Garmin 01997 NON BROADCAST MURS TRANSMITTER User Manual

Garmin International Inc NON BROADCAST MURS TRANSMITTER

Contents

User Manual 2

Download: Garmin 01997 NON BROADCAST MURS TRANSMITTER User Manual
Mirror Download [FCC.gov]Garmin 01997 NON BROADCAST MURS TRANSMITTER User Manual
Document ID1746369
Application ID1HeNlLcNtnm2zgMBmf9jhQ==
Document DescriptionUser Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize154.98kB (1937214 bits)
Date Submitted2012-07-18 00:00:00
Date Available2012-09-01 00:00:00
Creation Date2012-07-06 16:42:35
Producing SoftwareAntenna House PDF Output Library 2.6.0 (Windows (x64))
Document Lastmod2012-07-16 08:16:02
Document TitleUntitled
Document CreatorAH Formatter V5.3 MR3 (5,3,2011,1116) for Windows (x64)

SPECIFICATION
CONTROL
DRAWING
Revisions
Rev.
Date
Description
Production Release
7/13/12
ECO No.
––––
Dimensions and drawings for reference only. Drawings are not to scale.
Trimmed dimensions
Trimmed and bound dimensions
4.75"
9.5"
Cover
Cover
4.75"
Spread layout
Files
AF
Product documentation, Alpha TT Owner's Mnual (EN)
Trimmed: Width = 9.5" Height = 4.75". Finished, Folded: Width = 4.75", Height = 4.75".
±0.0787" (±2 mm)
70 pages
Cover: 200-lb coated ivory board. Text: 100-lb matte-finish offset. Approved Equivalents Allowed
Cover: High gloss. Text: Matte. Approved Equivalents Allowed.
Cover: 4-color process.  Text: Black and white
Saddle-stitched (72 pages maximum), Perfect-bound. Approved Equivalents Allowed.
N/A
Shall conform to Garmin Archive 190-01500-00_0A.zip
1. Description
2. Size
3. Tolerance
4. Pagination
5. Material
6. Finish
7. Color
8. Bindery
9. Folds
10. Electronic Artwork
11. Languages
12. Notes
Cover
Binding
This part shall comply with Garmin Banned & Restricted Substances (GPN 001-00211-00).
Specifications
4.75"
The following files have been archived under the above ARCHIVE FILENAME.
File Name
190-01500-00_0A.indd
190-01500-00_0A_Spec.indd
190-01500-00_0A.pdf
Links
Fonts
Alpha-TT_OM_EN.pdf
File Contents
InDesign CS4 for PC, Formatted manual
InDesign CS4 for PC, Document specification sheet
Portable Document Format, Manual and specification sheet for printing
Graphic files (eps, bmp, etc.)
Font files
Portable Document Format, for online
Garmin Ltd. or its subsidiaries
C/O Garmin International, Inc.
1200 E. 151st Street
Olathe, Kansas 66062 U.S.A.
CONFIDENTIAL
This drawing and the specifications contained herein are the property of Garmin Ltd. or
its subsidiaries and may not be reproduced or used in whole or in part as the basis for
manufacture or sale of products without written permission.
Initials
Drawn By:
Checked By:
KEG
Date
7/13/12
TITLE
SIZE
Project Manager:
SCALE
Approved By:
N/A
Alpha TT Owner's Manual (EN)
PART NO:
190-01500-00
REV:
Sheet
Of
72
™
™
Alpha 100 and TT 10
AF
Owner’s Manual
July 2012
190-01500-00_01
Printed in Taiwan
D
AF
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without
the written consent of Garmin. Garmin reserves the right to change or improve its products and to make
changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to www.garmin.com for current updates and supplemental information
concerning the use of this product.
Garmin®, the Garmin logo, BlueChart®, and City Navigator® are trademarks of Garmin Ltd. or its
subsidiaries, registered in the USA and other countries. Alpha™, ANT+™, BaseCamp™, and TT™ are
trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express
permission of Garmin.
microSD™ is a trademark of SD-3C, LLC. Windows® and Windows NT® are registered trademarks of
Microsoft Corporation in the United States and other countries. Mac® is a trademark of Apple Computer,
Inc., registered in the U.S. and other countries.
Getting Started............................... 1
AF
Setting Up the Alpha System .................. 1
Device Overviews ................................... 1
Alpha 100 Handheld Device ............. 1
TT 10 Dog Collar Device ................... 2
Getting More Information ........................ 2
Registering Your Device ......................... 2
Installing the Battery in the Handheld
Device ..................................................... 2
Charging the Handheld Device ............... 3
Charging the Dog Collar Device ............. 4
Turning On the Devices .......................... 4
Turning Off the Devices .................... 4
Acquiring Satellite Signals ...................... 5
Using the Touchscreen ........................... 5
Locking the Touchscreen ........................ 5
Unlocking the Touchscreen ............. 5
Profiles .................................................... 5
Changing Profiles .............................. 5
Creating a Custom Profile ................. 6
Editing a Profile Name ...................... 6
Adding a Dog Over MURS/VHF ........ 7
Adding a Dog Using the Track and
Train Codes ...................................... 7
Finding the Dog ID and Track and
Train Codes ................................. 8
Sharing a Dog Wirelessly Over ANT+ 8
Editing Dog Information ......................... 9
Resetting a Dog's Statistics and
Track ................................................. 9
Changing the Length of the Dog's
Track ................................................. 9
Changing the Dog Name .................. 9
Changing the Color of the Dog's
Track ................................................. 9
Changing the Dog Type .................... 9
Changing the Dog ID ....................... 9
Setting Dog Alerts ........................... 10
Removing a Dog ............................. 10
Attaching the Collar on Your Dog ......... 10
Communication with the Collar ............. 11
Table of Contents
Dog Collar Device Setup............... 6
Methods to Add a Dog to a Handheld
Device ..................................................... 6
Table of Contents
Dog Tracking................................ 12
Tracking Your Dog on the Map ............. 13
Dog Status Icons ................................... 13
Dog Tracking Compass ........................ 14
Navigating to Your Dog ......................... 14
Dog Training................................. 16
Hunting with the Alpha System.. 26
Marking Your Truck Location ................ 26
Marking a Covey ................................... 26
Turning On the Collar Beacon .............. 26
Turning On Rescue Mode ..................... 27
AF
Selecting and Installing the Contact
Points .................................................... 17
Removing the Contact Points ......... 17
Setting the Training Keys for One Dog . 17
Setting the Training Keys for Training
More Than One Dog ............................. 18
Basic Training Commands .................... 18
Training to Heel ............................... 19
Training to Sit and Stay ................... 19
Training to Come Here .................... 19
Collar Training ................................. 20
Training Intensities and Types .. 21
Teaching the Dog to Heel and Sit
with the Collar ........................... 22
Training the Dog to Come Here
with the Collar ........................... 23
Adding a Contact Over MURS/VHF ...... 23
Adding a Contact Using the ID .............. 24
Sending a Message to Your Contacts .. 24
Tracking a Contact ................................ 25
Finding Your Contact ID ........................ 25
Changing Your Contact ID .................... 25
Updating a Contact's ID ........................ 25
Tracking with BaseCamp™
BaseStation .......................................... 14
Pausing Dog Tracking ........................... 15
Pausing All Dog Tracking ...................... 15
Location Alerts ...................................... 15
Setting a Geofence Alert ................. 15
Setting a Radius Alert ..................... 16
Editing Location Alerts .................... 16
Contact Tracking.......................... 23
ii
Waypoints, Routes, and Tracks . 27
Waypoints ............................................. 27
Marking Your Current Location ....... 27
Marking a Waypoint Using the
Map ................................................. 27
Editing a Waypoint .......................... 27
Repositioning a Waypoint to Your
Current Location ............................. 27
Moving a Waypoint on the Map ...... 28
Increasing the Accuracy of a Waypoint
Location .......................................... 28
Projecting a Waypoint ..................... 28
Deleting a Waypoint ........................ 28
Routes .................................................. 29
Table of Contents
T
Calibrating the Compass ................. 33
Navigating with the Bearing
Pointer ............................................. 33
Course Pointer ................................ 33
Where To? Menu .................................. 34
Finding a Waypoint by Name .......... 34
Finding a Waypoint Near Another
Waypoint ................................... 34
Navigating with Sight 'N Go .................. 34
Elevation Plot ........................................ 34
Calibrating the Barometric
Altimeter .......................................... 35
Navigating to a Point on the Plot ..... 35
Changing the Plot Type .................. 35
Resetting the Elevation Plot ............ 35
Trip Computer ....................................... 35
Resetting the Trip Computer ........... 35
AF
Creating a Route ............................. 29
Editing the Name of a Route ........... 29
Navigating a Saved Route .............. 29
Editing a Route ............................... 29
Reversing a Route .......................... 29
Viewing a Route on the Map ........... 30
Viewing the Active Route ................ 30
Deleting a Route ............................. 30
Tracks ................................................... 30
Recording Track Logs ..................... 30
Viewing Details about the Track ..... 31
Viewing the Elevation Plot of a
Track ............................................... 31
Navigating to the Start of a Track ... 31
Changing the Track Color ............... 31
Saving the Current Track ................ 31
Saving a Location on a Track ........ 31
Clearing the Current Track ............. 32
Deleting a Track ............................. 32
Archiving a Saved Track ................ 32
Archiving Tracks Automatically ...... 32
Sending and Receiving Data
Wirelessly .............................................. 32
Navigation..................................... 32
Map ....................................................... 32
Compass ............................................... 33
Table of Contents
Applications .................................. 36
Setting a Proximity Alarm ...................... 36
Calculating the Size of an Area ............. 36
Viewing the Calendar and Almanacs .... 36
Setting an Alarm ................................... 36
Starting the Countdown Timer .............. 37
Opening the Stopwatch ......................... 37
Satellite Page ........................................ 37
Changing the Satellite View ............ 37
iii
Customizing Your Device............ 37
AF
Customizing the Main Menu ................. 37
Customizing the Data Fields ................. 38
Enabling the Map Data Fields ......... 38
System Settings .................................... 38
Dog Settings ......................................... 38
Contact Settings .................................... 39
Display Settings .................................... 39
Calibrating the Touchscreen ........... 39
Appearance Settings ............................. 39
Setting the Device Tones ...................... 40
Map Settings ......................................... 40
Advanced Map Settings .................. 40
Track Settings ....................................... 41
Routing Settings .................................... 41
Changing the Units of Measure ............ 41
Time Settings ........................................ 42
Position Format Settings ....................... 42
Heading Settings ................................... 42
Altimeter Settings .................................. 42
Marine Map Settings ............................. 43
Device Care .......................................... 44
Cleaning the Device ........................ 44
Cleaning the Screen ....................... 44
Specifications ........................................ 44
Alpha 100 Handheld Device
Specifications .................................. 44
TT 10 Dog Collar Device
Specifications .................................. 45
Battery Information ................................ 45
Long-Term Storage ......................... 45
Maximizing the Battery Life ............. 46
Adjusting the Backlight
Brightness ................................. 46
Adjusting the Backlight
Timeout ..................................... 46
Changing the Dog Collar Device
Update Rate .............................. 47
Changing Your Handheld Update
Rate ........................................... 47
Turning On the Handheld Battery
Save Mode ................................ 47
Adjusting the Map Drawing
Speed ........................................ 47
About Data Management ...................... 47
File Types ....................................... 47
Installing a Memory Card ................ 48
Turning Off GPS ............................. 37
Simulating a Location ...................... 37
Device Information....................... 43
Viewing Device Information .................. 43
Updating the Software .......................... 44
iv
Table of Contents
Connecting the Handheld Device to a
Computer ........................................ 48
Connecting the Collar to a
Computer ........................................ 49
Deleting Files .................................. 49
Disconnecting the USB Cable ......... 49
AF
Accessories and Replacement Parts .... 50
Purchasing Accessories .................. 50
Optional Maps ........................... 50
About Memory Cards ................ 50
Optional Fitness Accessories .... 50
TT 10 Battery Replacement
Instructions ..................................... 51
TT 10 Components .................. 51
Removing the Old Battery ......... 51
Installing the New Battery ......... 52
Replacing the Collar Strap .............. 52
Replacing the VHF Antenna in the
Dog Collar Device .......................... 53
Changing the Fuse in the Vehicle
Power Cable ................................... 54
Data Field Options ................................ 54
Appendix....................................... 50
Index.............................................. 58
Table of Contents
T
AF
WARNING
See the Important Safety and Product
Information guide in the product box for
product warnings and other important
information.
