Garmin 01926 LOW POWER TRANSMITTER (2400-2483.5 MHz) User Manual 2

Garmin International Inc LOW POWER TRANSMITTER (2400-2483.5 MHz) Users Manual 2

Contents

Users Manual 2

Download: Garmin 01926 LOW POWER TRANSMITTER (2400-2483.5 MHz) User Manual 2
Mirror Download [FCC.gov]Garmin 01926 LOW POWER TRANSMITTER (2400-2483.5 MHz) User Manual 2
Document ID1528915
Application IDmA6ChDyLFwApOZPKK5wyRw==
Document DescriptionUsers Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize195.49kB (2443633 bits)
Date Submitted2011-08-24 00:00:00
Date Available2011-08-24 00:00:00
Creation Date2011-08-04 10:31:18
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2011-08-04 10:31:28
Document TitleUsers Manual 2
Document CreatorAdobe InDesign CS4 (6.0.6)

nüvi 2405/2505 series
®
owner’s manual
models: 2405, 2415, 2445, 2455, 2475, 2495, 2515, 2545, 2555, 2565, 2595
August 2011
nüvi 2405/2505 Series Owner’s Manual 190-01355-00_0A
Printed in Taiwan
© 2011 Garmin Ltd. or its subsidiaries
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted,
disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of
Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic
storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic
or printed copy of this manual must contain the complete text of this copyright notice and provided further that any
unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Garmin reserves the right to change or improve its
products and to make changes in the content without obligation to notify any person or organization of such changes
or improvements. Go to the Garmin Web site (www.garmin.com) for current updates and supplemental information
concerning the use and operation of this and other Garmin products.
Table of Contents
Saving Locations.............................................. 16
Getting Started����������������������������������������� 1
About Voice Commands................................... 18
Connecting the Device to Vehicle Power............ 1
About myDashboard........................................... 2
About Sleep Mode.............................................. 4
Adjusting the Screen Brightness........................ 4
Adjusting the Volume.......................................... 4
About Automatic Volume.................................... 5
Status Bar Icons................................................. 5
Satellite Signals.................................................. 6
Using the On-screen Buttons............................. 7
Using the On-screen Keyboard.......................... 7
About Shortcuts.................................................. 8
Finding Locations������������������������������������ 8
About Locations.................................................. 9
About Search Tools.......................................... 11
Saving a Home Location.................................. 13
Finding Recently Found Places........................ 14
Finding Parking................................................. 14
nüvi 2405/2505 Series Owner’s Manual
Voice Command������������������������������������� 18
Navigation���������������������������������������������� 21
Starting a Route................................................ 21
Following an Automobile Route........................ 22
About Exit Services.......................................... 23
Avoiding Road Features................................... 24
Map Pages���������������������������������������������� 25
Customizing the Map........................................ 25
Viewing Turns................................................... 26
Pedestrian Routes............................................ 29
Hands-Free Phone Calls����������������������� 30
About Hands-Free Calling................................ 30
Placing a Call.................................................... 32
Using In-Call Options ...................................... 33
Saving a Home Phone Number........................ 34
Using the Apps�������������������������������������� 34
Viewing Current Location Information.............. 34
Using Help........................................................ 35
About ecoRoute . ............................................. 35
About Audiobooks............................................. 38
Planning a Trip.................................................. 40
Viewing Pictures............................................... 42
Viewing Previous Routes and Destinations...... 42
Using the World Clock ..................................... 43
Finding Your Last Parking Spot........................ 43
Converting Units . ............................................ 43
About Offers..................................................... 44
Using the Language Guide............................... 45
Traffic������������������������������������������������������ 46
Disabling Traffic................................................ 46
Traffic Data....................................................... 46
Traffic Receiver................................................ 47
Traffic on Your Route........................................ 48
Traffic in Your Area........................................... 49
Understanding Traffic Data............................... 49
ii
Traffic Subscriptions......................................... 49
Data Management���������������������������������� 50
File Types......................................................... 50
About Memory Cards........................................ 51
Transferring Files from Your Computer ........... 51
Deleting Files . ................................................. 52
Customizing the Device������������������������ 52
Map and Vehicle Settings................................. 52
Navigation Settings........................................... 53
Display Settings................................................ 54
Bluetooth Settings............................................ 55
Traffic Settings.................................................. 56
Units and Time Settings................................... 56
Language and Keyboard Settings.................... 57
Proximity Alerts Settings................................... 57
About Device and Privacy................................ 57
Restoring Settings............................................ 58
nüvi 2405/2505 Series Owner’s Manual
Appendix������������������������������������������������ 58
Power Cables................................................... 58
Caring for Your Device...................................... 58
Erasing User Data............................................ 59
Changing the Fuse in the Vehicle Power
Cable................................................................ 60
Mounting on Your Dashboard........................... 61
Removing the Device, Cradle, and Mount........ 61
Updating Maps ................................................ 62
Purchasing Additional Maps............................. 62
Custom Points of Interest................................. 62
Purchasing Accessories................................... 63
Troubleshooting . ............................................. 64
Index������������������������������������������������������� 66
nüvi 2405/2505 Series Owner’s Manual
iii
Getting Started
‹ WARNING
 ee the Important Safety and Product
Information guide in the product box for product
warnings and other important information.
1 Connect the device to vehicle power
(page 1).
2 Mount the device (page 1).
3 Register the device (page 3).
4 Check for updates.
• Software updates (page 3).
• Free map update (page 3).
nüvi 2405/2505 Series Owner’s Manual
Connecting the Device to Vehicle
Power
‹ WARNING
This product contains a lithium-ion battery.
To prevent the possibility of personal injury or
product damage caused by battery exposure
to extreme heat, remove the device from the
vehicle when exiting or store it out of direct
sunlight.
Before you use your device on battery power,
you should charge it.
1 Plug the vehicle power cable ➊ into the
USB port on the device ➋.
2 Snap the mount ➌ onto the suction cup ➍.
3 Press the suction cup to the windshield, and
flip the lever ➎ back toward the windshield.
4 Fit the bottom of your device into the mount.
5 Tilt your device back until it snaps into place.
About myDashboard
➍
Use myDashboard to register your device, check
for software and map updates, access product
manuals and support, and more.
➌
➊
➋
➎
Setting Up myDashboard
1 Connect the USB cable ➊ to the USB port
➋ on the device.
6 Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
7 If necessary, connect the external antenna
to the traffic receiver and secure it to the
windshield using the suction cups.
➊
➋
2 Connect the USB cable to the USB port on
your computer.
3 Go to www.garmin.com/dashboard.
4 Follow the on-screen instructions.
2
nüvi 2405/2505 Series Owner’s Manual
Registering the Device
1 Open myDashboard (page 2).
2 Follow the on-screen instructions.
Updating the Software
1 Open myDashboard (page 2).
2 Under Software Updates, click Update Now.
3 Follow the on-screen instructions.
nüMaps Guarantee
™
If you register through myDashboard, your
device could be eligible for one free map update
within 90 days of first acquiring satellites while
you drive. Go to www.garmin.com/numaps for
details and terms and conditions.
Updating Maps
1 Open myDashboard (page 2).
2 Register the device (page 3).
3 Under Map Updates, click Update Now.
4 Follow the on-screen instructions.
Turning Off the Device
You can power off the device completely.
1 Hold the Power key ➊ for 3 seconds.
➊
NOTE: If you hold the Power key for less
than 3 seconds, the device enters sleep
mode (page 4).
2 Select Off.
nüvi 2405/2505 Series Owner’s Manual
Resetting the Device
You can reset your device if it stops functioning.
Hold the Power key for 10 seconds.
About Sleep Mode
Use sleep mode to conserve battery power
when your device is not in use. Sleep mode
uses very little power, and a battery charge lasts
for weeks when your device is in sleep mode.
Entering Sleep Mode
Press the Power key.
Exiting Sleep Mode
While the device is in sleep mode, Press the
Power key and double-tap .
4
nüvi 2405/2505 Series Owner’s Manual
Adjusting the Screen Brightness
1 Select Settings > Display > Brightness.
2 Use the slider bar to adjust the brightness.
Adjusting the Volume
1 Select Volume.
2 Select an option:
•
•
•
Use the slider bar to adjust the volume.
Select
to mute the device.
Select
> Audio Mixer and use the
slider bars to adjust the volume for
navigation prompts, phone, and media.
nüvi 2405/2505 Series Owner’s Manual
About Automatic Volume
NOTE: Automatic volume is not available on all
models.
Your device can increase or decrease the
volume automatically based on the level of
background noise.
Enabling Automatic Volume
1 Select Volume > > Automatic Volume.
2 Select Enabled.
Status Bar Icons
The status bar is located at the top of the main
menu. The status bar icons display information
about features on the device. You can select
some icons to change settings or view additional
information.
GPS signal status.
Bluetooth® technology status (appears
when Bluetooth is enabled). See (page 31)
Transportation mode indicator.
Satellite Signals
After the device is turned on, it begins acquiring
satellite signals. The device may need a clear
view of the sky to acquire satellite signals. When
at least one of the
bars is green, your
device has acquired satellite signals.
For more information about GPS, go to
www.garmin.com/aboutGPS.
Viewing GPS Signal Status
Hold
for three seconds.
Current time.
Battery status.
6
nüvi 2405/2505 Series Owner’s Manual
Transportation Modes
Automobile mode
Pedestrian mode
Routing and navigation are calculated differently
based on your transportation mode.
For example, in Automobile mode, the estimated
time of arrival is calculated using the speed
limit of the roads on the route. Pedestrian mode
calculates time of arrival based on walking
speed.
NOTE: Pedestrian routes do not include
highways. If you have cityXplorer™ maps loaded
on your device, pedestrian routes may include
public transit (page 30).
Choosing a Transportation Mode
Select
or .
nüvi 2405/2505 Series Owner’s Manual
Battery Information
After the device is connected to power, it begins
to charge.
in the status bar indicates the status of the
internal battery. To increase the accuracy of the
battery gauge, you should fully discharge the
battery and then fully charge it. Do not unplug
the device until it is fully charged.
Using the On-screen Buttons
•
•
•
•
•
Select
to return to the previous screen.
Hold
to quickly return to the main menu.
Select or
to see more choices.
Hold or
to scroll faster.
Select
to see a menu of options for the
current screen.
Using the On-screen Keyboard
See “Language and Keyboard Settings” to
change the keyboard layout (page 57).
• Select a character on the keyboard to enter
a letter or number.
• Select
to add a space.
• Select
to delete an entry.
• Select
to delete a character.
• Hold
to erase the entire entry.
• Select
to select the keyboard language
mode.
• Select
to enter special characters,
such as punctuation marks.
• Select
to change character
capitalization.
8
About Shortcuts
You can add shortcuts to the Where To? menu.
A shortcut can point to a location, a category, or
a search tool.
Adding a Shortcut Icon
The Where To? menu can contain up to 36
shortcut icons.
1 Select Where To? > Add Shortcut.
2 Select an item.
Removing a Shortcut
1 Select Where To > > Remove
Shortcut(s).
Select
the shortcut to remove.
