Garmin 01925 LOW POWER TRANSMITTER (2400-2483.5 MHz) User Manual 2

Garmin International Inc LOW POWER TRANSMITTER (2400-2483.5 MHz) Users Manual 2

Contents

Users Manual 2

nüvi 2405/2505 Series Owner’s Manual a nüvi® 2405/2505 series owner’s manualmodels: 2405, 2415, 2445, 2455, 2475, 2495, 2515, 2545, 2555, 2565, 2595August 2011 190-01355-00_0A Printed in Taiwan
© 2011 Garmin Ltd. or its subsidiariesAll rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Go to the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products.
nüvi 2405/2505 Series Owner’s Manual i Table of ContentsGetting Started ����������������������������������������� 1Connecting the Device to Vehicle Power ...........1About myDashboard .......................................... 2About Sleep Mode .............................................4Adjusting the Screen Brightness ....................... 4Adjusting the Volume .........................................4About Automatic Volume ...................................5Status Bar Icons ................................................ 5Satellite Signals ................................................. 6Using the On-screen Buttons ............................ 7Using the On-screen Keyboard .........................7About Shortcuts ................................................. 8Finding Locations ������������������������������������ 8About Locations ................................................. 9About Search Tools ......................................... 11Saving a Home Location ................................. 13Finding Recently Found Places ....................... 14Finding Parking ................................................ 14Saving Locations ............................................. 16Voice Command ������������������������������������� 18About Voice Commands ..................................18Navigation ���������������������������������������������� 21Starting a Route ............................................... 21Following an Automobile Route .......................22About Exit Services ......................................... 23Avoiding Road Features .................................. 24Map Pages ���������������������������������������������� 25Customizing the Map ....................................... 25Viewing Turns ..................................................26Pedestrian Routes ........................................... 29Hands-Free Phone Calls ����������������������� 30About Hands-Free Calling ...............................30Placing a Call ................................................... 32Using In-Call Options ...................................... 33Saving a Home Phone Number ....................... 34
ii nüvi 2405/2505 Series Owner’s ManualUsing the Apps �������������������������������������� 34Viewing Current Location Information .............34Using Help ....................................................... 35About ecoRoute .............................................. 35About Audiobooks ............................................38Planning a Trip .................................................40Viewing Pictures .............................................. 42Viewing Previous Routes and Destinations ..... 42Using the World Clock ....................................43Finding Your Last Parking Spot .......................43Converting Units ............................................. 43About Offers .................................................... 44Using the Language Guide .............................. 45Trafc ������������������������������������������������������ 46Disabling Trafc ...............................................46Trafc Data ...................................................... 46Trafc Receiver ...............................................47Trafc on Your Route .......................................48Trafc in Your Area ..........................................49Understanding Trafc Data ..............................49Trafc Subscriptions ........................................ 49Data Management ���������������������������������� 50File Types ........................................................50About Memory Cards ....................................... 51Transferring Files from Your Computer ........... 51Deleting Files .................................................. 52Customizing the Device ������������������������ 52Map and Vehicle Settings ................................52Navigation Settings .......................................... 53Display Settings ............................................... 54Bluetooth Settings ........................................... 55Trafc Settings .................................................56Units and Time Settings...................................56Language and Keyboard Settings ................... 57Proximity Alerts Settings ..................................57About Device and Privacy ............................... 57Restoring Settings ........................................... 58
nüvi 2405/2505 Series Owner’s Manual iii Appendix ������������������������������������������������ 58Power Cables .................................................. 58Caring for Your Device .....................................58Erasing User Data ...........................................59Changing the Fuse in the Vehicle Power Cable ............................................................... 60Mounting on Your Dashboard ..........................61Removing the Device, Cradle, and Mount ....... 61Updating Maps ............................................... 62Purchasing Additional Maps ............................62Custom Points of Interest ................................62Purchasing Accessories ..................................63Troubleshooting ..............................................64Index ������������������������������������������������������� 66
nüvi 2405/2505 Series Owner’s Manual 1 Getting Started‹ WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information.1 Connect the device to vehicle power (page 1).2 Mount the device (page 1).3 Register the device (page 3).4 Check for updates.• Software updates (page 3).• Free map update (page 3).Connecting the Device to Vehicle Power‹ WARNINGThis product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, remove the device from the vehicle when exiting or store it out of direct sunlight. Before you use your device on battery power, you should charge it.1 Plug the vehicle power cable ➊ into the USB port on the device ➋.2 Snap the mount ➌ onto the suction cup ➍. 3 Press the suction cup to the windshield, and ip the lever ➎ back toward the windshield.4 Fit the bottom of your device into the mount.5 Tilt your device back until it snaps into place.
2 nüvi 2405/2505 Series Owner’s Manual➊➋➍➌➎6 Plug the other end of the vehicle power cable into a power outlet in your vehicle.7 If necessary, connect the external antenna to the trafc receiver and secure it to the windshield using the suction cups.About myDashboardUse myDashboard to register your device, check for software and map updates, access product manuals and support, and more.Setting Up myDashboard1 Connect the USB cable ➊ to the USB port ➋ on the device.➊➋2 Connect the USB cable to the USB port on your computer.3 Go to www.garmin.com/dashboard. 4 Follow the on-screen instructions.
nüvi 2405/2505 Series Owner’s Manual 3 Registering the Device1 Open myDashboard (page 2).2 Follow the on-screen instructions.Updating the Software1 Open myDashboard (page 2).2 Under Software Updates, click Update Now.3 Follow the on-screen instructions.nüMaps Guarantee™If you register through myDashboard, your device could be eligible for one free map update within 90 days of rst acquiring satellites while you drive. Go to www.garmin.com/numaps for details and terms and conditions.Updating Maps1 Open myDashboard (page 2).2 Register the device (page 3).3 Under Map Updates, click Update Now.4 Follow the on-screen instructions.Turning Off the DeviceYou can power off the device completely.1 Hold the Power key ➊ for 3 seconds.➊NOTE: If you hold the Power key for less than 3 seconds, the device enters sleep mode (page 4).2 Select Off.
4 nüvi 2405/2505 Series Owner’s ManualResetting the DeviceYou can reset your device if it stops functioning.Hold the Power key for 10 seconds.About Sleep ModeUse sleep mode to conserve battery power when your device is not in use. Sleep mode uses very little power, and a battery charge lasts for weeks when your device is in sleep mode.Entering Sleep ModePress the Power key.Exiting Sleep ModeWhile the device is in sleep mode, Press the Power key and double-tap .
nüvi 2405/2505 Series Owner’s Manual 5 Adjusting the Screen Brightness1 Select Settings > Display > Brightness.2 Use the slider bar to adjust the brightness.Adjusting the Volume1 Select Volume.2 Select an option:• Use the slider bar to adjust the volume.• Select to mute the device.• Select > Audio Mixer and use the slider bars to adjust the volume for navigation prompts, phone, and media.About Automatic VolumeNOTE: Automatic volume is not available on all models.Your device can increase or decrease the volume automatically based on the level of background noise.Enabling Automatic Volume1 Select Volume > > Automatic Volume.2 Select Enabled.
6 nüvi 2405/2505 Series Owner’s ManualStatus Bar IconsThe status bar is located at the top of the main menu. The status bar icons display information about features on the device. You can select some icons to change settings or view additional information.GPS signal status. Bluetooth® technology status (appears when Bluetooth is enabled). See (page 31)Transportation mode indicator. Current time. Battery status.Satellite SignalsAfter the device is turned on, it begins acquiring satellite signals. The device may need a clear view of the sky to acquire satellite signals. When at least one of the bars is green, your device has acquired satellite signals.For more information about GPS, go to www.garmin.com/aboutGPS.Viewing GPS Signal StatusHold for three seconds.
nüvi 2405/2505 Series Owner’s Manual 7 Transportation ModesAutomobile modePedestrian modeRouting and navigation are calculated differently based on your transportation mode. For example, in Automobile mode, the estimated time of arrival is calculated using the speed limit of the roads on the route. Pedestrian mode calculates time of arrival based on walking speed.NOTE: Pedestrian routes do not include highways. If you have cityXplorer™ maps loaded on your device, pedestrian routes may include public transit (page 30).Choosing a Transportation ModeSelect or .Battery InformationAfter the device is connected to power, it begins to charge. in the status bar indicates the status of the internal battery. To increase the accuracy of the battery gauge, you should fully discharge the battery and then fully charge it. Do not unplug the device until it is fully charged. Using the On-screen Buttons• Select to return to the previous screen.• Hold to quickly return to the main menu.• Select or to see more choices. • Hold or to scroll faster. • Select to see a menu of options for the current screen.