Setting Up the Alpha System
Alpha 100 Handheld Device
AF
Before you can use the Alpha handheld
device and the TT dog collar device, you
must set up the devices.
1 Install the battery in the handheld
device (page 2).
2 Charge the handheld device
(page 3).
3 Charge the collar (page 4).
4 Turn on the devices (page 4).
5 If necessary, add the collar to the
handheld device (page 7).
6 Acquire satellite signals (page 5).
Device Overviews
Getting Started
Getting Started






GPS antenna


Battery cover D-ring
VHF radio antenna
Training keys
Power key
Mounting spine
microSD™ memory card slot (under
battery)
Mini-USB port (under weather cap)
TT 10 Dog Collar Device
•
•
Go to www.garmin.com
/learningcenter.
Go to http://buy.garmin.com, or
contact your Garmin dealer for
information about optional accessories
and replacement parts.
Registering Your Device
Installing the Battery in the
Handheld Device
GPS antenna
Power key
Contact points
VHF antenna
Status LED and flashing beacon LEDs





AF
Help us better support you by completing
our online registration today.
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a
photocopy, in a safe place.
Getting More Information
You can find more information about this
product on the Garmin® website.
• Go to www.garmin.com/alpha.
• Go to www.garmin.com/outdoor.
WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage caused
by battery exposure to extreme heat,
store the device out of direct sunlight.
1 Turn the D-ring counter-clockwise,
and pull up to remove the cover.
Getting Started
2 Locate the metal contacts on the end
hunt. Charging a depleted battery takes
4½ hours.
NOTE: The device will not charge when it
is outside the temperature range of 32°F
to 113°F (0°C to 45°C).
1 Lift the weather cap .
AF
of the lithium-ion battery.
3 Insert the battery into the
compartment, contacts first.
4 Press the battery into place.
5 Replace the battery cover, and turn
the D-ring clockwise.
Charging the Handheld
Device
NOTICE
To prevent corrosion, thoroughly dry the
mini-USB port, the weather cap, and the
surrounding area before charging or
connecting to a computer.
2 Plug the small end of the power cable
into the mini-USB port  on the
device.
3 Plug the other end of the power cable
into an appropriate power source.
You should fully charge the handheld
device completely before using it on a
Getting Started
Charging the Dog Collar
Device
2 Plug the small end of the power cable
into the mini-USB port  on the
NOTICE
To prevent corrosion, thoroughly dry the
contacts on the collar and the surrounding
area before connecting the charging clip.
3 Plug the other end of the power cable
You should fully charge the collar
completely before using it on a hunt.
Charging a depleted battery takes 4½
hours.
1 Snap the charging clip  onto the
collar.
4 Remove the charging clip from the
charging clip.
into an appropriate power source.
The LED is solid red when the collar is
charging.
AF
collar after the LED turns solid green.
If you do not remove the clip, it may
become detached from the collar and
become lost.
Turning On the Devices
•
•
On the handheld device, select .
On the collar, select the Power key.
The collar beeps and the LED blinks
green when the collar is turned on.
Turning Off the Devices
•
•
On the handheld device, hold .
On the collar, hold the Power key
until the LED turns red.
Getting Started
Acquiring Satellite Signals
Locking the Touchscreen
Before you can track your dog with the
track and train system, both the collar and
handheld device must acquire satellite
signals. Acquiring satellites can take a
few minutes.
1 Go outdoors to an open area.
2 Turn on both devices (page 4).
The green LED blinks in intervals of 2 or 3
when the collar has acquired satellite
signals.
You can lock the screen to prevent
inadvertent screen touches.
1 Select .
2 Select .
•
•
•
•
Select
to open the application
drawer.
Select
to open a menu.
Select to close the page and return
to the previous page.
Select to return to the previous
page.
Select to save changes and close
the page.
Select and to scroll.
Select
to search by name.
•
•
Profiles
AF
Using the Touchscreen
•
Unlocking the Touchscreen
1 Select .
2 Select .
Getting Started
Profiles are a collection of settings that
optimize your device based on how you
are using it. For example, the settings and
views are different when you are using
the device with for hunting than when
geocaching.
When you are using a profile and you
change settings such as data fields or
units of measurement, the changes are
saved automatically as part of the profile.
Changing Profiles
When you change activities, you can
change the setup of the handheld device
to suit the activity by changing the profile.
> Profile Change.
1 Select
Dog Collar Device Setup
Creating a Custom Profile
Methods to Add a Dog to a
Handheld Device
If you purchased the collar and the
handheld device separately, you must
add the collar to the handheld device. You
can add up to 20 collars to one handheld
device.
There are three different methods to add
(or pair) the collar to the handheld device:
using MURS/VHF, using the track/train
code, or using ANT+™.
Adding over MURS/VHF : Allows you to
pair after you have placed the collar
into paring mode by pressing the
power key.
This method is helpful when you are
adding a new accessory collar to the
system prior to leaving for the hunt.
See page 7.
Entering the track and train codes :
Allows you to add a dog that you do
not own and that is not in the area.
The dog's owner must determine if
people can only track the dog or can
AF
You can customize your settings and data
fields for a particular activity or trip.
1 Select Setup > Profiles.
2 Select Create New Profile > OK.
The new profile is created with a
default name, and the profile is now
the active profile.
3 Customize the settings as necessary
(page 37).
4 Customize the data fields as
necessary (page 38).
Any changes you make to the settings,
dashboards, and data fields are
automatically saved to the active profile.
2 Select a profile.
Editing a Profile Name
1 Select Setup > Profiles.
2 Select a profile.
3 Select Edit Name.
4 Enter the new name, and select
Dog Collar Device Setup
owner, who can share the dog
wirelessly.
See page 8.
Adding a Dog Over MURS/VHF
1 If necessary, turn off the collar by
holding until the LED turns red.
Hold the Power key until the collar
emits two series of beeps, about 2
seconds.
The LED begins blinking rapidly. The
collar is now ready to be linked, or
paired, with a handheld device.
On the handheld device, select Dog
List > Add Dog.
Bring the collar near the handheld
device, and select Yes.
Enter the name of the dog, and select
> OK.
AF
track and train the dog. This method
requires the dog's owner to find and
communicate the codes to the person
adding the dog.
This method is helpful when you
would like to add a dog before a hunt,
but you are not near the dog. For
example, you are adding another
member of your hunting party's dog to
your handheld device, but you do not
own the dog.
See page 7.
Sharing wirelessly over ANT+ : Allows
you to add a dog that you do not own
and that is not in the area. The dog's
owner must determine if people can
only track the dog or can track and
train the dog. This method does not
require the dog's owner to find and
communicate the codes to the person
adding the dog. The two handheld
devices must be within range (10 feet)
to share data wirelessly.