3 Select the shortcut again to confirm.
nüvi 2405/2505 Series Owner’s Manual
Finding Locations
The device offers many methods for finding
locations.
• By category (page 9)
• Near another location (page 11)
• By spelling the name (page 12)
• By address (page 12)
• Using the map (page 13)
• Using recently found locations (page 14)
• Using coordinates (page 13)
• Using photos (page 15)
• Using saved locations (page 16)
nüvi 2405/2505 Series Owner’s Manual
About Locations
The detailed maps loaded in your device contain
locations, such as restaurants, hotels, and auto
services. You can use the Categories function to
browse for nearby businesses and attractions.
Finding a Location by Category
1 Select Where To?.
2 Select a category, or select Categories.
3 If necessary, select a subcategory.
4 Select a location.
Searching Within a Category
To narrow your search results, you can search
within some categories.
1 Select Where To?.
2 Select a category, or select Categories.
3 If necessary, select a subcategory.
4 Select the search bar ➊.
➊
5 Enter all or part of the name.
6 Select
Finding a Location Using the Search Bar
You can use the search bar to search for
locations by entering a category, brand name,
address, or city name.
1 Select Where To?.
2 Select the search bar.
3 Enter a search term.
Suggested search terms appear below the
search bar as you type.
• To search for a type of business, enter a
category name, such as “movie theaters”
or “coffee shops.”
10
•
To search for a business by name, enter
all or part of the name.
• To search for an address near you, enter
the street number and street name.
• To search for an address in another city,
enter the street number, street name,
city, and state.
• To search for a city, enter the city and
state.
• To search for coordinates, enter latitude
and longitude coordinates.
4 Select an option:
• To search using a suggested search
term, select the term.
• To search using the text you entered,
select .
5 If necessary, select a location.
nüvi 2405/2505 Series Owner’s Manual
Changing the Search Area
By default, your device finds locations closest
to your current location. You can find a location
near another city or location.
1 Select Where To? > Searching Near.
2 Select an option.
3 If necessary, select a location.
Reporting a Closed or Missing Location
If your search results include an outdated or
incorrect location, you can report the error to
Garmin and remove the location from future
searches.
1 Find a location (page 9).
2 Select a location from the list.
3 Select .
4 Select Edit.
5 Select Report as Closed or Report as
Missing.
nüvi 2405/2505 Series Owner’s Manual
This information is sent to Garmin when you
connect your device to myGarmin™ using your
computer.
Editing Location Information
You can change the address or phone number
for a location that appears in the search results.
1 Find a location (page 9).
2 Select a location from the list.
3 Select .
4 Select Edit.
5 Select Address or Phone Number, and
enter the new information.
Rating a Point of Interest
You can assign a star rating to a point of
interest.
1 Find a location (page 9).
2 Select .
3 Select the stars to rate the point of interest.
11
The star rating updates on your device.
About Search Tools
Search tools allow you to search for cities,
addresses, intersections, or coordinates. By
default, the address search tool appears in
the Where To? menu. To search for cities,
intersections, and coordinates, you must add
those search tools to the Where To? menu
(page 8).
Finding an Address
NOTE: The order of the steps may change
depending on the map data loaded on your
device.
1 Select Where To? > Address.
2 Enter information as prompted by the onscreen instructions.
3 If necessary, select Searching Near, and
enter a different city or postal code.
12
4 If necessary, select the address.
Finding a City
Before you can find a city, you must add the city
search tool to the Where To? menu (page 8).
1 Select Where To? > Cities
2 Select Enter Search.
3 Enter a city name, and select
4 Select a city.
Finding an Intersection
Before you can find an intersection, you must
add a shortcut to the intersection search tool
(page 8).
1 Select Where To? > Intersections.
2 Select a state or province.
NOTE: If necessary, select State or Country
to change the country, state, or province.
3 Enter the first street name, and select Next.
4 If necessary, select the street.
nüvi 2405/2505 Series Owner’s Manual
5 Enter the second street name, and select
Next.
6 If necessary, select the street.
7 If necessary, select the intersection.
Finding a Location Using Coordinates
You can find a location using latitude and
longitude coordinates. This method can be
helpful when geocaching.
1 Select Where To? > Categories >
Coordinates.
2 If necessary, select > Format, select the
correct coordinate format for the type of map
you are using, and select Save.
3.	 Select the latitude coordinate.
4 Enter the new coordinate, and select Done.
5 Select the longitude coordinate.
6 Enter the new coordinate, and select Done.
7 Select View on Map.
nüvi 2405/2505 Series Owner’s Manual
Finding a Location by Browsing the Map
Before you can find places included in the map
data, such as restaurants, hospitals, and fuel
stations, you must enable the map layer for
places along the road (page 25).
1 Select View Map.
2 Select the screen.
3 Drag and zoom the map to display the area
to search.
Location markers appear on the map for
places along the road.
4 If necessary, select , and select a
category icon to view only a specific
category of places.
5 Select an option:
• Select a location marker.
• Select a point, such as a street,
intersection, or address location.
13
6 If necessary, select the location description
to view additional information.
Finding a Location Using Quick Search
After you have performed a search for a point
of interest, certain categories may display a
Quick Search list that displays the last four
destinations you selected.
1 Select Where To?.
2 Select a category, or select Categories.
3 If applicable, select a destination from the
Quick Search list.
4 If necessary, select the appropriate
destination.
Saving a Home Location
You can set your home location for the location
you return to most often.
1 Select Where To? > > Set Home
Location.
14
2 Select Enter My Address, Use My Current
Location, or Recently Found.
The location is saved as “Home” in the Saved
folder (page 16).
Going Home
Select Where To? > Go Home.
Editing Your Home Location Information
1 Select Where To? > Saved > Home.
2 Select > Edit.
3 Enter your changes.
4 Select Done.
Finding Recently Found Places
Your device stores the last 50 locations you
have found.
1 Select Where To? > Recent.
2 Select a location.
nüvi 2405/2505 Series Owner’s Manual
Clearing the List of Recently Found Places
Select Where To? > Recent >
> Clear
> Yes.
Finding Parking
You can find detailed parking information and
pricing information.
1 Select Where To? > Categories > Parking.
2 Select an option.
3 Select a parking location.
Using Photo Navigation
You can upload pictures onto your device or
memory card that include location information
and create routes to the pictured locations.
1 Connect your device to your computer (page
52).
2 Go to http://connect.garmin.com/photos.
3 Follow the instructions on the Web site to
select and load pictures.
nüvi 2405/2505 Series Owner’s Manual
4 Disconnect the device from the computer.
5 Turn on the device.
6 From the main menu, select Where To? >
Saved > Photos.
A list of pictures with location information
appears.
7 Select a picture.
Setting a Simulated Location
If you are indoors or not receiving satellite
signals, you can use the GPS to set a simulated
location.
1 Select Settings > Navigation.
2 Select GPS Simulator.
3 Select View Map.
4 Select an area on the map.
The address of the location appears at the
bottom of the screen.
5 Select the address.
15
6 Select Set Location.
Saving Locations
You can save locations so you can quickly find
them and create routes to them.
Saving a Location
1 Find a location (page 9).
2 Select a location from the list.
3 Select .
4 Select Save.
5 If necessary, enter a name, and select Done.
16
nüvi 2405/2505 Series Owner’s Manual
Saving Your Current Location
1 From the map, select the vehicle icon.
2 Select Save.
3 Enter a name, and select Done.
4 Select OK.
Starting a Route to a Saved Location
1 Select Where To? > Saved.
2 If necessary, select a category, or select All
Categories.
3 Select a location.
4 Select Go!.
nüvi 2405/2505 Series Owner’s Manual
Editing a Saved Location
1 Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select Edit.
6 Select an option:
Select Name.
Select Phone Number.
To assign categories to the Favorite,
select Categories.
• To save a photo with the Favorite, select
Assign Photo (page 42).
• To change the symbol used to mark the
Favorite on a map, select Change Map
Symbol.
7 Edit the information.
8 Select Done.
•
•
•
17
Assigning Categories to a Saved
Location
You can add custom categories to organize your
saved locations.
NOTE: Categories appear in the saved locations
menu after you have saved more than 12
locations.
1 Select Where To? > Saved.
2 Select a location.
3 Select .
4 Select Edit > Categories.
5 Enter one or more category names,
separated by commas.
Suggested categories appear below the text
bar as you type. You can select a suggested
word to use the suggestion.
6 Select Done.
18
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Where To? > Saved.
2 Select > Delete Saved Places.
3 Select the box next to the saved locations to
delete, and select Delete.
Voice Command
About Voice Commands
NOTE: Voice Command is not available on all
models, or for all languages and regions.
Voice Command allows you to use your device
by saying words and commands. The Voice
Command menu provides voice prompts and a
list of available commands.
nüvi 2405/2505 Series Owner’s Manual
Setting your Wakeup Phrase
The wakeup phrase is a word or phrase you can
say to activate Voice Command. The default
wakeup phrase is Voice Command.
TIP: You can reduce the chance of accidental
Voice Command activation by using a strong
wakeup phrase.
1 Select Apps > Voice Command >
Customize Phrase.
2 Enter a new wakeup phrase.
The device indicates the strength of the
wakeup phrase as you enter the phrase.
3 Select Done.
Activating Voice Command
Say your wakeup phrase.
The Voice Command menu appears.
nüvi 2405/2505 Series Owner’s Manual
Voice Command Tips
•
•
•
•
•
Speak in a normal voice directed at the
device.
Reduce background noise, such as voices
or the radio, to increase the accuracy of the
voice recognition.
Speak commands as they appear on the
screen.
Respond to voice prompts from the device
as needed.
Increase the length of your wakeup phrase
to reduce the chance of accidental Voice
Command activation.
Starting a Route Using Voice Command
You can say the names of popular, well-known
locations.
1 Say your wakeup phrase.
2 Say Find Place.
19
3 Listen for the voice prompt, and speak the
name of the location.
A list of locations appears.
5 Say Navigate.
Finding an Address
1 Say Voice Command.
2 Speak the entire address.
4 Say the line number.
20
nüvi 2405/2505 Series Owner’s Manual
Navigation
Muting Instructions
You can disable the voice prompts for Voice
Command without muting the device.
1 Select Apps > Voice Command > .
2 Select Mute Instructions > Enabled.
Disabling Voice Command
You can disable Voice Command, which
prevents you from accidentally activating Voice
Command while speaking.
1 Select Apps > Voice Command > .
2 Select Voice Command > Disabled.
nüvi 2405/2505 Series Owner’s Manual
Starting a Route
Search for a location (page 9).
Select a location.
Select Go!.
If necessary, select an option.
• Select Drive.
• Select Walk.
• Select Public Transit to calculate a route
that combines public transit and walking.
NOTE: You must have cityXplorer™ maps
loaded to navigate using public transit
(page 30).
5 If necessary, select a route.
21
Starting a Route to a Saved Location
1 Select Where To? > Saved.
2 If necessary, select a category, or select All
Categories.