8 nüvi 2405/2505 Series Owner’s ManualUsing the On-screen KeyboardSee “Language and Keyboard Settings” to change the keyboard layout (page 57).• Select a character on the keyboard to enter a letter or number.• Select to add a space. • Select to delete an entry.• Select to delete a character. • Hold to erase the entire entry.• Select to select the keyboard language mode. • Select to enter special characters, such as punctuation marks. • Select to change character capitalization.About ShortcutsYou can add shortcuts to the Where To? menu. A shortcut can point to a location, a category, or a search tool. Adding a Shortcut IconThe Where To? menu can contain up to 36 shortcut icons.1 Select Where To? > Add Shortcut.2 Select an item.Removing a Shortcut1 Select Where To > > Remove Shortcut(s).2 Select the shortcut to remove.3 Select the shortcut again to conrm.
nüvi 2405/2505 Series Owner’s Manual 9 Finding LocationsThe device offers many methods for nding locations.• By category (page 9)• Near another location (page 11)• By spelling the name (page 12)• By address (page 12)• Using the map (page 13)• Using recently found locations (page 14)• Using coordinates (page 13)• Using photos (page 15)• Using saved locations (page 16)About LocationsThe detailed maps loaded in your device contain locations, such as restaurants, hotels, and auto services. You can use the Categories function to browse for nearby businesses and attractions.Finding a Location by Category1 Select Where To?.2 Select a category, or select Categories.3 If necessary, select a subcategory.4 Select a location.Searching Within a CategoryTo narrow your search results, you can search within some categories.1 Select Where To?.2 Select a category, or select Categories.3 If necessary, select a subcategory.4 Select the search bar ➊.
10 nüvi 2405/2505 Series Owner’s Manual➊5 Enter all or part of the name.6 Select . Finding a Location Using the Search BarYou can use the search bar to search for locations by entering a category, brand name, address, or city name. 1 Select Where To?.2 Select the search bar.3 Enter a search term.Suggested search terms appear below the search bar as you type. • To search for a type of business, enter a category name, such as “movie theaters” or “coffee shops.”• To search for a business by name, enter all or part of the name.• To search for an address near you, enter the street number and street name.• To search for an address in another city, enter the street number, street name, city, and state.• To search for a city, enter the city and state.• To search for coordinates, enter latitude and longitude coordinates.4 Select an option:• To search using a suggested search term, select the term.• To search using the text you entered, select .5 If necessary, select a location.
nüvi 2405/2505 Series Owner’s Manual 11 Changing the Search AreaBy default, your device nds locations closest to your current location. You can nd a location near another city or location.1 Select Where To? > Searching Near.2 Select an option.3 If necessary, select a location.Reporting a Closed or Missing LocationIf your search results include an outdated or incorrect location, you can report the error to Garmin and remove the location from future searches.1 Find a location (page 9).2 Select a location from the list.3 Select .4 Select Edit.5 Select Report as Closed or Report as Missing.This information is sent to Garmin when you connect your device to myGarmin™ using your computer.Editing Location InformationYou can change the address or phone number for a location that appears in the search results.1 Find a location (page 9).2 Select a location from the list.3 Select .4 Select Edit.5 Select Address or Phone Number, and enter the new information.Rating a Point of InterestYou can assign a star rating to a point of interest.1 Find a location (page 9).2 Select .3 Select the stars to rate the point of interest.
12 nüvi 2405/2505 Series Owner’s ManualThe star rating updates on your device. About Search ToolsSearch tools allow you to search for cities, addresses, intersections, or coordinates. By default, the address search tool appears in the Where To? menu. To search for cities, intersections, and coordinates, you must add those search tools to the Where To? menu (page 8).Finding an AddressNOTE: The order of the steps may change depending on the map data loaded on your device.1 Select Where To? > Address. 2 Enter information as prompted by the on-screen instructions.3 If necessary, select Searching Near, and enter a different city or postal code.4 If necessary, select the address.Finding a CityBefore you can nd a city, you must add the city search tool to the Where To? menu (page 8).1 Select Where To? > Cities2 Select Enter Search.3 Enter a city name, and select .4 Select a city.Finding an IntersectionBefore you can nd an intersection, you must add a shortcut to the intersection search tool (page 8).1 Select Where To? > Intersections.2 Select a state or province.NOTE: If necessary, select State or Country to change the country, state, or province.3 Enter the rst street name, and select Next.4 If necessary, select the street.
nüvi 2405/2505 Series Owner’s Manual 13 5 Enter the second street name, and select Next.6 If necessary, select the street.7 If necessary, select the intersection. Finding a Location Using CoordinatesYou can nd a location using latitude and longitude coordinates. This method can be helpful when geocaching.1 Select Where To? > Categories > Coordinates.2 If necessary, select > Format, select the correct coordinate format for the type of map you are using, and select Save.3� Select the latitude coordinate.4 Enter the new coordinate, and select Done.5 Select the longitude coordinate.6 Enter the new coordinate, and select Done.7 Select View on Map.Finding a Location by Browsing the MapBefore you can nd places included in the map data, such as restaurants, hospitals, and fuel stations, you must enable the map layer for places along the road (page 25).1 Select View Map.2 Select the screen.3 Drag and zoom the map to display the area to search.Location markers appear on the map for places along the road.4 If necessary, select , and select a category icon to view only a specic category of places.5 Select an option: • Select a location marker.• Select a point, such as a street, intersection, or address location.
14 nüvi 2405/2505 Series Owner’s Manual6 If necessary, select the location description to view additional information.Finding a Location Using Quick SearchAfter you have performed a search for a point of interest, certain categories may display a Quick Search list that displays the last four destinations you selected.1 Select Where To?.2 Select a category, or select Categories.3 If applicable, select a destination from the Quick Search list. 4 If necessary, select the appropriate destination.Saving a Home LocationYou can set your home location for the location you return to most often. 1 Select Where To? > > Set Home Location.2 Select Enter My Address, Use My Current Location, or Recently Found.The location is saved as “Home” in the Saved folder (page 16).Going HomeSelect Where To? > Go Home.Editing Your Home Location Information1 Select Where To? > Saved > Home.2 Select > Edit.3 Enter your changes.4 Select Done.Finding Recently Found PlacesYour device stores the last 50 locations you have found.1 Select Where To? > Recent.2 Select a location.
nüvi 2405/2505 Series Owner’s Manual 15 Clearing the List of Recently Found PlacesSelect Where To? > Recent > > Clear > Yes.Finding ParkingYou can nd detailed parking information and pricing information.1 Select Where To? > Categories > Parking�2 Select an option.3 Select a parking location.Using Photo NavigationYou can upload pictures onto your device or memory card that include location information and create routes to the pictured locations.1 Connect your device to your computer (page 52).2 Go to http://connect.garmin.com/photos.3 Follow the instructions on the Web site to select and load pictures.4 Disconnect the device from the computer.5 Turn on the device.6 From the main menu, select Where To? > Saved > Photos. A list of pictures with location information appears.7 Select a picture.Setting a Simulated LocationIf you are indoors or not receiving satellite signals, you can use the GPS to set a simulated location.1 Select Settings > Navigation.2 Select GPS Simulator.3 Select View Map.4 Select an area on the map.The address of the location appears at the bottom of the screen.5 Select the address.