This method is helpful when you
would like to add a dog during a hunt,
and you are not near the dog. For
example, the dogs have already been
let loose, but you are near the dog
Dog Collar Device Setup
Adding a Dog Using the Track and
Train Codes
Before you can add a dog using the track
and train codes, you must have the dog
owner find the track and train codes
(page 8) and tell them to you.
1 Select Dog List.
2 Select a dog.
3 Select Show Info.
Sharing a Dog Wirelessly Over
ANT+
Before you can share data wirelessly, the
two handheld devices must be within
range (10 feet).
1 Select Dog List.
2 Select the dog to share.
3 Select Share Wirelessly.
4 Select an option:
• To allow the other person to only
track your dog's location with the
map and dog tracking compass,
select Track Only.
• To allow the other person to track
your dog and correct your dog's
behavior, select Track and Train.
5 On the other handheld device, select
Dog List >
> Receive Wirelessly.
AF
If you are not nearby the dog you want to
add or you cannot put the collar into
pairing mode, you can add the dog using
the track and train codes.
1 Select Add Dog.
2 When asked if you are near the collar,
and select No.
3 When asked if you know the track and
train codes, and select Yes.
Enter
the track or train code for the
collar, and select .
The dog’s track code allows you to
view the dog’s location with the map
and dog tracking compass. The dog’s
train code allows you to track and train
the dog.
5 Enter the name of the contact, and
select > OK.
Finding the Dog ID and Track and Train
Codes
You can share a dog’s track code so the
other person can view your dog’s location
with the map and dog tracking compass.
Also, you can share a dog’s train code so
the other person can track your dog and
train (correct) your dog.
Dog Collar Device Setup
Resetting a Dog's Statistics and
Track
You might want to clear the dog statistics
and track before a new hunt.
1 Select Dog List.
2 Select a dog.
3 Select Show Info > Reset > Yes.
You can change the track color of the
dog. It is helpful to have the track color
match the color of the collar strap, if
possible.
1 Select Dog List.
2 Select a dog.
3 Select Show Info.
4 Select the colored square next to the
dog’s name.
5 Select a color.
AF
Changing the Length of the Dog's
Track
Changing the Color of the Dog's
Track
Editing Dog Information
You can adjust the length of the tracks
that are shown on the map.
1 Select Setup > Dogs > Dog Track
On Map.
2 Select an option to show more or less
of the tracks on the map.
Changing the Dog Name
1 Select Dog List.
2 Select a dog.
3 Select Show Info.
4 Select the dog’s name.
5 Enter the name, and select
Dog Collar Device Setup
Changing the Dog Type
1 Select Dog List.
2 Select a dog.
3 Select Show Info > > Change
Dog Type.
4 Select a dog type.
Changing the Dog ID
> OK.
If you are experiencing interference from
other collars or handheld devices in the
area, you might need to change the ID for
the dog.
1 Select Dog List.
Setting Dog Alerts
You can adjust how the handheld device
alerts you to certain actions of the dog.
1 Select Setup > Dogs > Dog Alerts.
2 Select an alert.
3 Select the handheld device action for
the specific alert.
4 Repeat steps 3 and 4 as needed.
Removing a Dog
1 Select Dog List.
2 Select a dog.
10
3 Select Remove.
Attaching the Collar on Your
Dog
CAUTION
To prevent irritation from the contact
points, remove the collar for at least 8
hours out of every 24-hour period.
NOTICE
Remove the charging clip before putting
the collar on the dog. If you do not
remove the clip, it may become detached
from the collar and become lost.
AF
Select a dog.
Select Show Info.
Select
> Change ID.
Select an ID that is not yet assigned to
another device in the area.
If you select an ID that interferes with
devices in the area, you should select
a new ID.
If another handheld device is tracking this
dog, for best results, remove the dog from
the device and add again through the
Dog List (page 7) or share the track and
train codes to add the dog (page 7).
Before you put the collar on the dog, pair
the handheld device and collar (page 7),
and acquire satellite signals (page 5).
1 Select an option:
• If you are training your dog with
the collar, select and install the
appropriate contact points
(page 17).
• If you are not training your dog
with the collar, install the cap over
the contact point locations
(page 17).
Dog Collar Device Setup
5 If the strap is too long, cut off the
excess, leaving at least 3 inches to
spare.
AF
dog's neck, directly behind the dog's
ears.
3 Position the collar with the VHF whip
antenna pointing up, the GPS antenna
facing up, and the LEDs facing
forward.
When using the contact points, they
can be positioned anywhere along the
dog's neck. The best location for the
contact points is in the front of the
neck.
4 Tighten the strap so that it is snug
around the dog's neck.
2 Place the collar in the middle of the
Communication with the Collar
If the collar and handheld device came in the same packaging, they were paired at the
factory. If you are using a collar or handheld device that you purchased separately, add
the collar to the handheld device to establish a communication link between the collar
and handheld device (page 6).
The collar and handheld device must be within range to communicate with each other.
The MURS/VHF radio communication range is up to 9 miles.
The collar and handheld device use radio signals to communicate. Objects in the path of
radio signals degrade the quality of the signals. Keeping an unobstructed line of sight
between the collar and handheld device produces the best communication signal.
Obstructed radio waves result in a poor signal. To achieve the best line-of-sight
Dog Collar Device Setup
11
conditions, move to the highest elevation point in your area (for example, on the top of a
hill).
Best
AF
Good
Poor
Dog Tracking
The Alpha system allows you to track your
dog, up to 9 miles away, using the dog
12
tracking compass or map. The map
displays your location and your dog's
location and tracks. The pointer acts like a
Dog Tracking
AF
Tracking Your Dog on the
Map
compass, pointing in the direction of the
dog's current location.
One Alpha handheld device can track up
to 20 devices (TT dog collar devices and
Alpha handheld devices).
NOTE: Both the collar and the handheld
device must have acquired satellites
before you can track the dog on the
handheld device.
Before you can track a dog or contact on
the map, you must add them to the
handheld device (page 7 and page 23).
You can view the dog's location and other
contacts' locations on the map.
1 Select .
2 If necessary select
and to zoom
in and out of the map.
TIP: If necessary, select to track the
dog using the dog tracking compass
(page 14).
Dog Status Icons
Sitting
Running
On point
Treed
Unknown*
Dog Tracking
13
*The unknown status icon indicates that
the collar has not acquired a satellite
signal and that the handheld device
cannot determine the location of the dog.
Dog Tracking Compass
Navigating to Your Dog
1 Select Dog List.
2 Select the dog.
3 Select Show Info > Go.
To open the dog tracking compass, select
The dog tracking compass is most
accurate when the dog is more than 30
feet (9.1) meters away. When the dog is
less than 30 feet (9.1) away, "Near"
appears.
AF
The map opens.
4 Follow the magenta line to the dog.
5 If necessary, select to track the dog
using the dog tracking compass
(page 14).
The dog tracking compass to view the
direction and distance to your dog. The
dog tracking compass also shows the
dog's status, such as running or on point
(page 13). The color of the pointer
corresponds to the color of the dog track.
14
Tracking with BaseCamp™
BaseStation
The BaseStation feature of BaseCamp
allows you to track your dogs and
contacts in real-time on a computer. For
more information on using BaseCamp,
see the help file in the application.
1 Select Setup > System > BaseCamp
Basestation > Prompted.
2 Lift the weather cap .
Dog Tracking
TIP: To resume tracking, select
Stop Tracking.
Pausing All Dog Tracking
Location Alerts
AF
3 Plug the small end of the USB cable
into the mini-USB connector  on the
If you are moving the dogs during a hunt
and you do not want to record the
transportation of the dogs, you can pause
the tracking of all of the dogs.
1 Select .
2 Select > Stop Tracking.
device.
4 Plug the other end of the USB cable
into an available USB port on the
computer.
5 Open BaseCamp .
6 Follow the on-screen instructions.
Pausing Dog Tracking
You can pause the tracking of a single
dog during a hunt. This can be helpful if
the dog is taking a break.
1 Select Dog List.
2 Select a dog.
3 Select Show Info Stop Tracking.
Dog Tracking
Location alerts notify you when your dogs
or contacts enter or leave a particular
location. You can create a custom
geofence or use a radius around your
current location.
A geofence is a virtual boundary that you
can create using points on the map. The
virtual boundaries of your geofences are
accurate up to approximately 6 ft. (6 m)
Setting a Geofence Alert
You can set up an invisible fence around
an area and receive an alert when a dog
or contact leaves or enters that area.
15
Add Alert > Geofence.
2 Select a point on the map, and select
Use.
3 Repeat step 2 to define a geofence
with up to 5 points.
4 Select .
Setting a Radius Alert
•
•
Select Set Alert Type to set the
way the device notifies you for this
alert.
Select Set Alert Mode to set the
notification to sound on exit,
entrance, or both.
Select Delete to remove the alert.
Dog Training
In addition to tracking your dog, the Alpha
system can help train your dog as well.
The Alpha system can both train and
track your dog from up to 9 miles away.
One Alpha handheld device can track up
to 20 devices (TT dog collar devices and
Alpha handheld devices).
Training information is available at
www.garmin.com/alpha. Research and
investigate the training methods best
suited for you, your dog, and your needs.
This manual will provide some basics
about training, but you are encouraged to
research more.
When used properly, the collar is a very
effective training tool to aid your dog in
reaching its full potential. The use of the
AF
You can receive an alert when a dog or
contact gets within or away from a certain
distance away from you.
1 Select Setup > Location Alerts >
Add Alert > Radius.
2 Select the units of measurement.
3 Enter the radius distance, and select
•
1 Select Setup > Location Alerts >
•
16
Editing Location Alerts
1 Select Setup > Location Alerts.
2 Select an alert.
3 Select an option:
Select Disable to turn off
notifications for this alert.