3 Select a location.
4 Select Go!.
Using Multiple Route Preview
1 Search for a location.
2 Select a location.
3 Select Routes and, if necessary, select
Following an Automobile Route
The route is marked with a magenta line. A
checkered flag marks your destination.
As you travel, the device guides you to the
destination with voice prompts, arrows on the
map, and directions at the top of the map. If
you depart from the original route, the device
recalculates the route and provides new
directions.
Drive (page 9).
A map appears with Faster Time, Shorter
Distance, and Less Fuel routes highlighted.
3 Use the on-screen buttons to select a route
4 Select Go!.
22
nüvi 2405/2505 Series Owner’s Manual
Using the Automobile Navigation Map
While navigating in Automobile mode, you can
select map features.
1 Select the map.
Map icons appear.
2.	 Select an option:
• To view different parts of the map, drag
the screen.
• To zoom in and out, select
or .
• To rotate the map view, select
• To switch from North Up to 3D view,
select .
• To add or remove map layers, select
nüvi 2405/2505 Series Owner’s Manual
Adding a Point to a Route
Before you can add a stop to a route, you must
be navigating a route in Automobile mode.
1 While navigating a route, select to return
to the main menu.
2 Select Where To?.
3 Search for the location (page 9).
4 Select Go!.
5 Select Add to Active Route.
Taking a Detour
While navigating an automobile route, you can
use detours to avoid obstacles ahead of you,
such as construction zones.
NOTE: If the route you are currently navigating
is the only reasonable option, your device might
not calculate a detour.
From the map, select > Detour.
23
Stopping the Route
From the map, select
• To view nearby restaurants, select .
• To view nearby lodging, select .
• To view nearby restrooms, select .
4 Select a point of interest.
About Exit Services
While you navigate a route, you can find gas,
food, lodging, and restrooms near upcoming
exits.
Services are listed under tabs by category.
Avoiding Road Features
1 Select Settings > Navigation >
Navigating to an Exit
> Exit Services.
1 From the map, select
2 Use and to select an exit.
> Go!.
3 Select
Finding Exit Services
> Exit Services.
1 From the map, select
2 Use and to select an upcoming exit.
3 Select an exit service tab.
•
24
To view nearby gas stations, select
Avoidances.
2 Select the road features to avoid on your
routes, and select Save.
Avoiding Transit Types
NOTE: Transit types are available when
cityXplorer maps are loaded (page 30).
1 Select Settings > Navigation > Public
Transit.
2 Select the transit type to avoid on your
routes.
3 Select Save.
nüvi 2405/2505 Series Owner’s Manual
Navigating Off Road
If you are not following roadways as you
navigate, you can use Off Road mode.
1 Select Settings > Navigation.
2 Select Calculation Mode > Off Road >
Save.
The route will be calculated as a straight line
to the location.
Map Pages
Customizing the Map
Customizing the Map Layers
You can customize which data appear on the
map, such as icons for points of interest and
road conditions.
1 From the map, select .
2 Select Map Layers.
3 Select which layers you want to include on
the map, and select Save.
Viewing the Trip Log
Your device keeps a trip log, which is a record of
the path you have traveled.
1 Select Settings > Map and Vehicle > Map
Layers.
2 Select the Trip Log check box.
nüvi 2405/2505 Series Owner’s Manual
25
Changing the Map Data Field
1 From the map, select the data field in the
lower left-hand corner.
2 Select a type of data to display.
3 Select Save.
Changing the Map Perspective
1 Select Settings > Map and Vehicle >
Driving Map View.
2 Select an option:
•
•
•
26
Select Track Up to display the map in
two dimensions (2-D), with your direction
of travel at the top.
Select North Up to display the map in
2-D with North at the top.
Select 3-D to display the map in three
dimensions.
Changing the Tools on the Map
Map tools appear as buttons on the map, which
provide quick access to device functions. For
example, you can add a button to take a detour,
adjust the brightness, or view exit services. You
can select up to three tools to display on the
map.
1 From the main menu, select Settings > Map
and Vehicle > Map Buttons.
2 Select an option:
• To add a tool, select
, and select a
tool.
• To remove a tool, select the tool, and
select Remove.
• To reset to the default tools, select Reset
to Defaults.
3 Select Save.
nüvi 2405/2505 Series Owner’s Manual
Changing the Map Dashboard
1 Select Settings > Map and Vehicle >
Dashboards.
2 Use the arrows to select a dashboard.
3 Select Save.
Viewing a List of Turns
When you are navigating a route, you can view
all of the turns and maneuvers for your entire
route and the distance between turns.
1 Select the text bar on the top of the map.
Viewing Turns
Resetting Trip Information
1 From the map, select Speed > .
2 Select an option:
• When not navigating a route, select
Reset All to reset every data field,
except the speedometer, on the page.
• Select Reset Trip Data to reset the
information on the trip computer.
• Select Reset Max. Speed to reset the
maximum speed.
• Select Reset Trip B to reset the
odometer.
nüvi 2405/2505 Series Owner’s Manual
2 Select a turn.
The details for the turn appear. If available,
an image of the junction appears for
junctions on major roadways.
Viewing the Entire Route on the Map
1 While navigating an automobile route, select
the navigation bar at the top of the map.
2 Select > Map.
27
Viewing the Next Turn
While navigating an automobile route, a preview
of the next turn, lane change, or other maneuver
appears in the upper-left corner of the map.
The preview includes the distance to the turn or
maneuver and the lane in which you should be
traveling, if available.
From the map, select
to view the next
turn on the map.
Viewing Junctions
While navigating an automobile route, you can
view the junctions on major roadways. When
you approach a junction in a route, the image of
that junction appears briefly, if available.
From the map, select
to view the
junction, if available.
Viewing Traffic Alerts
While you navigate an automobile route, a traffic
alert may appear in the navigation bar.
Select the alert to view more information.
28
nüvi 2405/2505 Series Owner’s Manual
Viewing Trip Information
The trip information page displays your present
speed and provides statistics about your trip.
TIP: If you make frequent stops, leave the
device turned on so it can accurately measure
elapsed time during the trip.
From the map, select the Speed field.
Pedestrian Routes
Following a Pedestrian Route
In Pedestrian mode, your route is displayed on a
two-dimensional map.
➊
➌
•
•
•
•
nüvi 2405/2505 Series Owner’s Manual
➋
➊
❹
Select ➊ to switch between sections of the
route.
Select ➋ to view the route itinerary.
Select ➌ to center the map on your current
location.
Select ➍ to zoom in and zoom out.
29
About the Pedestrian Position Icon
When you are navigating in Pedestrian mode,
indicates your approximate position and your
direction of travel on the map.
The circle around indicates the accuracy of
your position on the map. A smaller circle means
the displayed position is more accurate.
Public Transit Options
If you have cityXplorer maps installed,
the device calculates a route that uses a
combination of public transit options, such as
riding a bus or subway, and walking.
NOTE: cityXplorer maps are not included
with the device. See http://my.garmin.com to
purchase cityXplorer maps.
The yellow icons indicate the navigation method
used in each section of the route. For example,
when you see , board a bus at that point in
the route.
30
The black dots on the map are public transit
stops along your route.
NOTE: You can change the types of public
transit and limit the distance spent walking
during a pedestrian route (page 54).
Enabling Transit Types
NOTE: Transit types are available when
cityXplorer maps are loaded (page 30).
1 Select Settings > Navigation > Public
Transit.
2 Select the transit type to include in your
routes, and select Save.
nüvi 2405/2505 Series Owner’s Manual
Hands-Free Phone Calls
About Hands-Free Calling
Using Bluetooth® wireless technology, your
device can connect to your mobile phone to
become a hands-free device. To determine
whether your mobile phone with Bluetooth
technology is compatible with your device, go to
www.garmin.com/bluetooth.
Your phone may not support all of the handsfree phone features your device provides.
Enabling Bluetooth Wireless Technology
1 Select Settings > Bluetooth.
2 Select Bluetooth.
nüvi 2405/2505 Series Owner’s Manual
Pairing Your Phone
Before you can use hands-free calling, you
must pair your device with a compatible mobile
phone. Pairing your phone with your device
allows your phone and device to recognize each
other and connect quickly.
1 Place your phone and your device within
33 ft. (10 m) of each other.
2 On your device, enable Bluetooth wireless
technology (page 31).
3 Select an option:
• Select Add Phone.
• If you have already paired a different
phone, select Phone > .
4 On your phone, enable Bluetooth wireless
technology.
5 On your device, select OK.
A list of nearby Bluetooth devices appears.
31
6 Select your phone from the list, and select
OK.
7 If necessary, on your phone, confirm that the
device is allowed to connect.
8 If necessary, enter the device Bluetooth PIN
(1234) into your phone.
Disconnecting Your Phone
1 Select Settings > Bluetooth.
2 Select Phone > None > Save.
Your phone is disconnected from your device but
remains paired with your device.
Tips After Pairing the Devices
•
•
32
After the initial pairing, the two devices can
connect automatically each time you turn
them on.
When your phone is connected to your
device, you can make phone calls.
•
•
When you turn on the device, it tries to
connect to the last phone to which it was
connected.
You might have to set your mobile phone to
connect to the device automatically when it
is turned on.
Receiving a Call
When you receive a call, select an option:
• Select Answer.
• Select Ignore to ignore the call.
Placing a Call
Dialing a Number
1 Select Phone > Dial.
2 Enter the number.
3 Select Dial.
nüvi 2405/2505 Series Owner’s Manual
Calling a Contact in Your in your Phone
Book
Your phone book is loaded from your phone to
the device each time your phone and the device
connect. It may take a few minutes for the phone
book to be available. Some phones do not
support this feature.
1 Select Phone > Phone Book.
2 Select a contact.
3 Select Call.
Calling a Point of Interest
1 Select Phone > Browse Categories.
2 Select a point of interest (page 9).
3 Select Call.
nüvi 2405/2505 Series Owner’s Manual
Using the Call History
Your call history is loaded from your phone to
the device each time your phone and the device
connect. It may take a few minutes for the call
history to be available. Some phones do not
support this feature.
1 Select Phone > Call History.
2 Select a category.
A list of calls appears, with the most recent
calls at the top.
3 Select a call.
33
Using In-Call Options
1 While on a call, select
2 Select an option:
•
•
•
•
34
To transfer audio to your phone, select
Handset.
TIP: You can use this feature if you want
to turn off your device and remain on the
call, or if you need privacy.
To display a keypad, select Keypad.
TIP: You can use this feature to use
automated systems, such as voice mail.
To mute the microphone, select Mute.
To hang up, select End Call.
Saving a Home Phone Number
TIP: After you save a home number, you can
edit the home number by editing “Home” in
Saved page 16.
Select Phone >
> Set Home Number,
enter your phone number, and select Done.
Calling Home
Before you can call home using the Call Home
button, you must enter a phone number for your
home location.
Select Phone > Call Home.
nüvi 2405/2505 Series Owner’s Manual
Using the Apps
Viewing Current Location
Information
Use the Where Am I? page to view information
about your current location. This feature is
helpful if you need to tell emergency personnel
your location.
Select Apps > Where Am I?.