16 nüvi 2405/2505 Series Owner’s Manual6 Select Set Location.Saving LocationsYou can save locations so you can quickly nd them and create routes to them. Saving a Location1 Find a location (page 9).2 Select a location from the list.3 Select .4 Select Save. 5 If necessary, enter a name, and select Done.
nüvi 2405/2505 Series Owner’s Manual 17 Saving Your Current Location1 From the map, select the vehicle icon.2 Select Save.3 Enter a name, and select Done.4 Select OK.Starting a Route to a Saved Location1 Select Where To? > Saved.2 If necessary, select a category, or select All Categories.3 Select a location.4 Select Go!�Editing a Saved Location1 Select Where To? > Saved.2 If necessary, select a category.3 Select a location.4 Select .5 Select Edit.6 Select an option:• Select Name.• Select Phone Number.• To assign categories to the Favorite, select Categories.• To save a photo with the Favorite, select Assign Photo (page 42).• To change the symbol used to mark the Favorite on a map, select Change Map Symbol.7 Edit the information.8 Select Done.
18 nüvi 2405/2505 Series Owner’s ManualAssigning Categories to a Saved LocationYou can add custom categories to organize your saved locations.NOTE: Categories appear in the saved locations menu after you have saved more than 12 locations.1 Select Where To? > Saved.2 Select a location.3 Select .4 Select Edit > Categories.5 Enter one or more category names, separated by commas.Suggested categories appear below the text bar as you type. You can select a suggested word to use the suggestion.6 Select Done.Deleting a Saved LocationNOTE: Deleted locations cannot be recovered.1 Select Where To? > Saved.2 Select > Delete Saved Places.3 Select the box next to the saved locations to delete, and select Delete.Voice CommandAbout Voice CommandsNOTE: Voice Command is not available on all models, or for all languages and regions.Voice Command allows you to use your device by saying words and commands. The Voice Command menu provides voice prompts and a list of available commands.
nüvi 2405/2505 Series Owner’s Manual 19 Setting your Wakeup PhraseThe wakeup phrase is a word or phrase you can say to activate Voice Command. The default wakeup phrase is Voice Command. TIP: You can reduce the chance of accidental Voice Command activation by using a strong wakeup phrase.1 Select Apps > Voice Command > Customize Phrase.2 Enter a new wakeup phrase.The device indicates the strength of the wakeup phrase as you enter the phrase.3 Select Done.Activating Voice CommandSay your wakeup phrase. The Voice Command menu appears.Voice Command Tips• Speak in a normal voice directed at the device.• Reduce background noise, such as voices or the radio, to increase the accuracy of the voice recognition.• Speak commands as they appear on the screen.• Respond to voice prompts from the device as needed.• Increase the length of your wakeup phrase to reduce the chance of accidental Voice Command activation.Starting a Route Using Voice CommandYou can say the names of popular, well-known locations. 1 Say your wakeup phrase. 2 Say Find Place.
20 nüvi 2405/2505 Series Owner’s Manual3 Listen for the voice prompt, and speak the name of the location. A list of locations appears. 4 Say the line number. 5 Say Navigate.Finding an Address1 Say Voice Command. 2 Speak the entire address.
nüvi 2405/2505 Series Owner’s Manual 21 Muting InstructionsYou can disable the voice prompts for Voice Command without muting the device.1 Select Apps > Voice Command > .2 Select Mute Instructions > Enabled.Disabling Voice CommandYou can disable Voice Command, which prevents you from accidentally activating Voice Command while speaking.1 Select Apps > Voice Command > .2 Select Voice Command > Disabled.NavigationStarting a Route1 Search for a location (page 9).2 Select a location.3 Select Go!.4 If necessary, select an option.• Select Drive.• Select Walk.• Select Public Transit to calculate a route that combines public transit and walking.NOTE: You must have cityXplorer™ maps loaded to navigate using public transit (page 30).5 If necessary, select a route.
22 nüvi 2405/2505 Series Owner’s ManualStarting a Route to a Saved Location1 Select Where To? > Saved.2 If necessary, select a category, or select All Categories.3 Select a location.4 Select Go!.Using Multiple Route Preview1 Search for a location.2 Select a location.3 Select Routes and, if necessary, select Drive (page 9).A map appears with Faster Time, Shorter Distance, and Less Fuel routes highlighted.3 Use the on-screen buttons to select a route4 Select Go!.Following an Automobile RouteThe route is marked with a magenta line. A checkered ag marks your destination. As you travel, the device guides you to the destination with voice prompts, arrows on the map, and directions at the top of the map. If you depart from the original route, the device recalculates the route and provides new directions.
nüvi 2405/2505 Series Owner’s Manual 23 Using the Automobile Navigation MapWhile navigating in Automobile mode, you can select map features.1 Select the map.Map icons appear.2� Select an option:• To view different parts of the map, drag the screen.• To zoom in and out, select or .• To rotate the map view, select .• To switch from North Up to 3D view, select .• To add or remove map layers, select .Adding a Point to a RouteBefore you can add a stop to a route, you must be navigating a route in Automobile mode.1 While navigating a route, select to return to the main menu.2 Select Where To?. 3 Search for the location (page 9).4 Select Go!.5 Select Add to Active Route.Taking a DetourWhile navigating an automobile route, you can use detours to avoid obstacles ahead of you, such as construction zones.NOTE: If the route you are currently navigating is the only reasonable option, your device might not calculate a detour. From the map, select > Detour.
24 nüvi 2405/2505 Series Owner’s ManualStopping the RouteFrom the map, select > .About Exit ServicesWhile you navigate a route, you can nd gas, food, lodging, and restrooms near upcoming exits. Services are listed under tabs by category.Navigating to an Exit1 From the map, select > Exit Services�2 Use and to select an exit.3 Select > Go!.Finding Exit Services1 From the map, select > Exit Services.2 Use and to select an upcoming exit.3 Select an exit service tab.• To view nearby gas stations, select .• To view nearby restaurants, select .• To view nearby lodging, select .• To view nearby restrooms, select .4 Select a point of interest.Avoiding Road Features1 Select Settings > Navigation > Avoidances.2 Select the road features to avoid on your routes, and select Save.Avoiding Transit TypesNOTE: Transit types are available when cityXplorer maps are loaded (page 30).1 Select Settings > Navigation > Public Transit.2 Select the transit type to avoid on your routes.3 Select Save.
nüvi 2405/2505 Series Owner’s Manual 25 Navigating Off RoadIf you are not following roadways as you navigate, you can use Off Road mode. 1 Select Settings > Navigation.2 Select Calculation Mode > Off Road > Save. The route will be calculated as a straight line to the location.Map PagesCustomizing the MapCustomizing the Map LayersYou can customize which data appear on the map, such as icons for points of interest and road conditions.1 From the map, select . 2 Select Map Layers.3 Select which layers you want to include on the map, and select Save.Viewing the Trip LogYour device keeps a trip log, which is a record of the path you have traveled.1 Select Settings > Map and Vehicle > Map Layers.2 Select the Trip Log check box.
26 nüvi 2405/2505 Series Owner’s ManualChanging the Map Data Field1 From the map, select the data eld in the lower left-hand corner.2 Select a type of data to display.3 Select Save.Changing the Map Perspective1 Select Settings > Map and Vehicle > Driving Map View.2 Select an option:• Select Track Up to display the map in two dimensions (2-D), with your direction of travel at the top.• Select North Up to display the map in 2-D with North at the top.• Select 3-D to display the map in three dimensions.Changing the Tools on the MapMap tools appear as buttons on the map, which provide quick access to device functions. For example, you can add a button to take a detour, adjust the brightness, or view exit services. You can select up to three tools to display on the map.1 From the main menu, select Settings > Map and Vehicle > Map Buttons.2 Select an option:• To add a tool, select , and select a tool. • To remove a tool, select the tool, and select Remove. • To reset to the default tools, select Reset to Defaults.3 Select Save.
nüvi 2405/2505 Series Owner’s Manual 27 Changing the Map Dashboard1 Select Settings > Map and Vehicle > Dashboards.2 Use the arrows to select a dashboard.3 Select Save. Viewing TurnsResetting Trip Information1 From the map, select Speed > .2 Select an option:• When not navigating a route, select Reset All to reset every data eld, except the speedometer, on the page.• Select Reset Trip Data to reset the information on the trip computer. • Select Reset Max� Speed to reset the maximum speed.• Select Reset Trip B to reset the odometer.Viewing a List of TurnsWhen you are navigating a route, you can view all of the turns and maneuvers for your entire route and the distance between turns. 1 Select the text bar on the top of the map.2 Select a turn.The details for the turn appear. If available, an image of the junction appears for junctions on major roadways.Viewing the Entire Route on the Map1 While navigating an automobile route, select the navigation bar at the top of the map.2 Select > Map.