Dog Training
4 Tighten with the included wrench, but
do not over tighten.
When you put the collar on the dog, make
sure that the contact points are tight
against the neck (page 10).
Removing the Contact Points
When you are not training the dog using
the training keys, remove the contact
points.
1 Use the included wrench to remove
both contact points.
2 Place the cap over the contact point
holes.
AF
collar should be used as part of an overall
training program.
Begin training your dog on a leash,
without the collar. Train your dog how to
heel, sit and stay and come to you. After
the dog shows a grasp of the concepts of
these three basic commands, you begin
training with the collar and the leash.
Finally, when the dog consistently obeys
commands using the leash and collar, you
can remove the leash to train with only
the collar.
Selecting and Installing the
Contact Points
For best results, select the correct contact
points based on your dog's coat.
1 Select the correct contact point length
for your dog's coat type:
• For dogs with thicker coats, use
the longer contact points.
• For dogs with shorter coats, use
the shorter contact points.
2 If necessary, use the included wrench
to remove the contact points.
3 Twist the contact points into the collar.
Dog Training
Setting the Training Keys for
One Dog
Before you can assign the training keys to
a dog, you must add the dog to the
handheld device (page 7).
By default, the training keys are set to the
lowest stimulation setting, with momentary
(M), continuous (C), and tone (T) for each
key. This mode is best for when you are
training just on dog. When you train more
than one dog, it is helpful to us the multidog training mode (page 18).
17
Select Setup > Training.
Select the top of the screen.
Select the intensity level for the keys.
Select .
In this mode, the left key provides
momentary simulation. The center key
provides continuous stimulations. The
right key provides a tone.
(C), or tone (Tone).
6 Repeat with all three keys.
7 If you need to train with more than
three keys, select Insert Page , and
program the additional keys.
8 Select .
Basic Training Commands
You should begin training your dog with a
few basic commands using a leash only.
You should train the three basic
commands in the following order: "heel,"
"sit" and "stay," and "here."
Initially, you should keep the training
sessions short and only train one
command during a session. This way, the
dog is less likely to become confused and
training should progress more quickly.
Pay close attention while training the dog,
so you can begin to learn when to go
faster or slower, and when to take a
break.
With plenty of repetition, consistency,
patience, and a lot of praise, the dog
should begin to obey these commands in
AF
Setting the Training Keys for
Training More Than One Dog
4 Select an intensity level for the key.
5 Select momentary (M), continuous
Before you can assign the training keys to
a dog, you must add the more than one
dog to the handheld device (page 7).
You can change the mode of the training
keys to customize each key for a specific
level and also better train multiple dogs. If
you are training one dog, it is helpful to us
the single-dog training mode (page 17).
1 Select Setup > Training > Training
Buttons > Change Mode.
2 Select the top of the screen directly
under the key you are customizing.
Select
the dog you want to train with
this key.
18
Dog Training
Training to Heel
AF
Before you being training, put a leash on
the dog, and select an area with minimal
distractions.
The first command that you will teach the
dog is the “heel” command.
1 With the dog at your side on a leash,
command the dog to “heel” and begin
walking forward while gently pulling on
the leash.
2 If the dog gets in front of you, repeat
the command “heel,” and move in
another direction or pull back on the
leash.
3 If the dog starts to lag behind you,
lightly tug on the leash to bring the
dog back to your side.
Reward the dog with praise when the dog
obeys the command.
Training to Sit and Stay
Before you being training, put a leash on
the dog, and select an area with minimal
distractions. Before you train to sit and
stay, you should first train to "heel."
The actual command is “sit,” and the
“stay” is implied. When you command the
dog to sit, the dog should stay until you
indicate otherwise.
1 Begin training this command walking
the dog on a leash in the heel
position.
2 Stop walking, pull up on the leash,
and command the dog to "sit."
3 Maintain steady pressure on the leash
until the dog obeys the command.
4 If the dog does not obey and seems
confused, gently push down on the
dog's back above the flank, to make
the dog sit.
Reward the dog with praise when the dog
sits and stays.
just a few short training sessions. Once
the dog demonstrates a grasp of the
concepts of these commands while on a
leash, training with collar stimulations can
be introduced, while keeping the dog on
the leash.
Dog Training
Training to Come Here
Before you being training, put a leash on
the dog, and select an area with minimal
distractions. Before you begin training the
19
T
can begin training with the collar and the
leash.
During the initial stage of collar
introduction, the dog learns that collar
stimulation means the same thing as a
tug on the leash. At first, the dog may be
alarmed by the electronic stimulation. The
key is to be patient and consistent and to
not start off at too high of an intensity. Be
fair and consistent, use repetition and
praise when using the collar as a training
tool.
If the dog does not respond to the
stimulation level you have selected
(page 22), increase the stimulation one
level at a time until you achieve the
appropriate response. Once you achieve
the desired response, you can lower the
stimulation level as long as the dog
maintains consistency.
As the dog becomes more responsive to
the training, you should begin to stimulate
intermittently, giving the dog a "freebie."
This will help keep the dog's attitude
upbeat, and let you know that the dog is
responding to the command rather than
just the collar. As the dog becomes more
proficient with the commands, you can
AF
dog to come here, you should first train
the dog to "heel" and "sit."
Teaching your dog to come here is the
most important command. The "here"
command allows you to maintain control
of your dog and can be used to call your
dog away from a potentially dangerous
situation. This command must be taught
properly.
1 With the dog in a sitting position,
move away to the end of the leash.
You may need to use a long leash to
effectively train "here."
Command
the dog to come “here”
while gently tugging on the leash.
The dog might resist this command. With
repetition and patience, the dog will learn
to obey the command.
Reward the dog with praise when the dog
obeys the command.
Collar Training
Begin training your dog on a leash,
without the dog collar device. After the
dog shows a grasp of the concepts of
"heel," "sit" and "stay," and "here," you
20
Dog Training
T
simulation is 1, and the levels increase
sequentially to 18.
The second style, Traditional, contains 6
numbered levels that each have a high
(Hi), medium (Med), and low (Lo) setting.
Level 1 Lo is going to produce a very
slight stimulation that is hardly perceived.
Level 6 on Hi produces a very strong
stimulation. You should find the correct
training intensity level and then use Lo,
Med, Hi levels as needed for the
situation.
The Alpha system uses momentary (M)
and continuous (C) types of stimulations.
Momentary applies a brief stimulation
when you press the key, regardless of
how long the key is depressed.
Continuous applies stimulation to the dog
the entire time you press the key, for a
maximum of 8 seconds. Your stimulations
should typically be far shorter than 8
seconds. Continuous can be helpful when
first beginning training with your dog.
You can also train using a tone (T). When
you select T for a key, the key press
activates an audible tone instead of
stimulation. Using the tone can be a
helpful training tool.
AF
begin to introduce distractions, such as
rolling a ball in front of the dog or walking
him in the presence of others.
After the dog begins to respond
consistently to the command during collar
training, typically after about 5 or 6
training sessions using the collar, you can
remove the leash and train with just the
collar. Eventually in most training
circumstances, your commands will not
require stimulation when given with the
command. You should only use
stimulation when you need to repeat a
command because the dog did not obey
the first one.
As the dog becomes better trained, you
should decrease the use of collar training.
Continue to have the dog wear the collar
until you feel certain that it is no longer
needed to reinforce known commands.
Abandoning the collar too early can lead
to problems in the future.
Training Intensities and Types
The Alpha system provides two styles of
training stimulation intensity levels. The
default intensity style, Linear, contains 18
simulation levels. The lowest level of
Dog Training
21
T
Teaching the Dog to Heel and Sit with
the Collar
Before you begin training your dog using
the collar, your dog must show a grasp of
the "heel," "sit," and "come" while on the
leash, you must put on the collar
(page 10), and you must find the correct
intensity level (page 22).
When beginning collar training, start with
the "heel" and "sit" commands.
1 With the dog at your side on a leash,
pull up on the leash, and command
the dog to "sit," and also press a
training key briefly.
After the dog begins associating the
collar stimulation with the command,
move on to the "heel" command.
Many dogs indicate that it is time to
make this transition by trying to sit
before being commanded, in an effort
to avoid the stimulation associated
with the command.
2 With the dog at your side on a leash
and with the collar on, command
“heel” and begin walking forward while
gently pulling on the leash.
AF
Choosing the Correct Intensity Level
1 Set the training keys to the lowest
level (page 17).
2 Press a training key.
3 Observe the dog for a reaction, such
as a head shake, neck movement, or
just a change in expression.
Sometimes dogs will vocalize due to
the surprise of the electrical
stimulation. If the dog vocalizes more
than once, the intensity level is too
high for beginning training.
4 If there is no reaction, increase the
intensity level by one level until the
dog has a slight but discernible
reaction to the stimulation.
The intensity level that causes a slight but
discernible reaction is your dog's baseline
level for beginning collar training. You do
not need to, and should not, apply this
intensity selection test again.
After you begin training, the dog’s
performance guides your intensity
selection. As the dog advances in
training, you may need to change the
level depending upon circumstances.
22
Dog Training
training key briefly, repeat the
command “heel”, and move in another
direction or pull back on the leash.
Reward the dog with praise when the dog
obeys commands.
gently tug on the leash, and press a
training key briefly.
The dog might resist this command. With
repetition and patience, the dog will learn
to obey the command.
Reward the dog with praise when the dog
comes when called.
Contact Tracking
AF
Training the Dog to Come Here with
the Collar
Before you begin training your dog to
"come" using the collar, your dog must a
strong grasp of the "heel" and "sit"
commands using the collar, you must put
on the collar (page 10), and you must find
the correct intensity level (page 22).
