR 20/40 Installation and Operation Guide Table of Contents ar in lim re GMR 20/40 Installation and Operation Guide ar in lim re Warning and Cautions autions CAUTION: Use thee GMR 20/40 0/40 at you your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this Owner’s Manual, and thoroughly ough ugh practice ractice oop operat operation using the simulator mode prior to actual use. When in actual use, carefully compare indications from the GMR 20/40 40 to alll available ilable labl nnavigat navigation gati atitio sources, including the information from other NAVAIDs, visual sightings, charts, etc. For safety, always resolve any discrepancies continuing navigation. repancies epancies bbefore efore fore co con cont CAUTION: IT IS THE USER’S RESPONSIBILITY SPONSIBILITY BILITY TO O USE U E TTHIS PRODUCT PRUDENTLY. THIS PRODUCT IS INTENDED TO BE USED ONLY AS A NAVIGATIONAL AID AND MUSTT N NOT OTT BE U USED SED ED FOR ANY PURPOSE REQUIRING PRECISE MEASUREMENT OF DIRECTION, DISTANCE, LOCATION, OR TOPOGRAPHY. RAPHY. HY HY. WARNING: This product, its packaging, and its components omponents mponents conta contai contain ch chemicals known to the State of California to cause cancer, birth rovided edd in accordan accordance with w California’s Proposition 65. If you have any questions or defects, or reproductive harm. This Notice is being provided would like additional information, please refer to our webb site att http:/ http:// http://www.garmin http://www.garmin.com/prop65.\ www. www.g w gar ga WARNING: The radar scanner transmits electromagnetic energy. ergy. Ensure nsure sure that thatt the scanner scanne ssc has been installed according to the recommendations given in this guide, and that all personnel are clear of the scanner, before fore switching tching ching to transmit trans mode. Installation Guidelines The guidelines given here describe the conditions for optimum EMC performance, erformance, mance, nce, ce, bbut it iss re recogn recognized that it may not be possible to meet all of these conditions in all situations. To ensure the best possible conditions ns forr EMC performan performa performanc,e w within the constraints imposed by any location, always ensure the maximum separation possible between different items tems off electrical equ eequipme equipment. For optimum EMC performance, it is recommended that wherever possible: • IEC 60936-1 clause 3-27.1 maximum distances from the antenna at which RF (Radioo Frequency) requency) levels evels ccan be expected. GMR20 (100W/m squared = 40cm [15.75”]) (10W/m squared = 120cm [47.24”]) GMR40 (100W/m squared = 60cm [23.62”]) (10W/m squared = 175cm [68.90”]) • Mount at least 1 m (3 ft) from any equipment transmitting or cables carrying radio signals e.g. VHF radios, cables and antennas. In the case of SSB radios, the distance should be increased to 2 m (7 ft). • Mount other electronics and cables more than 2 m (7 ft) from the path of a radar beam. A radar beam can normally be assumed to spread 20 degrees above and below the radiating element. • Electromagnetic Energy. The radar scanner transmits electromagnetic energy. It is important that the radar is turned off and/or DC power input be disconnected whenever personnel are required to come close to the scanner to perform work on the scanner assembly or associated equipment. • It is recommended that the radar scanner is mounted out of range of personnel (above head height). Do not look directly at the antenna at close range as your eyes are the most sensitive part of the body to electromagnetic energy. When properly installed and operated, the use of this radar will conform to the requirements of ANSI/IEEE C95.1-1992 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields. • Magnetic compass: Mount the scanner unit at least x (TBD) m away from a magnetic compass. GMR 20/40 Installation and Operation Guide FCC Compliance The GMR 20/40 complies with Parts 15 and 80 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to provide more reasonable protection against harmful interference in a residential installation, and are more stringent than “outdoor” requirements. Operation of this device is subject ubje to FCC part 15 to the following conditions: (1) This device may not cause harmful interference, and (2) this ubj device must accept any interference nterference nterferenc fere received, including interference that may cause undesired operation. ar in lim re This equipment generates, erates, rates, uses an and ccan radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference erference rence ence to radio ccommu communications. However, there is no guarantee that interference will not occur in a particular installaent does causee harmfu harmful inte tion. If this equipment interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged ouraged to try to cor co correct th the interference by one of the following measures: • Reorient or relocate the he receiving i g antenna. enn enna • Increase the separation between tween thee equ equipm equipment quip t and quip annd the receiver. • Connect the equipment into ann outlet tlet let on a circuit diff different iffere ffer fere from that to which the receiver is connected. • Consult the dealer or an experienced ced radio/TV dio/TV io/TV technic technician echni i fo for help. The GMR 20/40 does not contain any user-serviceable should only be made by an authorized Garmin service center. Unauthorerviceable eable able pparts. arts. Repa Repairs sh ized repairs or modifications could result in permanent manent ntt damage to th the equ equipment, and void your warranty and your authority to operate this device under Part 15 and 80 