28 nüvi 2405/2505 Series Owner’s ManualViewing the Next TurnWhile navigating an automobile route, a preview of the next turn, lane change, or other maneuver appears in the upper-left corner of the map. The preview includes the distance to the turn or maneuver and the lane in which you should be traveling, if available.From the map, select to view the next turn on the map. Viewing JunctionsWhile navigating an automobile route, you can view the junctions on major roadways. When you approach a junction in a route, the image of that junction appears briey, if available. From the map, select to view the junction, if available. Viewing Trafc AlertsWhile you navigate an automobile route, a trafc alert may appear in the navigation bar. Select the alert to view more information.
nüvi 2405/2505 Series Owner’s Manual 29 Viewing Trip Information The trip information page displays your present speed and provides statistics about your trip. TIP: If you make frequent stops, leave the device turned on so it can accurately measure elapsed time during the trip. From the map, select the Speed eld.Pedestrian RoutesFollowing a Pedestrian RouteIn Pedestrian mode, your route is displayed on a two-dimensional map. ➋➊ ➊➌❹• Select ➊ to switch between sections of the route. • Select ➋ to view the route itinerary. • Select ➌ to center the map on your current location. • Select ➍ to zoom in and zoom out.
30 nüvi 2405/2505 Series Owner’s ManualAbout the Pedestrian Position IconWhen you are navigating in Pedestrian mode, indicates your approximate position and your direction of travel on the map.The circle around indicates the accuracy of your position on the map. A smaller circle means the displayed position is more accurate.Public Transit OptionsIf you have cityXplorer maps installed, the device calculates a route that uses a combination of public transit options, such as riding a bus or subway, and walking. NOTE: cityXplorer maps are not included with the device. See http://my.garmin.com to purchase cityXplorer maps.The yellow icons indicate the navigation method used in each section of the route. For example, when you see , board a bus at that point in the route.The black dots on the map are public transit stops along your route. NOTE: You can change the types of public transit and limit the distance spent walking during a pedestrian route (page 54).Enabling Transit TypesNOTE: Transit types are available when cityXplorer maps are loaded (page 30).1 Select Settings > Navigation > Public Transit.2 Select the transit type to include in your routes, and select Save.
nüvi 2405/2505 Series Owner’s Manual 31 Hands-Free Phone CallsAbout Hands-Free CallingUsing Bluetooth® wireless technology, your device can connect to your mobile phone to become a hands-free device. To determine whether your mobile phone with Bluetooth technology is compatible with your device, go to www.garmin.com/bluetooth.Your phone may not support all of the hands-free phone features your device provides.Enabling Bluetooth Wireless Technology1 Select Settings > Bluetooth.2 Select Bluetooth.Pairing Your PhoneBefore you can use hands-free calling, you must pair your device with a compatible mobile phone. Pairing your phone with your device allows your phone and device to recognize each other and connect quickly. 1 Place your phone and your device within 33 ft. (10 m) of each other. 2 On your device, enable Bluetooth wireless technology (page 31).3 Select an option:• Select Add Phone.• If you have already paired a different phone, select Phone > .4 On your phone, enable Bluetooth wireless technology.5 On your device, select OK.A list of nearby Bluetooth devices appears.
32 nüvi 2405/2505 Series Owner’s Manual6 Select your phone from the list, and select OK.7 If necessary, on your phone, conrm that the device is allowed to connect.8 If necessary, enter the device Bluetooth PIN (1234) into your phone. Disconnecting Your Phone1 Select Settings > Bluetooth.2 Select Phone > None > Save.Your phone is disconnected from your device but remains paired with your device.Tips After Pairing the Devices• After the initial pairing, the two devices can connect automatically each time you turn them on. • When your phone is connected to your device, you can make phone calls.• When you turn on the device, it tries to connect to the last phone to which it was connected.• You might have to set your mobile phone to connect to the device automatically when it is turned on.Receiving a Call When you receive a call, select an option:• Select Answer. • Select Ignore to ignore the call.Placing a CallDialing a Number1 Select Phone > Dial. 2 Enter the number.3 Select Dial.
nüvi 2405/2505 Series Owner’s Manual 33 Calling a Contact in Your in your Phone BookYour phone book is loaded from your phone to the device each time your phone and the device connect. It may take a few minutes for the phone book to be available. Some phones do not support this feature.1 Select Phone > Phone Book.2 Select a contact.3 Select Call.Calling a Point of Interest1 Select Phone > Browse Categories. 2 Select a point of interest (page 9). 3 Select Call.Using the Call HistoryYour call history is loaded from your phone to the device each time your phone and the device connect. It may take a few minutes for the call history to be available. Some phones do not support this feature.1 Select Phone > Call History.2 Select a category.A list of calls appears, with the most recent calls at the top.3 Select a call.
34 nüvi 2405/2505 Series Owner’s ManualUsing In-Call Options 1 While on a call, select . 2 Select an option:• To transfer audio to your phone, select Handset.TIP: You can use this feature if you want to turn off your device and remain on the call, or if you need privacy.• To display a keypad, select Keypad. TIP: You can use this feature to use automated systems, such as voice mail.• To mute the microphone, select Mute. • To hang up, select End Call.Saving a Home Phone NumberTIP: After you save a home number, you can edit the home number by editing “Home” in Saved page 16.Select Phone > > Set Home Number, enter your phone number, and select Done. Calling HomeBefore you can call home using the Call Home button, you must enter a phone number for your home location.Select Phone > Call Home.
nüvi 2405/2505 Series Owner’s Manual 35 Using the AppsViewing Current Location InformationUse the Where Am I? page to view information about your current location. This feature is helpful if you need to tell emergency personnel your location. Select Apps > Where Am I?.Finding Nearby Services1 Select Apps > Where Am I?.2 Select Hospitals, Police Stations, or Fuel to view the nearest locations in that category.Using HelpSelect Apps > Help to view information about using the device. Searching Help TopicsSelect Apps > Help > .About ecoRoute The ecoRoute™ feature calculates the fuel economy and the fuel price of navigating to a destination, and offers tools for improving fuel efciency.The data provided by the ecoRoute feature is an estimate only. The data is not actually read from the vehicle, unless you are using the ecoRoute HD accessory. To receive more-accurate fuel reports for your specic vehicle and driving habits, calibrate the fuel economy (page 36).
36 nüvi 2405/2505 Series Owner’s ManualecoRoute HD AccessoryWhen connected to the ecoRoute HD accessory, your device can receive real-time vehicle information, such as error messages, RPM, and battery voltage. Your device includes data read from the vehicle by the ecoRoute HD accessory when calculating ecoRoute data.Go to www.garmin.com/ecoroute for compatibility and purchasing information.Setting up the Vehicle ProleThe rst time you use the ecoRoute features, you must enter vehicle information. 1 Select Apps > ecoRoute™.2 Enter fuel and mileage information.Changing the Fuel Price1 Select Apps > ecoRoute™ > At the Pump.2 Enter the current price of fuel, and select Next.3 Select Yes.Calibrating the Fuel EconomyYou can calibrate the fuel economy to receive more-accurate fuel reports for your specic vehicle and driving habits. You should calibrate when you ll up your fuel tank.1 Select Apps > ecoRoute™ > At the Pump.2 Enter the current fuel price.3 Enter the amount of fuel the vehicle has used since the last time the fuel tank was lled. 4 Enter the distance you have travelled since the last time the fuel tank was lled. 5 Select Next. The device calculates the average vehicle fuel economy.6 Select Save.
nüvi 2405/2505 Series Owner’s Manual 37 About the ecoChallengeecoChallenge helps you maximize the vehicle fuel economy by scoring your driving habits. The higher your ecoChallenge scores, the more fuel you have saved. The ecoChallenge collects data and calculates a score whenever your device is moving and in Automobile mode.Viewing ecoChallenge Scores• View your current score in the ecoChallenge icon on the map.• Select to view detailed scores.About the ecoChallenge Score• Current—displays the score for your current driving activity.• Overall—displays an average of the speed, acceleration, and braking score.• Speed—displays your score for driving your vehicle at the optimal speed for conserving fuel (45–60 mph for most vehicles).• Acceleration—displays your score for smooth and gradual acceleration. You lose points for rapid acceleration.• Braking—displays your score for smooth and gradual braking. You lose points for hard braking.Removing the ecoChallenge Score From the MapSelect > > Settings > Hide > Save. Resetting the ecoChallenge Scores1 Select Apps > ecoRoute > Vehicle Prole.2 Select Reset.