Teaching your dog to come here is the
most important command. The "here"
command allows you to maintain control
of your dog and can be used to call your
dog away from a potentially dangerous
situation. This command must be taught
properly.
1 With the dog in a sitting position,
move away to the end of the leash.
You may need to use a long leash to
effectively train "here."
2 Command the dog to come “here,”
3 If the dog gets in front of you, press a
Contact Tracking
You can track other hunters so you know
where they are at all times. You can also
send messages to your contacts. One
Alpha handheld device can track up to 20
devices (TT dog collar devices and Alpha
handheld devices).
Adding a Contact Over
MURS/VHF
Before you can add a contact over
MURS/VHF, you should be within 9 miles
of the contact.
You can add fellow hunters to your
handheld device so you can track them
on the map (page 25) and send
messages to them (page 24).
23
>
1 On your handheld device, select
Contacts > Add.
2 When asked if you are near the other
handheld device, and select No.
3 When asked if you know the ID, select
Yes.
4 Select the correct ID for the contact
you are adding.
5 Enter the name of the contact, and
select > OK.
The contact is added to your handheld
device.
If you would like to be added to another
hunter's handheld device using your
contact ID, repeat this procedure using
the hunter's handheld device.
AF
Contacts > Add.
2 Bring the two handheld devices near
each other, and select Yes on your
handheld device.
3 On the contact's handheld device,
select
> Contacts > Pair.
4 On your handheld device, enter the
name of the contact, and select >
OK.
The contact is added to your handheld
device.
If you would like to be added to another
hunter's handheld device using your
contact ID, repeat this procedure using
the hunter's handheld device.
1 On your handheld device, select
Adding a Contact Using the
ID
Before you can add a hunter using the
contact ID, you must have the hunter find
the contact ID (page 25) and send it to
you.
If you are not nearby the hunter you want
to add, you can add the hunter using the
contact ID.
24
Sending a Message to Your
Contacts
> Contacts > Message.
1 Select
2 Select a message.
The message is sent to your contacts with
your name before the message. Anyone
tracking your handheld device receives
the message.
Contact Tracking
1 Select Setup > Contacts > Pairing
Setup > ID.
2 Select a contact ID that is not yet
assigned to another device in the
area.
If you select a contact ID that
interferes with devices in the area, you
should select a new contact ID.
Each time a contact changes their contact
ID, you must update the contact ID in your
handheld device. (page 25).
AF
Tracking a Contact
You can keep track of contacts' locations
using the map.
> Contacts.
1 Select
Select
the
contact.
3 Select Show Info.
4 Select an option:
• To navigate to the contact, select
Go, and follow the magenta line to
the contact.
• To view the contact's location on
the map, select Map.
Finding Your Contact ID
Select Setup > Contacts > Pairing
Setup.
The contact ID for your handheld
device is listed under ID.
Changing Your Contact ID
If you are experiencing interference from
other collars or handheld devices in the
area, you might need to change the
contact ID for your handheld device.
Contact Tracking
Updating a Contact's ID
If a contact has changed their contact ID
(page 25), you can quickly update the
contact ID in your handheld device.
> Contacts.
1 Select
2 Select the contact.
3 Select Show Info.
4 Select > Change ID.
5 Select the contact ID that matches the
contact's new contact ID.
25
Marking a Covey
You can mark a covey location and enter
the estimated number of birds flushed and
the number of birds taken.
1 Select Mark.
2 Select Covey.
3 Enter the number of birds flushed.
4 Enter the number of birds taken.
5 Select OK.
AF
You can perform many tasks that are very
helpful when you are hunting with the
Alpha system.
• Mark your truck's location (page 26).
• Track your dogs (page 13).
• Track your fellow hunters (page 25).
• Mark the location of a covey
(page 26).
• Send messages to your fellow hunters
(page 24).
• Turn on the beacon light on the collar
(page 26).
• Put the collar into rescue mode to
save battery power (page 27).
• Pause tracking while you move the
dogs (page 15).
2 Follow the on-screen instructions.
Hunting with the Alpha
System
Marking Your Truck Location
You can mark the location of the truck, so
you can navigate back to your truck after
the hunt.
1 Select New Hunt.
26
Turning On the Collar
Beacon
You can turn on the LED on the collar at
night to help locate a dog or to warn
drivers if a dog wanders near a road. The
light is visible for up to 100 yards.
1 Select Dog List.
2 Select a dog.
3 Select Show Info.
4 Select > Adjust Collar Light.
5 Select .
Hunting with the Alpha System
•
Select a default location name,
such as Truck or Camp.
3 Select Save.
Marking a Waypoint Using the Map
1 Select .
2 Select the location on the map.
3 Select the information bar along the
top of the screen.
> OK.
4 Select
Editing a Waypoint
AF
You conserve battery power at the end of
a long hunt, or if your dog might get out of
range.
1 Select Dog List.
2 Select a dog.
3 Select Show Info > > Rescue
Mode.
When the collar battery life reaches below
10%, the collar update rate is
automatically changed to once every 2
minutes.
Turning On Rescue Mode
Waypoints
Waypoints, Routes, and
Tracks
Waypoints are locations you record and
store in the device.
Marking Your Current Location
1 Select Mark.
2 Select an option:
•
Select New.
Waypoints, Routes, and Tracks
Before you can edit a waypoint, you must
create a waypoint.
> Waypoint Manager.
1 Select
2 Select a waypoint.
3 Select an item to edit, such as the
name.
4 Enter the new information.
5 Select .
Repositioning a Waypoint to Your
Current Location
You can change the position of a
waypoint. For example, if you move your
vehicle, you can change the location to
your current position.
27
The waypoint location changes to your
current location.
reaches 100%, select Save.
For best results, collect 4 to 8 samples for
the waypoint, waiting at least 90 minutes
between samples.
Projecting a Waypoint
You can create a new location by
projecting the distance and bearing from a
marked location to a new location.
> Waypoint Manager.
1 Select
2 Select a waypoint.
3 Select > Project Waypoint.
4 Enter the bearing, and select .
5 Select a unit of measure.
6 Enter the distance, and select .
7 Select Save.
AF
Moving a Waypoint on the Map
> Waypoint Manager.
1 Select
2 Select a waypoint.
3 Select > Move Waypoint.
4 Select the new location on the map.
5 Select Move.
6 Follow the on-screen instructions.
7 When the confidence status bar
> Waypoint Manager.
1 Select
2 Select a waypoint.
3 Select > Reposition Here.
Increasing the Accuracy of a
Waypoint Location
You can refine a waypoint location for
more accuracy. When averaging, the
device takes several readings at the same
location and uses the average value to
provide more accuracy.
> Waypoint Manager.
1 Select
2 Select a waypoint.
3 Select > Average Location.
4 Move to the waypoint location.
5 Select Start.
28
Deleting a Waypoint
> Waypoint Manager.
1 Select
Select
waypoint.
3 Select > Delete > Yes.
Waypoints, Routes, and Tracks
4 Navigate using the compass
Routes
(page 33) or map (page 32).
Creating a Route
> Route Planner > Create
1 Select
Route > Select First Point.
Select a category.
Select the first point on the route.
Select Use > Select Next Point.
Select and repeat steps 3 through 5 to
add all the points in the route.
6 Select .
•
To view the point on the map,
select View Map.
To change the order of the points
on the route, select Move Up or
Move Down.
To insert an additional point on the
route, select Insert.
The additional point is inserted
before to point you are editing.
To remove the point from the
route, select Remove.
AF
Editing a Route
> Route Planner.
1 Select
2 Select a route.
3 Select Edit Route.
4 Select a point.
5 Select an option:
A route is a sequence of waypoints or
locations that leads you to your final
destination.
•
Editing the Name of a Route
> Route Planner.
1 Select
2 Select a route.
3 Select Change Name.
4 Enter the new name, and select
Navigating a Saved Route
> Route Planner.
1 Select
2 Select a route.
3 Select View Map > Go.
Waypoints, Routes, and Tracks
•
•
Reversing a Route
> Route Planner.
1 Select
2 Select a route.
3 Select Reverse Route.
29
Viewing a Route on the Map
> Route Planner.
1 Select
2 Select a route.
3 Select View Map.
Viewing the Active Route
> Active Route.
1 Select
2 Select a point in the route to view
Tracks
AF
Deleting a Route
> Route Planner.
1 Select
2 Select a route.
3 Select Delete Route > Yes.
additional details.
A track is a recording of your path. The
track log contains information about
points along the recorded path, including
time, location, and elevation for each
point.
Recording Track Logs
> Setup > Tracks > Track
1 Select
Log.
2 Select Record, Do Not Show or
Record, Show On Map.
30
If you select Record, Show On Map,
a line on the map indicates your track.
3 Select Record Method.
4 Select an option:
• To record tracks at a variable rate
that create an optimum
representation of your tracks,
select Auto.
• To record tracks at a specified
distance, select Distance.
• To record tracks at a specified
time, select Time.
Select
Interval.
6 Complete an action:
• If you selected Auto for the
Record Method, select an option
to record tracks more or less often.
NOTE: Using the Most Often interval
provides the most track detail, but fills
up the device memory quicker.
• If you selected Distance or Time
for the Record Method, enter a
value, and select .
As you move with the device turned on, a
track log is created.
Waypoints, Routes, and Tracks
The beginning and the end of the
track are marked by flags.
4 Select the information bar along the
top of the screen.
Information about the track is listed.
the compass (page 33).
Changing the Track Color
> Track Manager.
1 Select
2 Select a track.
3 Select Set Color.
4 Select a color.
Saving the Current Track
> Track Manager.
1 Select
2 Select a track.
3 Select an option:
AF
Viewing the Elevation Plot of a
Track
> Track Manager.