Finding Nearby Services
1 Select Apps > Where Am I?.
2 Select Hospitals, Police Stations, or Fuel
to view the nearest locations in that category.
nüvi 2405/2505 Series Owner’s Manual
Using Help
Select Apps > Help to view information
about using the device.
Searching Help Topics
Select Apps > Help >
About ecoRoute
The ecoRoute™ feature calculates the fuel
economy and the fuel price of navigating to a
destination, and offers tools for improving fuel
efficiency.
The data provided by the ecoRoute feature is an
estimate only. The data is not actually read from
the vehicle, unless you are using the ecoRoute
HD accessory. To receive more-accurate fuel
reports for your specific vehicle and driving
habits, calibrate the fuel economy (page 36).
35
ecoRoute HD Accessory
When connected to the ecoRoute HD accessory,
your device can receive real-time vehicle
information, such as error messages, RPM, and
battery voltage. Your device includes data read
from the vehicle by the ecoRoute HD accessory
when calculating ecoRoute data.
Go to www.garmin.com/ecoroute for
compatibility and purchasing information.
Setting up the Vehicle Profile
The first time you use the ecoRoute features,
you must enter vehicle information.
1 Select Apps > ecoRoute™.
2 Enter fuel and mileage information.
Changing the Fuel Price
1 Select Apps > ecoRoute™ > At the Pump.
2 Enter the current price of fuel, and select
Next.
36
3 Select Yes.
Calibrating the Fuel Economy
You can calibrate the fuel economy to receive
more-accurate fuel reports for your specific
vehicle and driving habits. You should calibrate
when you fill up your fuel tank.
1 Select Apps > ecoRoute™ > At the Pump.
2 Enter the current fuel price.
3 Enter the amount of fuel the vehicle has
used since the last time the fuel tank was
filled.
4 Enter the distance you have travelled since
the last time the fuel tank was filled.
5 Select Next.
The device calculates the average vehicle
fuel economy.
6 Select Save.
nüvi 2405/2505 Series Owner’s Manual
About the ecoChallenge
ecoChallenge helps you maximize the vehicle
fuel economy by scoring your driving habits. The
higher your ecoChallenge scores, the more fuel
you have saved. The ecoChallenge collects data
and calculates a score whenever your device is
moving and in Automobile mode.
Viewing ecoChallenge Scores
• View your current score in the
ecoChallenge icon on the map.
• Select
to view detailed scores.
About the ecoChallenge Score
• Current—displays the score for your current
driving activity.
• Overall—displays an average of the speed,
acceleration, and braking score.
nüvi 2405/2505 Series Owner’s Manual
•
•
•
Speed—displays your score for driving your
vehicle at the optimal speed for conserving
fuel (45–60 mph for most vehicles).
Acceleration—displays your score for
smooth and gradual acceleration. You lose
points for rapid acceleration.
Braking—displays your score for smooth
and gradual braking. You lose points for hard
braking.
Removing the ecoChallenge Score From the
Map
Select
> Settings > Hide > Save.
Resetting the ecoChallenge Scores
1 Select Apps > ecoRoute > Vehicle Profile.
2 Select Reset.
37
Viewing Fuel Economy Information
You can view your fuel consumption, your total
fuel cost, and your average fuel economy.
1 Select Apps > ecoRoute > Fuel Economy.
2 Select a section of the graph to zoom in.
Mileage Reports
Mileage reports provide the distance, the time,
the average fuel economy, and the fuel cost of
navigating to a destination.
A mileage report is created for every route that
you drive. If you stop a route on the device, a
mileage report is created for the distance you
traveled.
38
Viewing a Mileage Report
You can view saved mileage reports on the
device.
TIP: You can access mileage reports in the
Reports folder on the device drive or volume
(page 52).
1 Select Apps > ecoRoute™ > Mileage
Report.
2 Select a report.
Resetting ecoRoute Information
1 Select Apps > ecoRoute™ > Vehicle
Profile.
2 Select
> Reset.
nüvi 2405/2505 Series Owner’s Manual
About Audiobooks
The device can play audiobooks from Audible.
com. This feature requires a subscription to
Audible.com. Go to www.audible.com/garmin to
activate a free 30-day trial subscription.
Loading Audiobooks onto Your Device
Before you can load audiobooks onto your
device, you must subscribe to Audible.com.
Go to www.audible.com/garmin for more
information.
1 Connect your device to your computer (page
2).
2 On your computer, log in your Audible.com
account.
3 Follow the instructions from Audible.com.
nüvi 2405/2505 Series Owner’s Manual
Playing an Audiobook
1 Select Apps > Audible.
2 Select Browse.
3 Select an option:
• Select Titles.
• Select Authors.
• Select Narrators.
4 Select a book.
5 Select an option to control playback.
• To add a bookmark, select .
• To pause playback, select .
• To resume playback, select .
• To move quickly forward or backward in
the book, use the slider bar at the top of
the page.
• To go to the next chapter, select
• To go to the previous chapter, select
39
•
•
To fast forward, hold
To rewind, hold
Adding a Bookmark
When you play an audiobook, the player
automatically resumes the audiobook from
the point where you last stopped. You can
add a bookmark to mark a certain spot in the
audiobook.
While playing an audiobook, select > Add
Bookmark.
Resuming Playback from a Bookmark
1 While playing an audiobook, select .
2 Select a bookmark.
40
Renaming a Bookmark
By default, the device names a bookmark
using the time stamp of the bookmark. You can
rename a bookmark.
1 While playing an audiobook, select >
> Rename Bookmarks.
2 Select a bookmark.
3 Enter a name, and select Done.
Deleting a Bookmark
1 While playing an audiobook, select
> Delete Bookmarks.
2 Select a bookmark.
nüvi 2405/2505 Series Owner’s Manual
Planning a Trip
You can use the trip planner to create and save
a trip with multiple destinations.
1 Select Apps > Trip Planner.
2 Select .
3 Select Select Start Location.
4 Search for a location (page 9).
5 Select Select.
6 To add additional locations, select .
7 Select Next.
8 Enter a name, and select Done.
Editing a Trip Itinerary
1 Select Apps > Trip Planner.
2 Select a saved trip.
nüvi 2405/2505 Series Owner’s Manual
➋
➊
3 Select an option:
• Select ➊ to change the arrival or
•
•
•
departure time.
Select ➊ > Duration to record how long
you will stay at a location.
Select ➋ to change the transportation
mode or route preference for that portion
of the trip.
Select Map to view the trip on the map.
41
Navigating to a Saved Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select Go!.
4 If prompted, select a route (page 22).
Editing a Saved Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select .
4 Select an option:
•
•
•
•
42
Select Rename Trip.
Select Edit Destinations to add and
delete locations, or to change the order
of locations.
Select Delete Trip.
Select Optimize Order to arrange the
stops on your trip in the most-efficient
order.
Viewing Pictures
View pictures that you have stored in the device
or on a memory card. See (page 51) for more
information about loading pictures on the device.
1 Select Apps > Picture Viewer.
2 Use the arrows to scroll through the images.
3 Select a picture.
Viewing a Slideshow
1 Select Apps > Picture Viewer.
2 Select .
While a slideshow is playing, you can select
the screen to stop the slideshow.
Setting a Picture as Wallpaper
1 Select Apps > Picture Viewer.
2 Select a picture.
3 Select > Set as Wallpaper.
nüvi 2405/2505 Series Owner’s Manual
4 Use the on-screen buttons to adjust the
wallpaper.
5 Select Save.
Deleting Pictures
1 Select Apps > Picture Viewer.
2 Select a picture.
3 Select > Delete > Yes.
Viewing Previous Routes and
Destinations
Before you can use this feature, you must
enable the travel history feature (page 58).
Your can view your previous routes and places
you have stopped on the map.
Select Apps > Where I’ve Been.
nüvi 2405/2505 Series Owner’s Manual
Using the World Clock
1 Select Apps > World Clock.
2 If necessary, select a city, enter a city name,
and select Done.
Viewing the World Map
Select Apps > World Clock > .
Nighttime hours appear in the shaded area
of the map.
Finding Your Last Parking Spot
When you remove your device from the vehicle
mount while the device is on, your current
location is saved as a parking spot.
Select Apps > Last Spot.
43
Using the Calculator
Select Apps > Calculator.
Converting Units
1 Select Apps > Unit Converter.
2 If necessary, select the button next to
Convert, select a measurement category,
and select Save.
3 If necessary, select a unit button, select a
unit of measurement, and select Save.
4 Select the field below the unit you want to
convert.
5 Enter the number, and select Done.
Setting Currency Conversion Rates
Manually
You can update the currency conversion rates
manually so that you are always using the mostcurrent rates.
1 Select Apps > Unit Converter.
44
2 Select the button next to Convert.
3 Select Currency, then select Save.
4 If necessary, select a currency button, select
a different currency, and select Save.
5 Select the button at the bottom of the screen
that displays the currency conversion rate.
6 Select the box next to a currency.
7 Enter a value, and select Done.
8 Select OK.
About Offers
If your device package includes a traffic receiver,
you will receive location-relevant offers and
coupons. Ad-based traffic information is only
available in North America.
NOTE: The traffic receiver must be connected to
external power and you must be in a coverage
area to receive ad-based traffic information.
nüvi 2405/2505 Series Owner’s Manual
See our privacy statement at www
.garmin.com/privacy/ to view our privacy
information.
Viewing Offers
‹ CAUTION
Do not attempt to write down the coupon codes
while driving.
1 Select an offer that appears on the screen to
search for the nearest location related to that
offer.
to view a coupon
2 If available, select
code.
3 Write down this code and present it when
you arrive at the location.
Viewing an Offer List
Select Apps > Offers to view a list of the
offers you have received.
nüvi 2405/2505 Series Owner’s Manual
Disabling Traffic and Offers
To disable offers, you must disable traffic.
1 Select Settings > Traffic.
2 Select the Live Traffic check box.
Using the Language Guide
Use the Language Guide to look up and
translate words or phrases.
Select Apps > Language Guide.
Selecting Languages in a Language
Guide
You can select the languages you want to
translate when translating words and phrases.
1 Select Apps > Language Guide > Words
and Phrases.
2 Select > Language.
3 Select From, select the language to
translate from, and select Save.
45
4 Select To, select the language to translate
to, and select Save.
Traffic
Translating Words and Phrases
1 Select Apps > Language Guide > Words
NOTICE
Garmin is not responsible for the accuracy or
timeliness of the traffic information.
2 Select a category and subcategories.
3 If necessary, select , enter a keyword,
Traffic information may not be available in all
areas or countries.
A traffic receiver is included in some packages,
and is an optional accessory for all models. It is
built into the vehicle power cable. The powered
traffic receiver and the device must be in data
range of a station transmitting traffic data to
receive traffic information. You do not need to
activate the subscription included with your
traffic receiver.
For information about traffic receivers and
coverage areas, go to www.garmin.com/traffic.
and Phrases.
and select Done.
4 Select a word or a phrase.
to listen to the translation.
5 Select
Using the Bilingual Dictionary
1 Select Apps > Language Guide > Bilingual
46
Dictionaries.
Select a dictionary.
If necessary, select , enter a word, and
select Done.