38 nüvi 2405/2505 Series Owner’s ManualViewing Fuel Economy InformationYou can view your fuel consumption, your total fuel cost, and your average fuel economy.1 Select Apps > ecoRoute > Fuel Economy.2 Select a section of the graph to zoom in.Mileage ReportsMileage reports provide the distance, the time, the average fuel economy, and the fuel cost of navigating to a destination.A mileage report is created for every route that you drive. If you stop a route on the device, a mileage report is created for the distance you traveled. Viewing a Mileage ReportYou can view saved mileage reports on the device. TIP: You can access mileage reports in the Reports folder on the device drive or volume (page 52).1 Select Apps > ecoRoute™ > Mileage Report.2 Select a report. Resetting ecoRoute Information1 Select Apps > ecoRoute™ > Vehicle Prole.2 Select > Reset.
nüvi 2405/2505 Series Owner’s Manual 39 About AudiobooksThe device can play audiobooks from Audible.com. This feature requires a subscription to Audible.com. Go to www.audible.com/garmin to activate a free 30-day trial subscription.Loading Audiobooks onto Your DeviceBefore you can load audiobooks onto your device, you must subscribe to Audible.com. Go to www.audible.com/garmin for more information.1 Connect your device to your computer (page 2).2 On your computer, log in your Audible.com account.3 Follow the instructions from Audible.com.Playing an Audiobook1 Select Apps > Audible.2 Select Browse.3 Select an option:• Select Titles.• Select Authors.• Select Narrators.4 Select a book.5 Select an option to control playback.• To add a bookmark, select .• To pause playback, select .• To resume playback, select .• To move quickly forward or backward in the book, use the slider bar at the top of the page.• To go to the next chapter, select .• To go to the previous chapter, select .
40 nüvi 2405/2505 Series Owner’s Manual• To fast forward, hold .• To rewind, hold . Adding a BookmarkWhen you play an audiobook, the player automatically resumes the audiobook from the point where you last stopped. You can add a bookmark to mark a certain spot in the audiobook.While playing an audiobook, select > Add Bookmark.Resuming Playback from a Bookmark1 While playing an audiobook, select .2 Select a bookmark.Renaming a BookmarkBy default, the device names a bookmark using the time stamp of the bookmark. You can rename a bookmark.1 While playing an audiobook, select > > Rename Bookmarks.2 Select a bookmark.3 Enter a name, and select Done.Deleting a Bookmark1 While playing an audiobook, select > > Delete Bookmarks.2 Select a bookmark.
nüvi 2405/2505 Series Owner’s Manual 41 Planning a TripYou can use the trip planner to create and save a trip with multiple destinations.1 Select Apps > Trip Planner.2 Select .3 Select Select Start Location.4 Search for a location (page 9).5 Select Select.6 To add additional locations, select .7 Select Next.8 Enter a name, and select Done.Editing a Trip Itinerary1 Select Apps > Trip Planner.2 Select a saved trip.➊➋3 Select an option:• Select ➊ to change the arrival or departure time.• Select ➊ > Duration to record how long you will stay at a location. • Select ➋ to change the transportation mode or route preference for that portion of the trip. • Select Map to view the trip on the map.
42 nüvi 2405/2505 Series Owner’s ManualNavigating to a Saved Trip1 Select Apps > Trip Planner.2 Select a saved trip.3 Select Go!.4 If prompted, select a route (page 22).Editing a Saved Trip1 Select Apps > Trip Planner.2 Select a saved trip.3 Select .4 Select an option:• Select Rename Trip.• Select Edit Destinations to add and delete locations, or to change the order of locations.• Select Delete Trip.• Select Optimize Order to arrange the stops on your trip in the most-efcient order.Viewing PicturesView pictures that you have stored in the device or on a memory card. See (page 51) for more information about loading pictures on the device.1 Select Apps > Picture Viewer. 2 Use the arrows to scroll through the images. 3 Select a picture.Viewing a Slideshow1 Select Apps > Picture Viewer.2 Select .While a slideshow is playing, you can select the screen to stop the slideshow.Setting a Picture as Wallpaper1 Select Apps > Picture Viewer.2 Select a picture.3 Select > Set as Wallpaper.
nüvi 2405/2505 Series Owner’s Manual 43 4 Use the on-screen buttons to adjust the wallpaper.5 Select Save.Deleting Pictures1 Select Apps > Picture Viewer. 2 Select a picture.3 Select > Delete > Yes.Viewing Previous Routes and DestinationsBefore you can use this feature, you must enable the travel history feature (page 58).Your can view your previous routes and places you have stopped on the map.Select Apps > Where I’ve Been.Using the World Clock 1 Select Apps > World Clock.2 If necessary, select a city, enter a city name, and select Done. Viewing the World MapSelect Apps > World Clock > . Nighttime hours appear in the shaded area of the map. Finding Your Last Parking SpotWhen you remove your device from the vehicle mount while the device is on, your current location is saved as a parking spot.Select Apps > Last Spot.
44 nüvi 2405/2505 Series Owner’s ManualUsing the CalculatorSelect Apps > Calculator.Converting Units 1 Select Apps > Unit Converter. 2 If necessary, select the button next to Convert, select a measurement category, and select Save.3 If necessary, select a unit button, select a unit of measurement, and select Save.4 Select the eld below the unit you want to convert.5 Enter the number, and select Done.Setting Currency Conversion Rates ManuallyYou can update the currency conversion rates manually so that you are always using the most-current rates.1 Select Apps > Unit Converter. 2 Select the button next to Convert.3 Select Currency, then select Save. 4 If necessary, select a currency button, select a different currency, and select Save.5 Select the button at the bottom of the screen that displays the currency conversion rate.6 Select the box next to a currency.7 Enter a value, and select Done.8 Select OK.About OffersIf your device package includes a trafc receiver, you will receive location-relevant offers and coupons. Ad-based trafc information is only available in North America.NOTE: The trafc receiver must be connected to external power and you must be in a coverage area to receive ad-based trafc information.
nüvi 2405/2505 Series Owner’s Manual 45 See our privacy statement at www.garmin.com/privacy/ to view our privacy information.Viewing Offers‹ CAUTIONDo not attempt to write down the coupon codes while driving.1 Select an offer that appears on the screen to search for the nearest location related to that offer. 2 If available, select to view a coupon code. 3 Write down this code and present it when you arrive at the location. Viewing an Offer ListSelect Apps > Offers to view a list of the offers you have received.Disabling Trafc and OffersTo disable offers, you must disable trafc. 1 Select Settings > Trafc.2 Select the Live Trafc check box. Using the Language GuideUse the Language Guide to look up and translate words or phrases.Select Apps > Language Guide.Selecting Languages in a Language GuideYou can select the languages you want to translate when translating words and phrases.1 Select Apps > Language Guide > Words and Phrases.2 Select > Language. 3 Select From, select the language to translate from, and select Save.