1 Select
2 Select a track.
3 Select Elevation Plot.
3 Navigate using the map (page 32) or
Viewing Details about the Track
> Track Manager.
1 Select
2 Select a track.
3 Select View Map.
Navigating to the Start of a Track
You can navigate back to the beginning of
a track. This can be helpful when finding
your way back to camp or the trail head.
> Track Manager >
1 Select
Current Track > View Map.
2 Select TracBack.
The map page opens with your route
marked with a magenta line.
Waypoints, Routes, and Tracks
•
•
To save the entire track, select
Save Track.
To save part of the track, select
Save Portion, and select the part
to save.
Saving a Location on a Track
> Track Manager.
1 Select
2 Select a track.
3 Select View Map.
4 Select a location along the track.
5 Select the information bar along the
top of the screen.
31
6 Select .
7 Select OK.
Sending and Receiving Data
Wirelessly
Clearing the Current Track
Before you can share data wirelessly, you
must be within 10 feet (3 m) of a
compatible Garmin device.
You can share waypoints, geocaches,
routes, and tracks wirelessly. For
information on sharing dog track and train
codes wirelessly, see page 8.
> Share Wirelessly.
1 Select
2 Select Send or Receive.
3 Follow the on-screen instructions.
Archiving a Saved Track
AF
Deleting a Track
> Track Manager.
1 Select
2 Select a track.
3 Select Delete > Yes.
Select
> Track Manager >
Current Track > Clear Current
Track.
You can archive saved tracks to save
memory space.
> Track Manager.
1 Select
2 Select a saved track.
3 Select Archive.
Archive.
Archiving Tracks Automatically
1 Select Setup > Tracks > Auto
2 Select an option.
32
Navigation
You can navigate a route, a track, to a
waypoint, to a geocache, photo, or any
saved location in the device. You can use
the map or the compass to navigate to
your destination.
Map
The blue triangle represents your
location on the map. As you travel, the
icon moves and leaves a track log (trail).
Waypoint names and symbols appear on
Navigation
the map. When you are navigating to a
destination, your route is marked with a
magenta line on the map.
When the map orientation is Track Up,
objects on the map appear to rotate
around your position. As you travel, the
entire map reorients in the direction you
are facing. You can stabilize the objects
by setting the orientation to North Up
(page 40).
To open the map, select .
temperature changes, or removing the
battery.
> Compass >
1 Select
Calibrate Compass > Start.
2 Follow the on-screen instructions.
Navigating with the Bearing
Pointer
Calibrating the Compass
Course Pointer
AF
Compass
NOTICE
Calibrate the electronic compass
outdoors. To improve heading accuracy,
do not stand near objects that influence
magnetic fields, such as vehicles,
buildings, and overhead power lines.
You should calibrate the compass after
moving long distances, experiencing
Navigation
The handheld device has a 3-axis
compass. You can use a bearing pointer
or a course pointer to navigate to your
destination.
When navigating to a destination, the
bearing pointer points to your destination,
regardless of the direction you are
moving.
1 While navigating to a destination,
select
> Compass.
2 Turn until points toward the top of
the compass, and continue moving in
that direction to the destination.
The course pointer is most useful if you
are navigating on water or where there
are no major obstacles in your path. It
also helps you avoid hazards to either
side of the course, such as shoals or
submerged rocks.
To enable the course pointer, from the
compass, select
> Setup Heading >
Go To Line/Pointer > Bearing.
33
Where To? Menu
You can use the Where To? menu to find
a destination to navigate to. Not all Where
To? categories are available in all areas
and maps.
Finding a Waypoint by Name
> Where To? >
1 Select
Waypoints >
> Spell Search.
Enter
the
name.
3 Select .
34
Navigating with Sight 'N Go
You can point the device at an object in
the distance, lock in the direction, and
then navigate to the object.
> Sight 'N Go.
1 Select
2 Point the device at an object.
3 Select Lock Direction > Set Course.
4 Navigate using the compass
(page 33) or map (page 32).
AF
The course pointer  indicates your
relationship to the course line leading to
the destination. The course deviation
indicator (CDI)  provides the indication
of drift (right or left) from the course. The
scale  refers to the distance between
dots  on the course deviation indicator,
which tell you how far off course you are.
Finding a Waypoint Near Another
Waypoint
> Waypoint Manager.
1 Select
2 Select a waypoint.
3 Select > Find Near Here.
4 Select a category.
The list displays waypoints near the
original waypoint.
Elevation Plot
By default, the elevation plot displays the
elevation for an elapsed time. You can
customize the plot (page 35) and the
data fields (page 38).
Navigation
>
Calibrating the Barometric
Altimeter
Resetting the Elevation Plot
Select
> Elevation Plot >
Reset > Clear Current Track > Yes.
AF
You can manually calibrate the barometric
altimeter if you know the correct elevation
or the correct barometric pressure.
1 Go to a location where the elevation
or barometric pressure is known.
> Elevation Plot >
2 Select
Calibrate Altimeter.
3 Follow the on-screen instructions.
Changing the Plot Type
You can change the elevation plot to
display pressure and elevation over time
or distance.
> Elevation Plot >
1 Select
Change Plot Type.
2 Select an option.
To open the elevation plot, select
Elevation Plot.
Details about the point appear in the
upper-left corner of the plot.
Select
> View Map.
Select the information bar along the
top of the screen.
Select Go.
Navigate using the compass
(page 33) or map (page 32).
Navigating to a Point on the Plot
> Elevation Plot.
1 Select
2 Select an individual point on the plot.
Navigation
Trip Computer
The trip computer displays your current
speed, average speed, maximum speed,
trip odometer, and other helpful statistics.
You can customize the trip computer
layout, dashboard, and data fields
(page 38).
To open the trip computer, select
Trip Computer.
Resetting the Trip Computer
For accurate trip information, reset the trip
information before beginning a trip.
Select
> Trip Computer >
Reset > Reset Trip Data > Yes.
35
Setting a Proximity Alarm
You can view device activity, such as a
waypoint was saved, and almanac
information for the sun and moon, and
hunting and fishing.
1 Select .
2 Select an option:
• To view device activity for specific
days, select Calendar.
• To view the sunrise, sunset,
moonrise, and moonset times,
select Sun and Moon.
• To view the predicted best times
for hunting and fishing, select
Hunt and Fish.
or
to view
3 If necessary, select
a different day.
AF
Proximity alarms alert you when you are
within a specified range of a particular
location.
> Proximity Alarms.
1 Select
2 Select Create Alarm.
3 Select a category.
4 Select a location.
5 Select Use.
6 Enter a radius.
7 Select
When you enter an area with a proximity
alarm, the device will sound a tone.
Viewing the Calendar and
Almanacs
Applications
1 Select
Calculating the Size of an
Area
> Area Calculation >
Start.
2 Walk around the perimeter of the are
you want to calculate.
3 Select Calculate when finished.
36
Setting an Alarm
Select
> Alarm Clock.
Select and to set the time.
Select Turn Alarm On.
Select an option.
Applications
The alarm sounds at the selected time. If
the device is off at the alarm time, the
device turns on and sounds the alarm.
Turning Off GPS
Starting the Countdown
Timer
Simulating a Location
> Satellite >
1 Select
Opening the Stopwatch
Select
> Stopwatch.
Satellite Page
The satellite page shows your current
location, GPS accuracy, satellite
locations, and signal strength.
Changing the Satellite View
> Satellite > .
1 Select
2 Select Track Up to change the view of
the satellites to be oriented with your
current track toward the top of the
screen.
Customizing Your Device
> Use
With GPS Off.
2 Select > Set Location On Map.
3 Select a location.
4 Select Use.
AF
> Alarm Clock >
Timer.
2 Select and to set the time.
3 Select Start Timer.
> Use
1 Select
Select
> Satellite >
With GPS Off.
Customizing Your
Device
Customizing the Main Menu
You can move, add, or delete items in the
main menu.
1 From the main menu, select Setup >
Main Menu.
2 Select a menu item.
3 Select an option.
• Select Move Up or Move Down to
change the location of the item in
the list.
37
Customizing the Data Fields
AF
Before you can customize the data fields
on the map, you must enable the data
fields (page 38).
You can customize the data fields and
dashboards of the map, compass,
elevation plot, and trip computer.
1 Open the page for which you will
change the data fields.
2 Select a data field to customize.
3 Select the new data field.
For data field descriptions, see
page 54.
System Settings
Select Setup > System.
GPS: Sets the GPS to Normal, WAAS/
EGNOS (Wide Area Augmentation
System/European Geostationary
Navigation Overlay Service, or Demo
Mode (GPS off). For more information
about WAAS, go to www.garmin.com
/aboutGPS/waas.html.
BaseCamp Basestation: Sets how the
device connects to BaseCamp when
the device is connected to the
computer.
Select Remove to delete an item
from the list.
TIP: Select
> Restore Defaults to
reset the menu order.
•
Enabling the Map Data Fields
1 Select > > Setup Map >
Dashboard.
2 Select Large Data Fields or Small
Data Fields.
38
Dog Settings
Select Setup > Dogs.
Dog Track On Map: Sets the length
(duration in minutes or hours) of the
dog track on the map. Reducing the
duration of the track shown can
reduce the clutter on the map.
Zoom Map To Dogs: Automatically
zooms the map to show all of the
dogs' locations and your location
unless you manually pan the map.
This feature is very helpful because it
Customizing Your Device
Contact Settings
Calibrating the Touchscreen
The screen does not normally require
calibration, However, if the screen does
not seem to be responding properly,
calibrate the touchscreen.
1 Select Setup > Display > Calibrate
Screen.
2 Follow the on-screen instructions.
AF
Select Setup > Contacts.
Contact Track On Map: Sets the length
of time of the contact track on the
map.