regulations. GMR 20/40 Installation and Operation Guide Packing List Before installing and getting started with your unit, please check to see that your package includes the following items. If any parts are missing, please contact your Garmin dealer immediately. ar in lim re Standard Package: • GMR 20 or 40 Uni Unit nit • Power Cablee • Marine Network work Cable • Owner’s Manual anu • Installation/Operationn Manual • Mount Kit Hardware • Grommet for Marine Cable GMR 20/40 Installation and Operation Guide ar in lim re GUIDE DE TEXT TE TE EXT XT GMR 20/40 Installation and Operation Guide lim re ar in GUIDE TEXT GMR 20/40 Installation and Operation Guide Software License Agreement BY USING THE GMR 20/40, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin grants you a limited ited ted license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product.. Title, tle, ow ownership rights and intellectual property rights in and to the Software remain in Garmin. ar in lim re You acknowledgee that th the he Softw Softwa Software is the property of Garmin and is protected under the United States of America copyright laws and Softwar international copyright yright htt treaties. You furthe further acknowledge that the structure, organization and code of the Software are valuable trade secrets of Garmin and that the Software inn source cod code form remains a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, e, reverse rse se engineer oor redu reduce to human readable form the Software or any part thereof or create any derivative works ee nnot to export xpor po oor rebased on the Software. Youu agree re-export the Software to any country in violation of the export control laws of the United States of America. LIMITED WARRANTY This Garmin product is warranted to be freee from defects in ma mat materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option, repair or replace lace any ny components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the he customer shall allll be b responsible for any transportation cost. This warranty does not cover failures due to abuse, misuse, accident or unauthorized horized edd alter alte alteration ation tion oor repai repairs. THE WARRANTIES AND REMEDIES CONTAINED HEREIN IN ARE REE EX EXC EXCLUSIVE LUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING WARRANTY OF MERCHANTABILITY OR FITNESS SING UNDER ANY WARR FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS YOU SPECIFIC LEGAL RIGHTS, WHICH MAY IS WARRANTY ARRANTY ANTY GIVES YO VARY FROM STATE TO STATE. IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL DAMAGES, ECIAL, L, INDIR INDIREC INDIRECT NDI O CO OR WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS IS PRODUCT ODUCT OR FR FROM DEFECTS IN THE PRODUCT. Some states do not allow the exclusion of incidental or consequential damages, so thee above not apply to you. vee limitation limitations ns m may no Garmin retains the exclusive right to repair or replace the unit or software or offer a full purchase price at its sole discretion. ull refund of the purch purc purchas SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OFF WARRANTY. WAR TY. To obtain warranty service, contact your local Garmin authorized dealer. Or call Garmin Customer omer Serv Service at one of the numbers shown below, for shipping instructions and an RMA tracking number. The unit should be securely packed wit with the tracking number clearly written on the outside of the package. The unit should then be sent, freight charges prepaid, to any Garmin warranty service station. A copy of the original sales receipt is required as the proof of purchase for warranty repairs. Products sold through online auctions are not eligible for rebates or other special offers from Garmin. Online auction confirmations are not accepted for warranty verification. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an online auction. Garmin International, Inc. 1200 East 151st Street Olathe, Kansas 66062, U.S.A. Phone: 913/397.8200 USA Only: 800/800.1020 FAX: 913/397.0836 10 Garmin (Europe) Ltd. Unit 4, The Quadrangle, Abbey Park Industrial Estate Romsey, SO51 9DL, U.K. Phone: 44/1794.519944 FAX: 44/1794.519222 www.garmin.com GMR 20/40 Installation and Operation Guide Issued: 19/04/2004 Revised: 19/04/2004 Page: 1 of 1 DECLARATION of CONFORMITY 1995/5/EC hC Conform nform nfor m is Declared: Standard to which Conformity EN 60945: 1997 Marine Navigational Equipment – General y LE ar MP in SA lim re Application pppl plication plicatio plicati on ooff Council oun nc Directive: Requirements Manufactured by: Manufacture’s Address: Authorised Representative: RMIN M N International I rnat rnatii GARMIN 1200 E. 51sstt 151 Street Str tre GARMIN Corporation No.68, Jangshu 2nd Rd., 66 66062 062 Olathe, Kansas 66062 Shijr, Taipei County, U.S.A TAIWAN, R.O.C. he Quadrang drangll GARMIN (Europe) Ltd, The Quadrangle, ey, y, Ham Ha pshire, hire, Abbey Park Ind. Estate, Romsey, Hampshire, SO51 9DL, U.K. Type of Equipment: Marine Radar Model Number(s): GMR20/40 The undersigned does hereby declare that the equipment complies to the above Directives oC Paul Morrow Quality Manager GARMIN (Europe) Ltd Date: 19th April 2004 11 y ar in lim re © 2004 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ, U.K. Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00457-02 Rev. A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2004:08:31 10:28:42-05:00 Modify Date : 2004:08:31 10:28:42-05:00 Page Count : 12 Creation Date : 2004:08:31 15:28:42Z Mod Date : 2004:08:31 15:28:42Z Producer : Acrobat Distiller 5.0.5 (Windows) Metadata Date : 2004:08:31 15:28:42ZEXIF Metadata provided by EXIF.tools