46 nüvi 2405/2505 Series Owner’s Manual4 Select To, select the language to translate to, and select Save. Translating Words and Phrases1 Select Apps > Language Guide > Words and Phrases.2 Select a category and subcategories.3 If necessary, select , enter a keyword, and select Done.4 Select a word or a phrase.5 Select to listen to the translation.Using the Bilingual Dictionary1 Select Apps > Language Guide > Bilingual Dictionaries.2 Select a dictionary.3 If necessary, select , enter a word, and select Done.4 Select a word.5 Select to listen to the translation.TrafcNOTICEGarmin is not responsible for the accuracy or timeliness of the trafc information.Trafc information may not be available in all areas or countries.A trafc receiver is included in some packages, and is an optional accessory for all models. It is built into the vehicle power cable. The powered trafc receiver and the device must be in data range of a station transmitting trafc data to receive trafc information. You do not need to activate the subscription included with your trafc receiver. For information about trafc receivers and coverage areas, go to www.garmin.com/trafc.
nüvi 2405/2505 Series Owner’s Manual 47 Disabling Trafc1 Select Settings�2 Select the Live Trafc check box.The device no longer displays live trafc data, but still avoids potentially congested areas using trafcTrends (page 57).Trafc DataWhen the receiver is within a trafc coverage area, your device will begin displaying trafc information.The trafc receiver and the device may need to be in data range of an FM station transmitting trafc information.1 Connect the trafc receiver to an external power source.2 Connect the trafc receiver to the device.NOTE: Heated (metallized) windshields could degrade the performance of the trafc receiver.Trafc Receiver➊➋➌➍➎➊Mini-USB connector➋External antenna connector➌Internal antenna➍Power LED➎Vehicle power adapter
48 nüvi 2405/2505 Series Owner’s ManualAbout the Trafc IconWhen you are receiving trafc information, a trafc icon appears on the map. The trafc icon changes color to indicate the severity of trafc conditions. Color Severity MeaningGreen Low Trafc is owing freely.Yellow Medium Trafc is moving but there is a delay. There is moderate trafc congestion.Red High Trafc is not moving or moving slowly. There is a severe delay.Trafc on Your RouteWhen calculating your route, the device examines the current trafc and automatically optimizes the route for the shortest time. If a severe trafc delay occurs on your route while you are navigating, your device automatically recalculates the route. The trafc icon changes color to indicate the severity of trafc conditions on your route or on the road you are currently traveling.Your device may route you through a trafc delay if a better alternative route does not exist. The delay time is added into your estimated time of arrival automatically.
nüvi 2405/2505 Series Owner’s Manual 49 Viewing Trafc on Your Route1 While navigating a route, select .2 Select Trafc on Route.A list of trafc events appears, organized by their location on the route.3 Select an event.Manually Avoiding Trafc on Your Route1 From the map, select .2 Touch Trafc On Route. 3 If necessary, use the arrows to view other trafc delays on your route.4 Touch > Avoid. Taking an Alternate Route1 While navigating an automobile route, select .2 Select Alternate Route. 3 Select a route. Viewing Trafc on the MapThe trafc map shows color-coded trafc ow and delays on nearby roads. 1 From the map, select .2 Select Trafc Conditions. Trafc in Your AreaSearching for Trafc Delays1 From the map page, select .2 Select Trafc Conditions > . 3 Select an item in the list.4 If there is more than one delay, use the arrows to view additional delays.Viewing a Trafc Incident on the Map1 From the map, select .2 Select Trafc Conditions.3 Select a trafc icon.
50 nüvi 2405/2505 Series Owner’s ManualUnderstanding Trafc DataThe trafc legend explains the icons and colors used on the trafc map.1 From the map, select .2 Select Trafc Legend.Trafc SubscriptionsSubscription ActivationYou do not need to activate the subscription included with your FM trafc receiver. The subscription activates automatically after your device acquires satellite signals while receiving trafc signals from the pay service provider. Lifetime SubscriptionsSome models include subscriptions to lifetime features.• LT—This model includes a lifetime trafc subscription and a trafc receiver.• LMT—This model includes a nüMaps Lifetime™ subscription, lifetime trafc subscription (page 62), and a trafc receiver.Adding a SubscriptionYou can purchase trafc subscriptions for other regions or countries.1 From the main menu, select Settings > Trafc. 2 Select an option:• For non-North American units, select Subscriptions > . • For North American units, select . 3 Write down the FM trafc receiver unit ID. 4 Go to www.garmin.com/fmtrafc to purchase a subscription and get a 25-character code.The trafc subscription code cannot be reused. You must obtain a new code each time you renew your service. If you own
nüvi 2405/2505 Series Owner’s Manual 51 multiple FM trafc receivers, you must obtain a new code for each receiver. 5 Select Next on the device.6 Enter the code.7 Select Done. Data ManagementYou can store les, such as JPEG image les, on your device. The device has a memory card slot for additional data storage. NOTE: The device is not compatible with Windows® 95, 98, Me, Windows NT®, and Mac® OS 10.3 and earlier. File TypesThe device supports the following le types:• JPEG and JPG image les (page 42)• Maps and GPX waypoint les from MapSource® (page 63)• GPI custom POI les from Garmin POI Loader (page 63)About Memory CardsYou can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping software. In addition to map and data storage, the memory card can be used to store les such as maps, images, geocaches, routes, waypoints, and custom POIs.Installing a Memory CardThe device supports microSD™ and microSDHC memory or data cards.1 Insert a memory card into the slot on the device.2 Press it in until it clicks.
52 nüvi 2405/2505 Series Owner’s ManualTransferring Files from Your Computer 1 Connect the device to your computer (page 2).Your device and memory card appear as removable drives in My Computer in Windows and as mounted volumes on Mac computers. NOTE: Some computers with multiple network drives cannot display nüvi drives. See your operating system help le to learn how to map the drives. 2 On your computer, open the le browser. 3 Select the le.4 Select Edit > Copy. 5 Open the Garmin or memory card drive or volume.6 Select Edit > Paste. The le appears in the list of les in the device memory or on the memory card.Disconnecting the USB Cable1� Complete an action:• For Windows computers, double-click the eject icon in your system tray.• For Mac computers, drag the volume icon to the Trash . 2 Disconnect the cable from your computer.Deleting Files NOTICEIf you do not know the purpose of a le, do not delete it. Your device memory contains important system les that should not be deleted.1 Open the Garmin drive or volume.2 If necessary, open a folder or volume.3 Select a le.
nüvi 2405/2505 Series Owner’s Manual 53 4 Press the Delete key on your keyboard. Customizing the Device1 Select Settings.2 Select a setting category. 3 Select the setting to change it. Map and Vehicle SettingsSelect Settings > Map and Vehicle.• Vehicle—changes the icon to represent your position on the map. Go to www.garmingarage.com for more icons.• Driving Map View—sets the perspective on the map. • Pedestrian Map View—sets the perspective on the map.• Map Detail—sets the level of detail on the map. More detail may cause the map to draw slower.• Map Theme—changes the color of the map data.• Map Buttons—sets which buttons are included on the map. You can include up to three buttons on the map.• Map Layers—sets the data that appears on the map (page 25).• Dashboards—sets the map dashboard layout.• myMapsEnabling MapsTIP: To purchase additional map products, go to www.garmin.com/maps.1� Select Settings > Map and Vehicle > myMaps.2� Select a map.
54 nüvi 2405/2505 Series Owner’s ManualNavigation SettingsSelect Settings > Navigation. • Calculation Mode—sets route preference.• Avoidances—sets road features to avoid on a route.• Custom Avoidances—allows you to avoid specic roads or areas.• Advanced Detours—sets the length of a detour.• Limit Walking—controls the maximum walking distance included in a pedestrian route.• Public Transit—enables or disables transit types.• Safe Mode—disables all functions that require signicant operator attention could become a distraction while driving.• GPS Simulator—stops the device from receiving a GPS signal, and saves battery power.Route PreferencesSelect Settings > Navigation > Calculation Mode. The route calculation is based on road speeds and vehicle acceleration data for a given route.• Faster Time—calculates routes that are faster to drive but can be longer in distance.• Shorter Distance—calculates routes that are shorter in distance but can take more time to drive.• Less Fuel—calculates routes that could use less fuel than other routes.• Off Road—calculates a direct line from your location to your destination.
nüvi 2405/2505 Series Owner’s Manual 55 Display SettingsSelect Settings > Display. • Orientation—changes to landscape or portrait mode.• Color Mode—sets a light background (Day), a dark background (Night), or automatically switches between the two based on the sunrise time and the sunset time for your current location (Auto).• Brightness—changes the brightness of the screen. Decreasing the brightness can save battery power. • Display Timeout—sets the amount of idle time before your device enters sleep mode.• Screenshot—allows you to take a picture of the device screen. Screenshots are saved in the screenshot folder of the device storage.Capturing Screenshots1 Select Settings > Display > Screenshot > Enabled.2 Select to take a screenshot. The picture bitmap le is saved in the screenshots folder on the device drive (page 52). Bluetooth SettingsSelect Settings > Bluetooth.• Bluetooth—enables the Bluetooth component.• Add Phone or Phone—manages connections between your device and mobile phones with Bluetooth wireless technology. • Friendly Name—allows you to enter a friendly name that identies your nüvi on devices with Bluetooth technology.