Zoom Map To Contacts: Automatically
zooms out the map to show all of the
contacts' locations and your location
unless you manually pan the map.
Message Alerts: Sets message alerts to
Tone, Vibrate, Tone and Vibrate, or
Message Only.
Pairing Setup: Sets the options your
device uses to track and communicate
with other devices.
Screen Capture: Allows you to save the
image on the device screen.
Battery Save: Saves the battery power
and prolongs the battery life by turning
off the screen when the backlight
times out (page 47).
Calibrate Screen: Aligns the screen to
properly respond to touches
(page 39).
automatically zooms the map to the
level it is most helpful.
Dog Alerts: Sets how you are alerted to
certain actions (page 10).
Display Settings
Select Setup > Display.
Backlight Timeout: Adjusts the length of
time before the backlight turns off.
Customizing Your Device
Appearance Settings
Select Setup > Appearance.
Mode: Sets a light background, a dark
background, or automatically switches
between the two based on the sunrise
and sunset time for your current
location.
39
Setting the Device Tones
Map Settings
Select Setup > Map.
Orientation: Adjusts how the map is
shown on the page. North Up shows
North at the top of the page. Track Up
shows your current direction of travel
toward the top of the page.
Automotive Mode shows an
automotive perspective with the
direction of travel at the top.
Guidance Text: Sets when the guidance
text on the map is shown.
40
Advanced Map Settings
AF
You can customize tones for messages,
keys, warnings, and alarms.
1 Select Setup > Tones.
2 Select a tone for each audible type.
Dashboard: Selects a dashboard to
display on the map. Each dashboard
shows different information about your
route or your location.
Map Information: Enables or disables the
maps currently loaded on the device.
Map Speed: Adjusts the speed at which
the map is drawn. A faster map
drawing speed decreases the battery
life.
Background: Sets the background
image.
Day Highlight Color: Sets the color for
selections made when in day mode.
Night Highlight Color: Sets the color for
selections made when in night mode.
Select Setup > Map.
Auto Zoom: Automatically selects the
appropriate zoom level for optimal use
on your map. When Off is selected,
you must zoom in or out manually.
Detail: Selects the amount of detail
shown on the map. Showing more
detail may cause the map to redraw
more slowly.
Shaded Relief: Shows detail relief on the
map (if available) or turns off shading.
Vehicle: Selects the position icon, which
represents your position on the map.
Zoom Levels: Adjusts the zoom level at
which map items will appear. The map
Customizing Your Device
Track Settings
AF
Select Setup > Tracks.
Track Log: Turns track recording on or
off.
Record Method: Selects a track
recording method. Auto records the
tracks at a variable rate to create an
optimum representation of your tracks.
Interval: Selects a track log recording
rate. Recording points more frequently
creates a more-detailed track, but fills
the track log faster.
Auto Archive: Selects an automatic
archive method to organize your
tracks. Tracks are saved and cleared
automatically based on the user
setting.
Color: Changes the color of the track line
on the map.
Routing Settings
The device calculates routes optimized for
the type of activity you are doing. The
routing settings available vary based on
the activity selected.
Select Setup > Routing.
Activity: Selects an activity for routing.
The device calculates routes
optimized for the type of activity you
are doing.
Route Transitions: Sets how the device
routes from one point on the route to
the next. Available only for some
activities. Distance routes you to the
next point on the route when you are
within a specified distance of your
current point.
Lock On Road: Locks the position icon,
which represents your position on the
map, onto the nearest road.
items will not appear when the map
zoom level is higher than the selected
level.
Text Size: Selects the text size for map
items.
Customizing Your Device
Changing the Units of
Measure
You can customize units of measure for
distance and speed, elevation, depth,
temperature, and pressure.
41
1 Select Setup > Units.
2 Select a measurement type.
3 Select a unit of measure for the
Map Spheroid: Shows the coordinate
system the device is using. The
default coordinate system is WGS 84.
Time Settings
You can customize the compass settings.
Select Setup > Heading.
Display: Sets the type of directional
heading on the compass.
North Reference: Sets the north
reference of the compass.
Go To Line/Pointer: Allows you to use
the Bearing pointer that points in the
direction of your destination, or use
the Bearing that shows your
relationship to the course line leading
to the destination.
Compass: Automatically switches from
an electronic compass to a GPS
compass when you are traveling at a
higher rate of speed for a period of
time.
Calibrate Compass: See page 33.
setting.
AF
Select Setup > Time.
Time Format: Sets the device to show
time in a 12-hour or 24-hour format.
Time Zone: Sets the time zone for the
device. Automatic sets the time zone
automatically based on your GPS
position.
Heading Settings
Position Format Settings
NOTE: Do not change the position format
or the map datum coordinate system
unless you are using a map or chart that
specifies a different position format.
Select Setup > Position Format.
Position Format: Sets the position format
in which a given location reading
appears.
Map Datum: Sets the coordinate system
on which the map is structured.
42
Altimeter Settings
Select Setup > Altimeter.
Customizing Your Device
T
Marine Chart Mode: Selects a nautical
chart or a fishing chart. Nautical
displays various map features in
different colors so that the marine
POIs are more readable and so the
map reflects the drawing scheme of
paper charts. Fishing(requires marine
maps) displays a detailed view of
bottom contours and depth soundings
and simplifies map presentation for
optimal use while fishing.
Appearance: Sets the appearance of
marine navigation aids on the map.
Marine Alarm Setup: Sets alarms for
when you exceed a specified drift
distance while anchored, when you
are off course by a specified distance,
and when you enter water of a specific
depth.
AF
Auto Calibration: Self-calibrates the
altimeter each time the device is
turned on.
Barometer Mode: Variable Elevation
allows the barometer to measure
changes in elevation while you are
moving. Fixed Elevation assumes the
device is stationary at a fixed
elevation. Therefore, the barometric
pressure should only change due to
weather.
Pressure Trending:
Sets how the device records pressure
data. Save Always can be useful
when you are watching for pressure
fronts.
Plot Type: Records elevation changes
over a period of time or distance,
records barometric pressure over a
period of time, or records ambient
pressure changes over a period of
time.
Calibrate Altimeter: See page 35.
Marine Map Settings
Select Setup > Marine.
Device Information
Device Information
Viewing Device Information
You can view the unit ID, software
version, and license agreement.
Select Setup > About.
43
dampened with a mild detergent
solution.
2 Wipe it dry.
Cleaning the Screen
Before you can clean the screen, you
should have a soft, clean, lint-free cloth
and water, isopropyl alcohol, or eyeglass
lens cleaner.
Apply the liquid to the cloth, and gently
wipe the screen with the cloth.
AF
Device Care
Specifications
NOTICE
Do not store the device where prolonged
exposure to extreme temperatures can
occur, because it can cause permanent
damage.
Never use a hard or sharp object to
operate the touch screen, or damage may
result.
Avoid chemical cleaners and solvents that
can damage plastic components.
44
Cleaning the Device
1 Wipe the device with a cloth
Updating the Software
Before you can update the handheld
device or collar software, you must first
connect the handheld device (page 48)
or the collar (page 49) to the computer.
You must update the software on the
handheld device and collar individually.
NOTE: Updating the software does not
erase any of your data or settings.
1 Go to www.garmin.com/products
/webupdater.
2 Follow the on-screen instructions.
Alpha 100 Handheld Device
Specifications
Battery type
Rechargeable,
replaceable lithium-ion
Battery life
Up to 20 hours
Operating
From -4°F to 140°F (from
temperature range -20°C to 60°C)
Charging
From 32°F to 113°F
temperature range (from 0°C to 45°C)
Long-term storage From 32°F to 77°F (from
temperature range 0°C to 25°C)
Device Information
Water resistance
IEC 60529 IPX7
VHF wireless
range
Up to 9 miles
ANT+ Low power
wireless range
About 10 ft. (3 m.)
TT 10 Dog Collar Device
Specifications
Water Resistance Up to 10 m
Battery Information
WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage caused
by battery exposure to extreme heat,
store the device out of direct sunlight.
Do not use a sharp object to remove
batteries.
Rechargeable,
replaceable lithium-ion
Battery Life
20 hours with a 2.5second update rate; 40
hours with a 2-minute
update rate
Operating
Temperature
Range
From -4°F to 140°F (from
-20°C to 60°C)
CAUTION
Contact your local waste disposal
department to properly recycle the
batteries.
Charging
Temperature
Range
From 32°F to 113°F (from
0°C to 45°C)
Long-Term Storage
Short-Term
Storage
Temperature
Range
From -4°F to 104°F (from
-20°C to 40°C)
Long-Term
Storage
Temperature
Range
From -4°F to 77°F (from
-20°C to 25°C)
AF
Device Information
Battery Type
NOTICE
The normal long-term decrease in the
charging capacity of lithium-ion batteries
can be accelerated by exposure to
elevated temperatures. Storing fully
charged devices in a location with a
temperature outside the long-term storage
45
temperature range can significantly
reduce its recharging capacity.
•
When you do not plan to use the
handheld device for several months, the
battery should be removed. Stored data is
not lost when the battery is removed.
When you do not plan to use the collar for
several months, the battery should be
charged to about 50%. The device should
be stored in a cool, dry place with
temperatures are around the typical
household level. After storage, the collar
should be fully recharge before use.
•
•
You can do several things to extend the
life of the batteries in the handheld device
and collar.
• Reduce the backlight brightness
(page 46).
• Reduce the backlight timeout
(page 46).
• Extend the duration for the collar
update rate (page 47).
• Extend the duration for your handheld
update rate (page 47).
46
Adjusting the Backlight Brightness
Extensive use of screen backlighting can
significantly reduce battery life. You can
adjust the backlight brightness to
maximize the battery life.