Select a word.
Select
to listen to the translation.
nüvi 2405/2505 Series Owner’s Manual
Disabling Traffic
1 Select Settings.
2 Select the Live Traffic check box.
Traffic Receiver
➊
➋
The device no longer displays live traffic data,
but still avoids potentially congested areas using
trafficTrends (page 57).
Traffic Data
When the receiver is within a traffic coverage
area, your device will begin displaying traffic
information.
The traffic receiver and the device may need to
be in data range of an FM station transmitting
traffic information.
1 Connect the traffic receiver to an external
power source.
2 Connect the traffic receiver to the device.
NOTE: Heated (metallized) windshields could
degrade the performance of the traffic receiver.
nüvi 2405/2505 Series Owner’s Manual
➊
➋
➌
➍
➎
➌
➍
➎
Mini-USB connector
External antenna connector
Internal antenna
Power LED
Vehicle power adapter
47
About the Traffic Icon
When you are receiving traffic information, a
traffic icon appears on the map. The traffic icon
changes color to indicate the severity of traffic
conditions.
Color
Green
Yellow
Severity
Low
Medium
Red
High
48
Meaning
Traffic is flowing freely.
Traffic is moving but there is
a delay. There is moderate
traffic congestion.
Traffic is not moving or
moving slowly. There is a
severe delay.
Traffic on Your Route
When calculating your route, the device
examines the current traffic and automatically
optimizes the route for the shortest time. If a
severe traffic delay occurs on your route while
you are navigating, your device automatically
recalculates the route.
The traffic icon
changes color to indicate the
severity of traffic conditions on your route or on
the road you are currently traveling.
Your device may route you through a traffic
delay if a better alternative route does not exist.
The delay time is added into your estimated time
of arrival automatically.
nüvi 2405/2505 Series Owner’s Manual
Viewing Traffic on Your Route
1 While navigating a route, select
2 Select Traffic on Route.
A list of traffic events appears, organized by
their location on the route.
3 Select an event.
Manually Avoiding Traffic on Your Route
1 From the map, select .
2 Touch Traffic On Route.
3 If necessary, use the arrows to view other
traffic delays on your route.
4 Touch > Avoid.
Taking an Alternate Route
1 While navigating an automobile route, select
2 Select Alternate Route.
3 Select a route.
nüvi 2405/2505 Series Owner’s Manual
Viewing Traffic on the Map
The traffic map shows color-coded traffic flow
and delays on nearby roads.
1 From the map, select .
2 Select Traffic Conditions.
Traffic in Your Area
Searching for Traffic Delays
1 From the map page, select .
2 Select Traffic Conditions > .
3 Select an item in the list.
4 If there is more than one delay, use the
arrows to view additional delays.
Viewing a Traffic Incident on the Map
1 From the map, select .
2 Select Traffic Conditions.
3 Select a traffic icon.
49
Understanding Traffic Data
The traffic legend explains the icons and colors
used on the traffic map.
1 From the map, select .
2 Select Traffic Legend.
Traffic Subscriptions
Subscription Activation
You do not need to activate the subscription
included with your FM traffic receiver. The
subscription activates automatically after your
device acquires satellite signals while receiving
traffic signals from the pay service provider.
Lifetime Subscriptions
Some models include subscriptions to lifetime
features.
• LT—This model includes a lifetime traffic
subscription and a traffic receiver.
50
•
LMT—This model includes a nüMaps
Lifetime™ subscription, lifetime traffic
subscription (page 62), and a traffic receiver.
Adding a Subscription
You can purchase traffic subscriptions for other
regions or countries.
1 From the main menu, select Settings >
Traffic.
2 Select an option:
• For non-North American units, select
Subscriptions > .
• For North American units, select .
3 Write down the FM traffic receiver unit ID.
4 Go to www.garmin.com/fmtraffic to purchase
a subscription and get a 25-character code.
The traffic subscription code cannot be
reused. You must obtain a new code each
time you renew your service. If you own
nüvi 2405/2505 Series Owner’s Manual
multiple FM traffic receivers, you must obtain
a new code for each receiver.
5 Select Next on the device.
6 Enter the code.
7 Select Done.
Data Management
You can store files, such as JPEG image files,
on your device. The device has a memory card
slot for additional data storage.
NOTE: The device is not compatible with
Windows® 95, 98, Me, Windows NT®, and Mac®
OS 10.3 and earlier.
File Types
The device supports the following file types:
• JPEG and JPG image files (page 42)
nüvi 2405/2505 Series Owner’s Manual
•
•
Maps and GPX waypoint files from
MapSource® (page 63)
GPI custom POI files from Garmin POI
Loader (page 63)
About Memory Cards
You can purchase memory cards from an
electronics supplier, or purchase pre-loaded
Garmin mapping software. In addition to map
and data storage, the memory card can be used
to store files such as maps, images, geocaches,
routes, waypoints, and custom POIs.
Installing a Memory Card
The device supports microSD™ and microSDHC
memory or data cards.
1 Insert a memory card into the slot on the
device.
2 Press it in until it clicks.
51
Transferring Files from Your
Computer
1 Connect the device to your computer
52
(page 2).
Your device and memory card appear
as removable drives in My Computer in
Windows and as mounted volumes on Mac
computers.
NOTE: Some computers with multiple
network drives cannot display nüvi drives.
See your operating system help file to learn
how to map the drives.
On your computer, open the file browser.
Select the file.
Select Edit > Copy.
Open the Garmin or memory card drive or
volume.
Select Edit > Paste.
The file appears in the list of files in the
device memory or on the memory card.
Disconnecting the USB Cable
1.	 Complete an action:
•
For Windows computers, double-click the
eject icon
in your system tray.
• For Mac computers, drag the volume
icon to the Trash
2 Disconnect the cable from your computer.
Deleting Files
NOTICE
If you do not know the purpose of a file, do not
delete it. Your device memory contains important
system files that should not be deleted.
1 Open the Garmin drive or volume.
2 If necessary, open a folder or volume.
3 Select a file.
nüvi 2405/2505 Series Owner’s Manual
4 Press the Delete key on your keyboard.
•
Customizing the Device
•
1 Select Settings.
2 Select a setting category.
3 Select the setting to change it.
•
Map and Vehicle Settings
•
Select Settings > Map and Vehicle.
• Vehicle—changes the icon to represent your
position on the map. Go to www
.garmingarage.com for more icons.
• Driving Map View—sets the perspective on
the map.
• Pedestrian Map View—sets the perspective
on the map.
nüvi 2405/2505 Series Owner’s Manual
•
•
Map Detail—sets the level of detail on the
map. More detail may cause the map to
draw slower.
Map Theme—changes the color of the map
data.
Map Buttons—sets which buttons are
included on the map. You can include up to
three buttons on the map.
Map Layers—sets the data that appears on
the map (page 25).
Dashboards—sets the map dashboard
layout.
myMaps
Enabling Maps
TIP: To purchase additional map products, go to
www.garmin.com/maps.
1.	 Select Settings > Map and Vehicle >
myMaps.
2.	 Select a map.
53
Navigation Settings
Select Settings > Navigation.
• Calculation Mode—sets route preference.
• Avoidances—sets road features to avoid on
a route.
• Custom Avoidances—allows you to avoid
specific roads or areas.
• Advanced Detours—sets the length of a
detour.
• Limit Walking—controls the maximum
walking distance included in a pedestrian
route.
• Public Transit—enables or disables transit
types.
• Safe Mode—disables all functions that
require significant operator attention could
become a distraction while driving.
54
•
GPS Simulator—stops the device from
receiving a GPS signal, and saves battery
power.
Route Preferences
Select Settings > Navigation > Calculation
Mode.
The route calculation is based on road speeds
and vehicle acceleration data for a given route.
• Faster Time—calculates routes that are
faster to drive but can be longer in distance.
• Shorter Distance—calculates routes that
are shorter in distance but can take more
time to drive.
• Less Fuel—calculates routes that could use
less fuel than other routes.
• Off Road—calculates a direct line from your
location to your destination.
nüvi 2405/2505 Series Owner’s Manual
Display Settings
Select Settings > Display.
• Orientation—changes to landscape or
portrait mode.
• Color Mode—sets a light background (Day),
a dark background (Night), or automatically
switches between the two based on the
sunrise time and the sunset time for your
current location (Auto).
• Brightness—changes the brightness of the
screen. Decreasing the brightness can save
battery power.
• Display Timeout—sets the amount of idle
time before your device enters sleep mode.
• Screenshot—allows you to take a picture of
the device screen. Screenshots are saved in
the screenshot folder of the device storage.
nüvi 2405/2505 Series Owner’s Manual
Capturing Screenshots
1 Select Settings > Display > Screenshot >
Enabled.
2 Select to take a screenshot.
The picture bitmap file is saved in the
screenshots folder on the device drive (page
52).
Bluetooth Settings
Select Settings > Bluetooth.
• Bluetooth—enables the Bluetooth
component.
• Add Phone or Phone—manages
connections between your device and mobile
phones with Bluetooth wireless technology.
• Friendly Name—allows you to enter a
friendly name that identifies your nüvi on
devices with Bluetooth technology.
55
Managing the Bluetooth Device List
You can add, disconnect, or delete phones that
your device detects while Bluetooth is enabled.
1 Select Settings > Bluetooth > Phone.
2 Select an option:
• Select a phone for your device to
connect with.
• Select to add a phone to the menu.
• Select
to delete a phone from the
device memory.
• Select None to drop your current
connection.
Disabling Bluetooth
1 Select Settings > Bluetooth.
2 Select Bluetooth.
56
Traffic Settings
Select Settings > Traffic.
• Traffic—enables traffic and offers.
• Subscriptions—lists current traffic
subscriptions.
• trafficTrends™
Purchasing Traffic Subscriptions
You can purchase additional subscriptions or a
renewal if your subscription expires. Go to
www.garmin.com/fmtraffic.
Viewing Traffic Subscriptions
Select Settings > Traffic > Subscriptions.
nüvi 2405/2505 Series Owner’s Manual
trafficTrends
When the trafficTrends feature is enabled, your
device records historic traffic data and uses
that data to calculate more-efficient routes. This
information is sent to Garmin when your device
when you connect your device to myGarmin™
using your computer.
NOTE: Different routes may be calculated based
on traffic trends for the day of the week or the
time of day.
Disabling trafficTrends
To prevent your device from recording or sharing
traffic data, you must disable trafficTrends.
Select Settings > Traffic > trafficTrends.
Units and Time Settings
Select Settings > Units and Time.
• Current Time—sets the device time.
nüvi 2405/2505 Series Owner’s Manual
•
•
Units—sets the unit of measure used for
distances.
Time Format—allows you to select a
12-hour, 24-hour, or UTC display time.
Language and Keyboard Settings
Select Settings > Language.
• Voice Language—sets the language for
voice prompts.
• Text Language—sets all on-screen text to
the selected language.
NOTE: Changing the text language does not
change the language of user-entered data or
map data, such as street names.
• Keyboard Language—sets the language for
your keyboard.
• Keyboard Layout—sets the keyboard
layout.