56 nüvi 2405/2505 Series Owner’s ManualManaging the Bluetooth Device ListYou can add, disconnect, or delete phones that your device detects while Bluetooth is enabled.1 Select Settings > Bluetooth > Phone.2 Select an option:• Select a phone for your device to connect with.• Select to add a phone to the menu.• Select to delete a phone from the device memory.• Select None to drop your current connection.Disabling Bluetooth1 Select Settings > Bluetooth.2 Select Bluetooth.Trafc SettingsSelect Settings > Trafc.• Trafc—enables trafc and offers.• Subscriptions—lists current trafc subscriptions.• trafcTrends™Purchasing Trafc SubscriptionsYou can purchase additional subscriptions or a renewal if your subscription expires. Go to www.garmin.com/fmtrafc. Viewing Trafc SubscriptionsSelect Settings > Trafc > Subscriptions.
nüvi 2405/2505 Series Owner’s Manual 57 trafcTrendsWhen the trafcTrends feature is enabled, your device records historic trafc data and uses that data to calculate more-efcient routes. This information is sent to Garmin when your device when you connect your device to myGarmin™ using your computer.NOTE: Different routes may be calculated based on trafc trends for the day of the week or the time of day.Disabling trafcTrendsTo prevent your device from recording or sharing trafc data, you must disable trafcTrends.Select Settings > Trafc > trafcTrends. Units and Time SettingsSelect Settings > Units and Time.• Current Time—sets the device time.• Units—sets the unit of measure used for distances.• Time Format—allows you to select a 12-hour, 24-hour, or UTC display time.Language and Keyboard SettingsSelect Settings > Language. • Voice Language—sets the language for voice prompts.• Text Language—sets all on-screen text to the selected language.NOTE: Changing the text language does not change the language of user-entered data or map data, such as street names.• Keyboard Language—sets the language for your keyboard.• Keyboard Layout—sets the keyboard layout.
58 nüvi 2405/2505 Series Owner’s ManualProximity Alerts SettingsSelect Settings > Proximity Alerts.• Audio—sets the tone of an alert.• Alerts—alerts you when you approach custom safety cameras.About Device and PrivacySelect Settings > About Device and Privacy.• About—displays the software version number, the unit ID number, and information about other software features. • EULAs—displays the end-user license agreements that apply to your choice.NOTE: You need this information when you update the system software or purchase additional map data (page 63).• Position Reporting—allows Garmin to share your speed, direction, and location with other service providers anonymously with your consent.• Keep Travel History—allows the device to record information for the, Where I’ve Been (page 43), and Trip Log (page 25) features.• Clear Travel HistoryRestoring SettingsYou can restore a category of settings or all settings to the factory defaults.1 Select Settings.2 If necessary, select a settings category.3 Select > Restore.
nüvi 2405/2505 Series Owner’s Manual 59 AppendixPower CablesYour device can be powered three ways.• Vehicle power cable• USB cable• AC adapter (optional accessory)Caring for Your DeviceNOTICEAvoid dropping your device and operating it in high-shock and high-vibration environments.Do not expose the device to water. Contact with water can cause this device to malfunction.Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.Never use a hard or sharp object to operate the touchscreen, or damage may result.Cleaning the Outer CasingNOTICEAvoid chemical cleaners and solvents that can damage plastic components.1 Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent solution. 2 Wipe the device dry.Cleaning the Touchscreen1 Use a soft, clean, lint-free cloth.2 If necessary, use water, isopropyl alcohol, or eyeglass lens cleaner.3 Apply the liquid to the cloth.4 Gently wipe the screen with the cloth.
60 nüvi 2405/2505 Series Owner’s ManualAvoiding Theft• Remove the device and mount from sight when not in use. • Remove the residue left on the windshield by the suction cup. • Do not keep your unit in the glove compartment. • Register your device at http://my.garmin.com. Erasing User DataNOTE: Any items that you have saved are erased.1 Turn the device on.2 Hold your nger on the lower-right corner of the device screen.3 Keep your nger pressed until the pop-up window appears. 4 Select Yes to clear all user data.All original settings are restored. Extending the Battery Life• Keep your device away from extreme temperatures. • Put the device in sleep mode (page 4).• Decrease the screen brightness (page 5).• Do not leave your device in direct sunlight.• Decrease the volume (page 5).• Disable offers and trafc (page 45).• Disable Bluetooth (page 56).• Shorten the display timeout time (page 55).
nüvi 2405/2505 Series Owner’s Manual 61 Changing the Fuse in the Vehicle Power CableNOTICEWhen replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. The vehicle power cable does not work unless it is assembled correctly.If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter. 1 Unscrew the end piece.TIP: You may need to use a coin to remove the end piece.2 Remove the end piece, the silver tip, and the fuse (glass and silver cylinder).3 Install an 1 A fast-blow fuse.4 Place the silver tip in the end piece. 5 Screw the end piece back into the vehicle power cable.Mounting on Your DashboardNOTICEThe permanent mounting adhesive is extremely difcult to remove after it is installed. Use the enclosed mounting disk to mount your device to the dashboard and comply with certain state regulations. 1� Clean and dry the dashboard where you are placing the disk.2 Remove the backing from the adhesive on the bottom of the disk.3 Place the disk on the dashboard.4 Remove the clear plastic cover from the top of the disk.End pieceSilver tipFuse
62 nüvi 2405/2505 Series Owner’s Manual5 Place the suction cup mount on top of the disk. 6 Flip the lever down (toward the disk).Removing the Device, Cradle, and MountRemoving the Device from the Cradle1 Press up on the tab on the top of the cradle.2 Tilt the device forward.Removing the Cradle from the Mount1 Turn the cradle to the right or left.2 Apply pressure until the socket on the cradle releases the ball on the mount.Removing the Suction Cup Mount from the Windshield1 Flip the lever on the suction cup mount toward you.2 Pull the tab on the suction cup toward you.Updating Maps You can update the maps on your device. For more information, go to www.garmin.com/mapupdates, and select Map Update User Guide.About nüMaps LifetimeSome models include subscriptions to nüMaps Lifetime, which provides quarterly map updates for the life of your device.Go to www.garmin.com/us/maps/numaps_lifetime for terms and conditions.LM This model includes a nüMaps Lifetime subscription.LMT This model includes a lifetime trafc subscription, nüMaps Lifetime subscription, and a trafc receiver.
nüvi 2405/2505 Series Owner’s Manual 63 Purchasing Additional Maps1 Go to your device product page on the Garmin Web site (www.garmin.com). 2 Click the Maps tab.3 Follow the on-screen instructions.Custom Points of InterestCustom POIs are customized points on the map. They can contain alerts that let you know if you are near a designated point or if you are traveling faster than a specied speed. Installing a POI LoaderYou can create or download custom POI lists and install them on your device using POI Loader software.1 Go to www.garmin.com/extras.2 Click Services > POI Loader.3 Install the POI Loader onto your computer.Using the POI Loader Help FilesFor more information on the POI Loader, refer to the help le.With the POI Loader open, click Help.
64 nüvi 2405/2505 Series Owner’s ManualFinding Extras1 Select Where To? > Extras.2 Select a category. Purchasing AccessoriesGo to http://buy.garmin.com.Troubleshooting Problem SolutionMy device is not acquiring satellite signals• Verify the GPS simulator is turned off (page 54). • From the main menu, select Settings > System > GPS Simulator > Off. • Take your device out of parking garages and away from tall buildings and trees. • Remain stationary for several minutes.The suction cup will not stay on my windshield.• Clean the suction cup and windshield with rubbing alcohol. • Dry with a clean, dry cloth. • Mount the suction cup (page 1).The device does not charge in my vehicle.• Check the fuse in the vehicle power cable (page 61).• Verify the vehicle is turned on and is supplying power to the power outlet.• Your device can only charge between 32°F and 113°F (between 0°C and 45°C). If the device is placed in direct sunlight or in a hot environment, it cannot charge. My battery does not stay charged for very long.To maximize the time between changes, turn down the backlight (page 55).My battery gauge does not seem accurate.Allow the unit to fully discharge, and fully charge it (without interrupting the charge cycle).How do I know my device is in USB mass storage mode?When your device is in USB mass storage mode, a picture of a device connected to a computer is shown on the device screen. Also, you should see two new removable disk drives listed in My Computer.
nüvi 2405/2505 Series Owner’s Manual 65 The device is connected to the computer, but it will not go into mass storage mode.1� Disconnect the USB cable from your computer. 2� Turn off the device. 3� Plug the USB cable into a USB port on your computer and into your device. The device automatically turns on and goes into USB mass storage mode. 4� Verify your device is connected to a USB port and not a USB hub. I cannot see any new removable drives in my list of drives.If you have several network drives mapped on your computer, Windows can have trouble assigning drive letters to your device drives. Refer to your operating system Help le to learn how to map or assign drive letters. My phone will not connect to the device.• From the main menu, select Tools > Settings > Bluetooth. The Bluetooth eld must be set to Enabled.• Turn on your phone and bring it within 33 feet of the device. • Go to www.garmin.com/bluetooth for more help. Troubleshooting Problem SolutionMy device is not acquiring satellite signals• Verify the GPS simulator is turned off (page 54). • From the main menu, select Settings > System > GPS Simulator > Off. • Take your device out of parking garages and away from tall buildings and trees. • Remain stationary for several minutes.The suction cup will not stay on my windshield.• Clean the suction cup and windshield with rubbing alcohol. • Dry with a clean, dry cloth. • Mount the suction cup (page 1).The device does not charge in my vehicle.• Check the fuse in the vehicle power cable (page 61).• Verify the vehicle is turned on and is supplying power to the power outlet.• Your device can only charge between 32°F and 113°F (between 0°C and 45°C). If the device is placed in direct sunlight or in a hot environment, it cannot charge. My battery does not stay charged for very long.To maximize the time between changes, turn down the backlight (page 55).My battery gauge does not seem accurate.Allow the unit to fully discharge, and fully charge it (without interrupting the charge cycle).How do I know my device is in USB mass storage mode?When your device is in USB mass storage mode, a picture of a device connected to a computer is shown on the device screen. Also, you should see two new removable disk drives listed in My Computer.
66 nüvi 2405/2505 Series Owner’s ManualIndexSymbols2-D, 3-D map view 25Aaccessories 62adding a stop 22addresses 11audiobook 38bookmark 39loading 38playing 38automatic volume 5enabling 5avoidingpublic transit types 23, 29theft 59trafc 48Bbattery 63Bluetooth technology 30–73friendly name 54pairing with phone 30settings 54brightness 54Ccalculator 43callsanswering 31hanging up 33home 33muting 33caring for your device 58categorysearching within 9charging your device 1, 63cityXplorer maps 20, 29cleaning your device 58computer, connecting 2convertingcurrency 43units 43coordinates 12current location, saving 15customizing the device 52–59custom POIs 62Ddashboard disk 60deletingall user data 59character 7les 51pictures 42recent nds list 14saved locations 17trips 41detailed maps 50, 52detours 22display settings 23, 29display timeout 54driving directions 26
nüvi 2405/2505 Series Owner’s Manual 67 EecoRoute 34–37calibrate fuel economy 35ecoChallenge score 36fuel economy information 37mileage report 37vehicle prole 34editingchange categories 16change map symbol 16destinations 41home location 14saved locations 16saved trip 41extras 62Ffeedback on POI's 10lesdeleting 51supported types 50nding locationsby address 11by coordinates 12recent selections 14saved locations 16using photos 14using search bar 9fuse, changing 60Ggeocaching 12go home 13GPSsettings 53simulator 15Hhelp 34historical trafc 55homephone number 33setting a location 13JJPEG image les 50junction view 27Kkeyboard 7language mode 7, 56Llatitude and longitude 12locations 9Mmapsadding 62detail level 52errors 10purchasing 62theme 52view 25MapSource 50, 62mass storage mode 50measurements, converting 43memory card 50
68 nüvi 2405/2505 Series Owner’s Manualmileage report 37mounting the deviceon dashboard 60on windshield 63removing from mount 61mutephone call 33myDashboard 2myTrendsenabling 57Nnavigation 21off road 24pedestrian 28photo 14nearby services 34next turn 27nüMaps Lifetime 61Ooffers 43disabling 44viewing 44off-road navigation 24, 53on-screen buttons 7Ppairing a mobile phone 30parking 14last spot 42saving 43pedestrian modesettings 23, 29photo navigationloading pictures 14picture viewer 41PINBluetooth 31points of interestnding 9POI loader 50protecting your device 58public transitavoidances 23, 29city maps 29Rrecalculating routes 22recently found locations 14registering the device 3removing the mount 61renaming trips 41resettinghome location 14the max speed 26trip data 26routesoff road 24, 53stopping 23Ssafe mode 53satellite signals 6Saved Locations 15–16savingyour current location 15
nüvi 2405/2505 Series Owner’s Manual 69 school zone database 62screenbrightness 54screenshots 54settings 52–73softwareversion 57speech recognition 17storing the device 58system settings 53Ttext language 56time settings 56tools 34–39Track Up 25trafc 45–73activating a subscription 49adding trafc subscriptions 55icons 46incidents 47receiver 46trafcTrends 55trafc alerts 27transportation mode 6trip computer 28trip log 24enabling 57trip planner 40troubleshooting 63turn-by-turn directions 26turn list 26Uunit converter 43unit ID 57updatingmaps 3software 3USB 63user data, deleting 59Vvoice commandactivating 18navigating with 18tips for using 18wakeup phrase 18voice language 56voice mail 33volumeadjusting 4audio mixer 4automatic 5WWhere Am I? 34Where I've Beenenabling 57Where To? menu 8customizationshortcut icon, adding 8shortcut icon, removing 8world clock 42
815 69 55500 46 7744 5202000 33 1 5517 81 8943 (0) 3133 3181 00800-023393700 902 00 70 9700 358 19 311 0011-866-429-92960180 5 / 42 76 46 - 880 0180 5 / 42 76 46 - 55000800 4412 454 +44 2380 662 91500 32 2672 5254913-397-8200 1-800-800-102000 39 02 3669 969900 35 1214 447 46000 45 4810 50500808 2380000 +44 (0) 870.8501241© 2011 Garmin Ltd. or its subsidiarieswww�garmin�com/supportGarmin®, the Garmin logo, MapSource®, and nüvi® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. cityXplorer™, ecoRoute™, myGarmin™, nüMaps Guarantee™, nüMaps Lifetime™, nüviand trafcTrends™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. Windows® is a registered trademarks of Microsoft Corporation in the United States and/or other countries. Mac® is a registered trademark of Apple Computer, Inc. microSD™ is a trademark of SD-3C, LLC. Audible.com® and AudibleReady® are registered trademarks of Audible, Inc. © 1997–2005 Audible.Garmin International, Inc�1200 East 151st Street, Olathe, Kansas 66062, USAGarmin (Europe) Ltd�Liberty House, Hounsdown Business Park Southampton, Hampshire, SO40 9LR UKGarmin CorporationNo. 68, Zhangshu 2nd Road, Xizhi Dist. New Taipei City, 221, Taiwan (R.O.C.)

Navigation menu