57
Proximity Alerts Settings
Select Settings > Proximity Alerts.
• Audio—sets the tone of an alert.
• Alerts—alerts you when you approach
custom safety cameras.
About Device and Privacy
Select Settings > About Device and Privacy.
• About—displays the software version
number, the unit ID number, and information
about other software features.
• EULAs—displays the end-user license
agreements that apply to your choice.
NOTE: You need this information when you
update the system software or purchase
additional map data (page 63).
• Position Reporting—allows Garmin to
share your speed, direction, and location
58
•
•
with other service providers anonymously
with your consent.
Keep Travel History—allows the device to
record information for the, Where I’ve Been
(page 43), and Trip Log (page 25) features.
Clear Travel History
Restoring Settings
You can restore a category of settings or all
settings to the factory defaults.
1 Select Settings.
2 If necessary, select a settings category.
3 Select > Restore.
nüvi 2405/2505 Series Owner’s Manual
Appendix
Power Cables
Your device can be powered three ways.
• Vehicle power cable
• USB cable
• AC adapter (optional accessory)
Caring for Your Device
notice
Avoid dropping your device and operating it in
high-shock and high-vibration environments.
Do not expose the device to water.
Contact with water can cause this device to
malfunction.
Do not store the device where prolonged
exposure to extreme temperatures can occur,
because it can cause permanent damage.
nüvi 2405/2505 Series Owner’s Manual
Never use a hard or sharp object to operate the
touchscreen, or damage may result.
Cleaning the Outer Casing
notice
Avoid chemical cleaners and solvents that can
damage plastic components.
1 Clean the outer casing of the device (not the
touchscreen) using a cloth dampened with a
mild detergent solution.
2 Wipe the device dry.
Cleaning the Touchscreen
1 Use a soft, clean, lint-free cloth.
2 If necessary, use water, isopropyl alcohol, or
eyeglass lens cleaner.
3 Apply the liquid to the cloth.
4 Gently wipe the screen with the cloth.
59
Avoiding Theft
•
•
•
•
Remove the device and mount from sight
when not in use.
Remove the residue left on the windshield by
the suction cup.
Do not keep your unit in the glove
compartment.
Register your device at http://my.garmin
.com.
Erasing User Data
NOTE: Any items that you have saved are
erased.
1 Turn the device on.
2 Hold your finger on the lower-right corner of
the device screen.
3 Keep your finger pressed until the
pop-up window appears.
4 Select Yes to clear all user data.
60
All original settings are restored.
Extending the Battery Life
•
•
•
•
•
•
•
•
Keep your device away from extreme
temperatures.
Put the device in sleep mode (page 4).
Decrease the screen brightness (page 5).
Do not leave your device in direct sunlight.
Decrease the volume (page 5).
Disable offers and traffic (page 45).
Disable Bluetooth (page 56).
Shorten the display timeout time (page 55).
nüvi 2405/2505 Series Owner’s Manual
Changing the Fuse in the Vehicle
Power Cable
notice
When replacing the fuse, do not lose any of the
small pieces and make sure they are put back in
the proper position. The vehicle power cable
does not work unless it is assembled correctly.
If your device does not charge in your vehicle,
you may need to replace the fuse located at the
tip of the vehicle adapter.
1 Unscrew the end piece.
TIP: You may need to use a coin to remove
the end piece.
End
2 Remove the end piece,
piece
the silver tip, and the fuse
(glass and silver cylinder).
Silver tip
3 Install an 1 A fast-blow
fuse.
Fuse
nüvi 2405/2505 Series Owner’s Manual
4 Place the silver tip in the end piece.
5 Screw the end piece back into the vehicle
power cable.
Mounting on Your Dashboard
Notice
The permanent mounting adhesive is extremely
difficult to remove after it is installed.
Use the enclosed mounting disk to mount your
device to the dashboard and comply with certain
state regulations.
1.	 Clean and dry the dashboard where you are
placing the disk.
2 Remove the backing from the adhesive on
the bottom of the disk.
3 Place the disk on the dashboard.
4 Remove the clear plastic cover from the top
of the disk.
61
5 Place the suction cup mount on top of the
disk.
6 Flip the lever down (toward the disk).
Removing the Device, Cradle, and
Mount
Removing the Device from the Cradle
1 Press up on the tab on the top of the cradle.
2 Tilt the device forward.
Removing the Cradle from the Mount
1 Turn the cradle to the right or left.
2 Apply pressure until the socket on the cradle
releases the ball on the mount.
Removing the Suction Cup Mount from
the Windshield
1 Flip the lever on the suction cup mount
Updating Maps
You can update the maps on your device. For
more information, go to www.garmin.com/
mapupdates, and select Map Update User
Guide.
About nüMaps Lifetime
Some models include subscriptions to nüMaps
Lifetime, which provides quarterly map updates
for the life of your device.
Go to www.garmin.com/us/maps/numaps_
lifetime for terms and conditions.
LM
This model includes a nüMaps
Lifetime subscription.
LMT
This model includes a lifetime traffic
subscription, nüMaps Lifetime
subscription, and a traffic receiver.
toward you.
2 Pull the tab on the suction cup toward you.
62
nüvi 2405/2505 Series Owner’s Manual
Purchasing Additional Maps
1 Go to your device product page on the Garmin Web site (www.garmin.com).
2 Click the Maps tab.
3 Follow the on-screen instructions.
Custom Points of Interest
Custom POIs are customized points on the map. They can contain alerts that let you know if you are
near a designated point or if you are traveling faster than a specified speed.
Installing a POI Loader
You can create or download custom POI lists and install them on your device using POI Loader
software.
1 Go to www.garmin.com/extras.
2 Click Services > POI Loader.
3 Install the POI Loader onto your computer.
Using the POI Loader Help Files
For more information on the POI Loader, refer to the help file.
With the POI Loader open, click Help.
nüvi 2405/2505 Series Owner’s Manual
63
Finding Extras
1 Select Where To? > Extras.
2 Select a category.
Purchasing Accessories
Go to http://buy.garmin.com.
64
Troubleshooting
Problem
Solution
My device is not acquiring • Verify the GPS simulator is turned
satellite signals
• From the main menu, select Settin
• Take your device out of parking ga
• Remain stationary for several minu
The suction cup will not
• Clean the suction cup and windshie
stay on my windshield.
• Dry with a clean, dry cloth.
• Mount the suction cup (page 1).
The device does not
• Check the fuse in the vehicle powe
charge in my vehicle.
• Verify the vehicle is turned on and
• Your device can only charge betwe
If the device is placed in direct sun
My battery does not stay To maximize the time between change
charged for very long.
My battery gauge does not Allow the unit to fully discharge, and fu
seem accurate.
cycle).
How do I know my device When your device is in USB mass sto
is in USB mass storage
to a computer is shown on the device
mode?
removable disk drives listed in My Co
nüvi 2405/2505 Series Owner’s Manual
The device is connected 1.	Disconnect the USB cable from your computer.
to the computer, but it will 2.	Turn off the device.
not go into mass storage 3.	Plug the USB cable into a USB port on your computer and into your device.
mode.
The device automatically turns on and goes into USB mass storage mode.
off (page 54).
ngs > System > GPS Simulator > Off. 4.	Verify your device is connected to a USB port and not a USB hub.
arages and away
fromsee
tall buildings
I cannot
any new and trees.
If you have several network drives mapped on your computer, Windows can have
removable drives in my list trouble assigning drive letters to your device drives. Refer to your operating system
utes.
of drives.
Help file to learn how to map or assign drive letters.
eld with rubbing
alcohol.
My phone will not connect • From the main menu, select Tools > Settings > Bluetooth. The Bluetooth field
to the device.
must be set to Enabled.
• Turn on your phone and bring it within 33 feet of the device.
er cable (page 61).
• Go to www.garmin.com/bluetooth for more help.
is supplying power to the power outlet.
een 32°F and 113°F (between 0°C and 45°C).
nlight or in a hot environment, it cannot charge.
es, turn down the backlight (page 55).
ully charge it (without interrupting the charge
orage mode, a picture of a device connected
screen. Also, you should see two new
omputer.
nüvi 2405/2505 Series Owner’s Manual
65
Index
Symbols
2-D, 3-D map view 25
accessories 62
adding a stop 22
addresses 11
audiobook 38
bookmark 39
loading 38
playing 38
automatic volume 5
enabling 5
avoiding
public transit types 23, 29
theft 59
traffic 48
66
battery 63
Bluetooth technology 30–73
friendly name 54
pairing with phone 30
settings 54
brightness 54
calculator 43
calls
answering 31
hanging up 33
home 33
muting 33
caring for your device 58
category
searching within 9
charging your device 1, 63
cityXplorer maps 20, 29
cleaning your device 58
computer, connecting 2
converting
currency 43
units 43
coordinates 12
current location, saving 15
customizing the device 52–59
custom POIs 62
dashboard disk 60
deleting
all user data 59
character 7
files 51
pictures 42
recent finds list 14
saved locations 17
trips 41
detailed maps 50, 52
detours 22
display settings 23, 29
display timeout 54
driving directions 26
nüvi 2405/2505 Series Owner’s Manual
E
ecoRoute 34–37
calibrate fuel economy 35
ecoChallenge score 36
fuel economy information 37
mileage report 37
vehicle profile 34
editing
change categories 16
change map symbol 16
destinations 41
home location 14
saved locations 16
saved trip 41
extras 62
feedback on POI's 10
files
deleting 51
supported types 50
finding locations
by address 11
by coordinates 12
recent selections 14
saved locations 16
using photos 14
using search bar 9
fuse, changing 60
keyboard 7
language mode 7, 56
geocaching 12
go home 13
GPS
settings 53
simulator 15
help 34
historical traffic 55
home
phone number 33
setting a location 13
nüvi 2405/2505 Series Owner’s Manual
JPEG image files 50
junction view 27
latitude and longitude 12
locations 9
maps
adding 62
detail level 52
errors 10
purchasing 62
theme 52
view 25
MapSource 50, 62
mass storage mode 50
measurements, converting 43
memory card 50
67
mileage report 37
mounting the device
on dashboard 60
on windshield 63
removing from mount 61
mute
phone call 33
myDashboard 2
myTrends
enabling 57
navigation 21
off road 24
pedestrian 28
photo 14
nearby services 34
next turn 27
nüMaps Lifetime 61
68
offers 43
disabling 44
viewing 44
off-road navigation 24, 53
on-screen buttons 7
pairing a mobile phone 30
parking 14
last spot 42
saving 43
pedestrian mode
settings 23, 29
photo navigation
loading pictures 14
picture viewer 41
PIN
Bluetooth 31
points of interest
finding 9
POI loader 50
protecting your device
58
public transit
avoidances 23, 29
city maps 29
recalculating routes 22
recently found locations 14
registering the device 3
removing the mount 61
renaming trips 41
resetting
home location 14
the max speed 26
trip data 26
routes
off road 24, 53
stopping 23
safe mode 53
satellite signals 6
Saved Locations 15–16
saving
your current location 15
nüvi 2405/2505 Series Owner’s Manual
school zone database 62
screen
brightness 54
screenshots 54
settings 52–73
software
version 57
speech recognition 17
storing the device 58
system settings 53
text language 56
time settings 56
tools 34–39
Track Up 25
traffic 45–73
activating a subscription 49
adding traffic subscriptions 55
icons 46
incidents 47
receiver 46
trafficTrends 55
traffic alerts 27
transportation mode 6
trip computer 28
trip log 24
enabling 57
trip planner 40
troubleshooting 63
turn-by-turn directions 26
turn list 26
unit converter 43
unit ID 57
updating
maps 3
software 3
USB 63
user data, deleting 59
voice language 56
voice mail 33
volume
adjusting 4
audio mixer 4
automatic 5
Where Am I? 34
Where I've Been
enabling 57
Where To? menu 8
customization
shortcut icon, adding 8
shortcut icon, removing 8
world clock 42
voice command
activating 18
navigating with 18
tips for using 18
wakeup phrase 18
nüvi 2405/2505 Series Owner’s Manual
69
www.garmin.com/support
913-397-8200
1-800-800-1020
0808 2380000
+44 (0) 870.8501241
1-866-429-9296
43 (0) 3133 3181 0
00 32 2672 5254
00 45 4810 5050
00 358 19 311 001
00 33 1 5517 81 89
00 39 02 3669 9699
0800-0233937
815 69 555
00 35 1214 447 460
00 902 00 70 97
00 46 7744 52020
0180 5 / 42 76 46 - 880
0180 5 / 42 76 46 - 550
00800 4412 454
+44 2380 662 915
Garmin International, Inc.
1200 East 151st Street,
Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park
Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Zhangshu 2nd Road, Xizhi Dist.
New Taipei City, 221, Taiwan (R.O.C.)
Garmin®, the Garmin logo, MapSource®, and nüvi® are trademarks of Garmin
Ltd. or its subsidiaries, registered in the USA and other countries. cityXplorer™,
ecoRoute™, myGarmin™, nüMaps Guarantee™, nüMaps Lifetime™, nüviand
trafficTrends™ are trademarks of Garmin Ltd. or its subsidiaries. These
trademarks may not be used without the express permission of Garmin.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG,
Inc., and any use of such name by Garmin is under license. Windows® is
a registered trademarks of Microsoft Corporation in the United States and/
or other countries. Mac® is a registered trademark of Apple Computer, Inc.
microSD™ is a trademark of SD-3C, LLC. Audible.com® and AudibleReady® are
registered trademarks of Audible, Inc. © 1997–2005 Audible.
© 2011 Garmin Ltd. or its subsidiaries
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18
Create Date                     : 2011:08:04 10:31:18-05:00
Metadata Date                   : 2011:08:04 10:31:28-05:00
Modify Date                     : 2011:08:04 10:31:28-05:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 9548 bytes, use -b option to extract)
Instance ID                     : uuid:d83c0a85-8466-4c80-882b-698e12e3fc78
Document ID                     : xmp.did:16FAD80A19BDE011A12AD42D67814ADD
Original Document ID            : xmp.did:F2A9F7ACE327E011B3BBF9500EEE4292
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F2A9F7ACE327E011B3BBF9500EEE4292, xmp.iid:F3A9F7ACE327E011B3BBF9500EEE4292, xmp.iid:F4A9F7ACE327E011B3BBF9500EEE4292, xmp.iid:47A4E3062F2AE011AE7BCAF99093292E, xmp.iid:48A4E3062F2AE011AE7BCAF99093292E, xmp.iid:49A4E3062F2AE011AE7BCAF99093292E, xmp.iid:4AA4E3062F2AE011AE7BCAF99093292E, xmp.iid:4BA4E3062F2AE011AE7BCAF99093292E, xmp.iid:4CA4E3062F2AE011AE7BCAF99093292E, xmp.iid:4DA4E3062F2AE011AE7BCAF99093292E, xmp.iid:8672117BFB7BE011B531967D0D5599FD, xmp.iid:8772117BFB7BE011B531967D0D5599FD, xmp.iid:8872117BFB7BE011B531967D0D5599FD, xmp.iid:8972117BFB7BE011B531967D0D5599FD, xmp.iid:8A72117BFB7BE011B531967D0D5599FD, xmp.iid:8B72117BFB7BE011B531967D0D5599FD, xmp.iid:8F0DF9B3007CE011B531967D0D5599FD, xmp.iid:900DF9B3007CE011B531967D0D5599FD, xmp.iid:910DF9B3007CE011B531967D0D5599FD, xmp.iid:920DF9B3007CE011B531967D0D5599FD, xmp.iid:930DF9B3007CE011B531967D0D5599FD, xmp.iid:1E298E22B97CE01189CCE7E84E585E20, xmp.iid:1F298E22B97CE01189CCE7E84E585E20, xmp.iid:20298E22B97CE01189CCE7E84E585E20, xmp.iid:21298E22B97CE01189CCE7E84E585E20, xmp.iid:22298E22B97CE01189CCE7E84E585E20, xmp.iid:23298E22B97CE01189CCE7E84E585E20, xmp.iid:24298E22B97CE01189CCE7E84E585E20, xmp.iid:25298E22B97CE01189CCE7E84E585E20, xmp.iid:26298E22B97CE01189CCE7E84E585E20, xmp.iid:DAC40377BA7CE01189CCE7E84E585E20, xmp.iid:DBC40377BA7CE01189CCE7E84E585E20, xmp.iid:25A66B4EBF7CE01189CCE7E84E585E20, xmp.iid:8F8DB1892A83E0118F55F25912D42C94, xmp.iid:908DB1892A83E0118F55F25912D42C94, xmp.iid:918DB1892A83E0118F55F25912D42C94, xmp.iid:A3261F672B83E011B893C5D3B1DF8ECA, xmp.iid:A4261F672B83E011B893C5D3B1DF8ECA, xmp.iid:9C0DE64E4585E01192129559C4C0A461, xmp.iid:9D0DE64E4585E01192129559C4C0A461, xmp.iid:9E0DE64E4585E01192129559C4C0A461, xmp.iid:9F0DE64E4585E01192129559C4C0A461, xmp.iid:A00DE64E4585E01192129559C4C0A461, xmp.iid:ED64E5E0D687E0119743B97D5C66F24F, xmp.iid:4AE2F9211291E01188EA84198B790754, xmp.iid:6A5F8B76CD95E0119156B24BA242579D, xmp.iid:6B5F8B76CD95E0119156B24BA242579D, xmp.iid:6C5F8B76CD95E0119156B24BA242579D, xmp.iid:6D5F8B76CD95E0119156B24BA242579D, xmp.iid:6E5F8B76CD95E0119156B24BA242579D, xmp.iid:6F5F8B76CD95E0119156B24BA242579D, xmp.iid:705F8B76CD95E0119156B24BA242579D, xmp.iid:715F8B76CD95E0119156B24BA242579D, xmp.iid:725F8B76CD95E0119156B24BA242579D, xmp.iid:735F8B76CD95E0119156B24BA242579D, xmp.iid:B1CA4301CF95E0119156B24BA242579D, xmp.iid:B2CA4301CF95E0119156B24BA242579D, xmp.iid:F361D4ECD395E011B3EDBF5CC2BF8C1D, xmp.iid:F461D4ECD395E011B3EDBF5CC2BF8C1D, xmp.iid:F561D4ECD395E011B3EDBF5CC2BF8C1D, xmp.iid:F661D4ECD395E011B3EDBF5CC2BF8C1D, xmp.iid:7D2CD23BDBA0E011B5FED32B7994D132, xmp.iid:7E2CD23BDBA0E011B5FED32B7994D132, xmp.iid:B40453BFB6A1E011AE78F1C7B8987C90, xmp.iid:B50453BFB6A1E011AE78F1C7B8987C90, xmp.iid:0FED05FA71A2E011AF33DA81C21D0A12, xmp.iid:10ED05FA71A2E011AF33DA81C21D0A12, xmp.iid:13ED05FA71A2E011AF33DA81C21D0A12, xmp.iid:14ED05FA71A2E011AF33DA81C21D0A12, xmp.iid:15ED05FA71A2E011AF33DA81C21D0A12, xmp.iid:16ED05FA71A2E011AF33DA81C21D0A12, xmp.iid:DB42723588A2E011AF33DA81C21D0A12, xmp.iid:E142723588A2E011AF33DA81C21D0A12, xmp.iid:F5ED411825A3E011B384FEA2969EEFD1, xmp.iid:A29D9EDAFCA3E0118B41D82D7C1215F9, xmp.iid:72A71E9E94A8E011BBB79B516A573082, xmp.iid:73A71E9E94A8E011BBB79B516A573082, xmp.iid:5F838E20CFA8E011BBB79B516A573082, xmp.iid:95C4637697A9E011AFE0E95ACEFC3A09, xmp.iid:96C4637697A9E011AFE0E95ACEFC3A09, xmp.iid:70C36DA2FAABE011A176C3D9A23B8DCA, xmp.iid:ED1A5547A3ACE0119D81DBE7BC69EDF1, xmp.iid:F31A5547A3ACE0119D81DBE7BC69EDF1, xmp.iid:8783AD24CDACE01188B0A2A6BCC7A078, xmp.iid:8883AD24CDACE01188B0A2A6BCC7A078, xmp.iid:8983AD24CDACE01188B0A2A6BCC7A078, xmp.iid:8A83AD24CDACE01188B0A2A6BCC7A078, xmp.iid:E23C5F25CFACE011BECCB0FBA9043027, xmp.iid:E33C5F25CFACE011BECCB0FBA9043027, xmp.iid:2B76915BCDB2E011B6E2E6AA8BB95E4B, xmp.iid:67DA46FBA4B4E011B667AF6C055E5984, xmp.iid:AECAB310A0B7E011ADD4A29FB1DD3F39, xmp.iid:AFCAB310A0B7E011ADD4A29FB1DD3F39, xmp.iid:B0CAB310A0B7E011ADD4A29FB1DD3F39, xmp.iid:256214694BB9E011B552FB1F6F1C06F1, xmp.iid:1F9BC1311DBAE011BD92E1234EDDE026, xmp.iid:EAB1BD3E68BCE011B14BCA14D9628E2D, xmp.iid:15FAD80A19BDE011A12AD42D67814ADD, xmp.iid:16FAD80A19BDE011A12AD42D67814ADD, xmp.iid:18FAD80A19BDE011A12AD42D67814ADD, xmp.iid:D7248D99CFBDE011B06FFB866F2FF5E3, xmp.iid:D8248D99CFBDE011B06FFB866F2FF5E3, xmp.iid:A74F2D44EEBDE01188369E6C5C6CC302, xmp.iid:4FF23D86A1BEE011940C879E3797AB34, xmp.iid:50F23D86A1BEE011940C879E3797AB34, xmp.iid:51F23D86A1BEE011940C879E3797AB34
History When                    : 2011:01:24 11:59:23-06:00, 2011:01:24 12:05:26-06:00, 2011:01:24 12:05:26-06:00, 2011:01:27 10:03:48-06:00, 2011:01:27 10:03:48-06:00, 2011:01:27 10:04:07-06:00, 2011:01:27 10:04:07-06:00, 2011:01:27 10:04:43-06:00, 2011:01:27 10:04:43-06:00, 2011:01:27 10:05:06-06:00, 2011:05:11 13:54:40-05:00, 2011:05:11 13:54:40-05:00, 2011:05:11 13:57:58-05:00, 2011:05:11 13:57:58-05:00, 2011:05:11 13:58:41-05:00, 2011:05:11 13:58:41-05:00, 2011:05:11 13:58:48-05:00, 2011:05:11 13:58:48-05:00, 2011:05:11 13:59:35-05:00, 2011:05:11 13:59:35-05:00, 2011:05:11 14:00:06-05:00, 2011:05:12 11:59:01-05:00, 2011:05:12 11:59:01-05:00, 2011:05:12 12:00:05-05:00, 2011:05:12 12:05:31-05:00, 2011:05:12 12:05:31-05:00, 2011:05:12 12:05:50-05:00, 2011:05:12 12:05:50-05:00, 2011:05:12 12:08:25-05:00, 2011:05:12 12:08:25-05:00, 2011:05:12 12:36:01-05:00, 2011:05:12 12:40:44-05:00, 2011:05:12 12:44:11-05:00, 2011:05:20 16:45:54-05:00, 2011:05:20 16:47:21-05:00, 2011:05:20 16:51:27-05:00, 2011:05:20 16:52:05-05:00, 2011:05:20 16:52:05-05:00, 2011:05:23 09:02:34-05:00, 2011:05:23 09:03:58-05:00, 2011:05:23 09:03:58-05:00, 2011:05:23 09:18:56-05:00, 2011:05:23 09:20:11-05:00, 2011:05:26 15:29:38-05:00, 2011:06:07 09:26:28-05:00, 2011:06:13 10:02:03-05:00, 2011:06:13 10:02:03-05:00, 2011:06:13 10:04:25-05:00, 2011:06:13 10:06:24-05:00, 2011:06:13 10:06:54-05:00, 2011:06:13 10:06:54-05:00, 2011:06:13 10:08:11-05:00, 2011:06:13 10:08:25-05:00, 2011:06:13 10:08:25-05:00, 2011:06:13 10:08:33-05:00, 2011:06:13 10:08:33-05:00, 2011:06:13 10:13:13-05:00, 2011:06:13 10:50:14-05:00, 2011:06:13 10:50:14-05:00, 2011:06:13 10:53:23-05:00, 2011:06:13 10:53:23-05:00, 2011:06:27 11:33:48-05:00, 2011:06:27 11:33:48-05:00, 2011:06:28 13:45:08-05:00, 2011:06:28 13:45:08-05:00, 2011:06:29 12:21:13-05:00, 2011:06:29 12:21:13-05:00, 2011:06:29 12:21:36-05:00, 2011:06:29 12:21:36-05:00, 2011:06:29 13:16:56-05:00, 2011:06:29 14:24:25-05:00, 2011:06:29 15:56:15-05:00, 2011:06:29 17:36:46-05:00, 2011:06:30 11:33:17-05:00, 2011:07:01 11:12:08-05:00, 2011:07:07 11:13:59-05:00, 2011:07:07 13:52:39-05:00, 2011:07:07 15:23:30-05:00, 2011:07:08 14:21:21-05:00, 2011:07:08 15:55:55-05:00, 2011:07:11 15:52:03-05:00, 2011:07:12 11:23:29-05:00, 2011:07:12 14:04:19-05:00, 2011:07:12 16:23:10-05:00, 2011:07:12 16:26:36-05:00, 2011:07:12 16:27:40-05:00, 2011:07:12 16:28:11-05:00, 2011:07:12 16:37:30-05:00, 2011:07:12 16:38:13-05:00, 2011:07:20 08:09:57-05:00, 2011:07:22 15:55:50-05:00, 2011:07:26 10:58:12-05:00, 2011:07:26 11:00:21-05:00, 2011:07:26 11:00:21-05:00, 2011:07:28 16:00:23-05:00, 2011:07:29 14:58:57-05:00, 2011:08:01 16:01:50-05:00, 2011:08:02 10:06:47-05:00, 2011:08:02 10:06:47-05:00, 2011:08:02 16:00:51-05:00, 2011:08:03 07:53:35-05:00, 2011:08:03 09:12:48-05:00, 2011:08:03 15:53:35-05:00, 2011:08:04 08:56:17-05:00, 2011:08:04 08:57:14-05:00, 2011:08:04 10:25:52-05:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /metadata, /;/metadata, /metadata, /, /metadata, /, /, /, /metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /, /metadata, /, /, /, /metadata, /, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /, /, /metadata, /;/metadata, /, /, /metadata, /, /, /metadata, /, /metadata, /, /, /, /metadata, /metadata, /, /, /metadata, /, /metadata, /, /metadata, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /
Derived From Instance ID        : xmp.iid:15FAD80A19BDE011A12AD42D67814ADD
Derived From Document ID        : xmp.did:B0CAB310A0B7E011ADD4A29FB1DD3F39
Derived From Original Document ID: xmp.did:F2A9F7ACE327E011B3BBF9500EEE4292
Derived From Rendition Class    : default
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 186.11, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 96.00, 72.00, 186.11, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:34902F0DA39EE0119DB2FBE23F7F6A90, uuid:E2D274F06C55DD11B659DC6B3AA69CE3, xmp.iid:FD31507ADBA0E011BDF3FD60747F078D, xmp.iid:926A6B0ED5A8E0118C24B408C4A6E461, xmp.iid:DA9754C208BEE011B13CC7541C32C3A1, uuid:077EA8235200DF11B1839337DD5883B8, uuid:43BAC118000DDF11BDBF8CB3A3D6A7DE, uuid:7B7E7FBE3122DF11B222D2CFB65B61F8, uuid:9B962D7112CDDD119482EC99866B94C5, uuid:9B962D7112CDDD119482EC99866B94C5, uuid:9B962D7112CDDD119482EC99866B94C5, uuid:27A43B1C8FD6DC11A022D32D73CD1FB4, uuid:1335661D901FDE1190B7A7919AC6226A, uuid:1335661D901FDE1190B7A7919AC6226A, uuid:1335661D901FDE1190B7A7919AC6226A, uuid:1335661D901FDE1190B7A7919AC6226A, uuid:1335661D901FDE1190B7A7919AC6226A, uuid:1335661D901FDE1190B7A7919AC6226A, uuid:1335661D901FDE1190B7A7919AC6226A, uuid:1335661D901FDE1190B7A7919AC6226A, uuid:6b80fa02-1d7c-11db-9eae-8afb4438b7d1, uuid:5D69E5276581DB119F84D1641FE61733, uuid:0f1317a8-7222-49b4-9077-b56f7d7d97ee, uuid:227091f8-beeb-4add-bccb-07387e6f7668, uuid:35304a16-6d9c-4cee-8b49-92e7d038f785, uuid:24ec6b8d-556a-413d-b5b5-4a8545e82729, uuid:c8423bee-7ad1-4d24-99b0-b349ccdefae9, uuid:d0700515-4424-4296-8911-54bdbad9f1df, uuid:6d480f92-23f6-4164-bbe1-915ad89aa7a1, uuid:60221cb1-4935-4eff-a059-c3e47b039f47, uuid:e196f40d-a16d-4837-8410-f4f01199f2a3, uuid:8352e7af-c968-4b06-b26b-f427dcc64035, uuid:02fbe442-709f-464b-a1db-51df23f8d1c0, uuid:a5b22046-efb4-42d7-be16-ca2bbffb695d, uuid:4f1d57c4-5c0e-44a9-901c-abe84e3bf5af, uuid:1a32abed-bf15-4d5e-b8a9-0b8c591b0eae, uuid:242c6faa-47ca-4a34-8368-f7789a724a3c, uuid:36a894e4-5113-4295-a224-9ea4091d996b, uuid:a9749c1d-2212-4a1d-8e19-168fe422ce4b, uuid:59bcbaf3-f2a7-4298-861b-4e869a5cbb09
Manifest Reference Document ID  : xmp.did:33902F0DA39EE0119DB2FBE23F7F6A90, uuid:E1D274F06C55DD11B659DC6B3AA69CE3, xmp.did:FB31507ADBA0E011BDF3FD60747F078D, xmp.did:906A6B0ED5A8E0118C24B408C4A6E461, xmp.did:D89754C208BEE011B13CC7541C32C3A1, uuid:75C008F85100DF11B1839337DD5883B8, uuid:42BAC118000DDF11BDBF8CB3A3D6A7DE, uuid:7A7E7FBE3122DF11B222D2CFB65B61F8, uuid:9A962D7112CDDD119482EC99866B94C5, uuid:9A962D7112CDDD119482EC99866B94C5, uuid:9A962D7112CDDD119482EC99866B94C5, uuid:26A43B1C8FD6DC11A022D32D73CD1FB4, uuid:1235661D901FDE1190B7A7919AC6226A, uuid:1235661D901FDE1190B7A7919AC6226A, uuid:1235661D901FDE1190B7A7919AC6226A, uuid:1235661D901FDE1190B7A7919AC6226A, uuid:1235661D901FDE1190B7A7919AC6226A, uuid:1235661D901FDE1190B7A7919AC6226A, uuid:1235661D901FDE1190B7A7919AC6226A, uuid:1235661D901FDE1190B7A7919AC6226A, adobe:docid:photoshop:509926f4-1d7c-11db-9eae-8afb4438b7d1, uuid:5C69E5276581DB119F84D1641FE61733, xmp.did:421C3F70956AE01180B8A1C4DA33FD19, xmp.did:A33C8E5FA56AE01180B8A1C4DA33FD19, xmp.did:3E1C3F70956AE01180B8A1C4DA33FD19, xmp.did:391C3F70956AE01180B8A1C4DA33FD19, xmp.did:411C3F70956AE01180B8A1C4DA33FD19, xmp.did:A23C8E5FA56AE01180B8A1C4DA33FD19, xmp.did:3D1C3F70956AE01180B8A1C4DA33FD19, xmp.did:3B1C3F70956AE01180B8A1C4DA33FD19, xmp.did:CCA4416AB0A8E011A89AF6D2FA96ECD9, xmp.did:A03C8E5FA56AE01180B8A1C4DA33FD19, xmp.did:3A1C3F70956AE01180B8A1C4DA33FD19, xmp.did:A43C8E5FA56AE01180B8A1C4DA33FD19, xmp.did:BE16BE0409A8E0119B77912FF2C579AF, xmp.did:A13C8E5FA56AE01180B8A1C4DA33FD19, xmp.did:AF69BAE005A8E011B577C1CB29E7AD32, xmp.did:A53C8E5FA56AE01180B8A1C4DA33FD19, uuid:A7D6D30B435CDE11B0FBA87E98C8B9AF, xmp.did:DD341BA5F8ABE011B33E90DACB1DEB79
Doc Change Count                : 21445
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 77
Creator                         : Adobe InDesign CS4 (6.0.6)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IPH-01926

Navigation menu