NOTE: The backlight brightness may be
limited when the battery is low.
1 Select .
2 Use the slider to adjust the backlight
level.
The device may feel warm when the
backlight setting is high.
AF
Maximizing the Battery Life
Put the dog collar device into rescue
mode (page 27).
Use battery save mode (page 47).
Decrease the map drawing speed
(page 47).
Adjusting the Backlight Timeout
You can decrease the backlight timeout to
maximize the battery life.
1 Select Setup > Display > Backlight
Timeout.
Select
an option.
Device Information
About Data Management
You can store files, such as JPEG image
files, on your device. The device has a
memory card slot for additional data
storage.
NOTE: The device is not compatible with
Windows® 95, 98, Me, Windows NT®,
and Mac® OS 10.3 and earlier.
AF
Changing Your Handheld Update Rate
You can select a longer duration for the
update rate to conserve battery power.
1 Select Setup > Contacts > Pairing
Setup > Update Rate.
2 Select a new update rate.
Select Setup > Map > Map Speed >
Normal.
Changing the Dog Collar Device
Update Rate
You can select a longer duration for the
update rate to conserve battery power.
1 Select Dog List.
2 Select a dog.
3 Select Show Info > > Change
Update Rate.
Turning On the Handheld Battery Save
Mode
You can use battery save mode to
prolong the battery life.
Select Setup > Display > Battery
Save > On.
When in battery save mode, the screen
shuts off when the backlight times out.
File Types
The handheld device supports the
following file types:
• Files from BaseCamp. Go to
www.garmin.com/trip_planning.
• JPEG photo files.
• GPX geocache files. Go to
www.opencaching.com.
• GPI custom POI files from the Garmin
POI Loader. Go to www.garmin.com
/products/poiloader.
Adjusting the Map Drawing Speed
Reduce the map drawing speed to
conserve battery power.
Device Information
47
WARNING
Do not use a sharp object to remove the
battery.
(page 2).
Connecting the Handheld Device to
a Computer
NOTICE
To prevent corrosion, thoroughly dry the
mini-USB port, the weather cap, and the
surrounding area before charging or
connecting to a computer.
AF
You can install a microSD memory card in
the handheld device for additional storage
or pre-loaded maps.
1 Turn the D-ring counter-clockwise,
and pull up to remove the cover.
2 Remove the battery.
3 Slide the card holder left and lift up, as
shown in the battery compartment.
6 Slide the card holder right to lock it.
7 Replace the battery and cover
Installing a Memory Card
1 Connect the USB cable to a USB port
on your computer.
Pull
up the weather cap from the mini2
USB port.
3 Plug the small end of the USB cable
into the mini-USB port.
Your device and memory card
(optional) appear as removable drives
in My Computer on Windows
computers and as mounted volumes
on Mac computers.
4 Place the memory card with the gold
contacts facing down.
5 Close the card holder.
48
Device Information
Connecting the Collar to a
Computer
contains important system files that
should not be deleted.
NOTICE
To prevent corrosion, thoroughly dry the
contacts on the collar and the surrounding
area before connecting the charging clip.
on your computer.
Disconnecting the USB Cable
If your device is connected to your
computer as a removable drive or volume,
you must safely disconnect your device
from your computer to avoid data loss. If
your device is connected to your
Windows® computer as a portable
device, it is not necessary to safely
disconnect.
1 Complete an action:
• For Windows computers, select
the Safely Remove Hardware
icon in the system tray, and select
your device.
• For Mac® computers, drag the
volume icon to the Trash.
2 Disconnect the cable from your
computer.
AF
2 Snap the charging clip onto the collar.
3 Plug the small end of the USB cable
1 Connect the USB cable to a USB port
Open the Garmin drive or volume.
If necessary, open a folder or volume.
Select a file.
Press the Delete key on your
keyboard.
into the mini-USB port.
The collar appears as a removable
drive in My Computer on Windows
computers and as a mounted volume
on Mac computers.
Remove the charging clip from the collar
when you are done. If you do not remove
the clip, it may become detached from the
collar and become lost.
Deleting Files
NOTICE
If you do not know the purpose of a file,
do not delete it. Your device memory
Device Information
49
Accessories and
Replacement Parts
Purchasing Accessories
Go to http://buy.garmin.com.
AF
Optional Maps
You can use additional maps with the
device, such as BirdsEye satellite
imagery, BlueChart® g2, and City
Navigator® detailed maps. Detailed maps
may contain additional points of interest,
such as restaurants or marine services.
For more information, go to
http://buy.garmin.com or contact your
Garmin dealer.
Optional Fitness Accessories
You can use optional fitness accessories
including a heart rate monitor or a
cadence sensor with your device. These
accessories use ANT+ wireless
technology to send data to the device.
Before you can use the fitness accessory
with your device, you must install the
accessory according to the instructions
included with the accessory.
Using Optional Fitness Accessories
1 Bring the device within range (3 m) of
the ANT+ accessory.
> Setup > Fitness.
2 Select
3 Select Heart Rate Monitor or Bike
Cadence Sensor.
4 Select Search for New.
5 Customize the data fields to view the
heart rate or cadence data (xref).
Tips for Pairing ANT+ Accessories with
Your Garmin Device
• Verify that the ANT+ accessory is
compatible with your Garmin device.
• Before you pair the ANT+ accessory
with your Garmin device, move 10 m
Appendix
About Memory Cards
You can purchase memory cards from an
electronics supplier, or purchase preloaded Garmin mapping software
(http://www.garmin.com/trip_planning). In
addition to map and data storage, the
memory card can be used to store files
such as maps, images, geocaches,
routes, waypoints, and custom POIs.
50
Appendix
D
•
Appendix
TT 10 Components
•
TT 10 Battery Replacement
Instructions
AF
•
(32.9 feet) away from other ANT+
accessories.
Bring the Garmin device within range
3 m (10 feet) of the ANT+ accessory.
After you pair the first time, your
Garmin device automatically
recognizes the ANT+ accessory each
time it is activated. This process
occurs automatically when you turn on
the Garmin device and only takes a
few seconds when the accessories
are activated and functioning
correctly.
When paired, your Garmin device
receives data from only your
accessory, and you can go near other
accessories.





Back plate
Power key
Connectors
Battery cover
Battery
Removing the Old Battery
Before you replace the battery, you need
a small Phillips screwdriver.
1 Remove the six screws from the outer
edges of the back plate.
51
connectors.
4 Remove the three screws that secure
connectors.
You may need to use a flat
screwdriver to help connect the
connectors.
5 Select the Power key to test the
connections.
When properly connected, a tone is
emitted and the green LED begins to
blink.
TIP: You can turn off the device
before proceeding.
6 Make sure the gasket located inside
the bottom cover is fully seated.
7 Replace the back plate.
8 Replace the six screws to secure to
back plate.
After you install the new battery, charge
the collar completely.
AF
the battery cover.
5 Remove the battery cover and the
battery.
Remember the orientation of the
battery. You must install the new
battery the same way.
After you remove the old battery, contact
your local waste disposal department to
properly recycle the battery.
4 Connect the five-pin and four-pin
2 Pry off the back plate.
3 Disconnect the four-pin and five-pin
Installing the New Battery
Before you replace the battery, you must
remove the old battery (page 51). You
also need a small Phillips screwdriver.
You may need a small flat screwdriver to
connect the connectors.
1 Install the new battery with the
connector on the end nearest the
Power key.
2 Replace the battery cover.
3 Replace the three small screws to
secure the battery cover.
52
Replacing the Collar Strap
Before you replace the collar strap, you
need a small Phillps screwdriver.
1 Remove the four screws from the
back of the GPS antenna case.
Appendix
3 Remove the screw securing the
VHF antenna to the back plate.
AF
antenna guide and the dog device.
You may need to push and pull the
collar strap to properly move it through
all of the loops in the case.
3 Thread the new collar strap through
the dog device and VHF antenna
guide.
4 Place the collar strap in between the
two sides of the GPS antenna.
5 Replace the four screws that secure
the GPS antenna case.
2 Pull the collar strap out of the VHF
Replacing the VHF Antenna in the
Dog Collar Device
Before you replace the VHF antenna in
the collar, you need a small Phillips
screwdriver.
1 Remove the 4 screws  from the Lshaped cover over the VHF antenna.
2 Pry off the L-shaped cover.
4 Pull the length of the antenna from the
Appendix
antenna guide to remove the old
antenna.
Loop the antenna guide around the
collar strap, and thread the new VHF
antenna through the guide.
This helps to point the antenna up.
Replace the screw securing the VHF
antenna to the back plate.
Replace the L-shaped cover over the
VHF antenna.
Replace the 4 screws on the L-shaped
cover.
53
NOTICE
When replacing the fuse, do not lose any
of the small pieces and make sure they
are put back in the proper position. The
vehicle power cable does not work unless
it is assembled correctly.
Accuracy of GPS: The margin of error for
your exact location. For example, your
GPS location is accurate to within +/12 feet (3.65 m ).
Ambient Pressure: The uncalibrated
environmental pressure.
Ascent - Average: The average vertical
distance of ascent since the last reset.
Ascent - Maximum: The maximum rate
of ascent in feet per minute or meters
per minute since the last reset.
Ascent - Total: The total elevation
distance ascended since the last
reset.
Barometer: The calibrated current
pressure.
Battery Level: The remaining battery
power.
Bearing: The direction from your current
location to a destination. You must be
navigating for this data to appear.
Cadence: Revolutions of the crank arm or
strides per minute. Your device must
be connected to a cadence accessory.
54
TIP: You may need to use a coin to
remove the end piece.
Remove the end piece, the silver tip
, and the fuse .
Install a 2 A fast-blow fuse.
Place the silver tip in the end piece.
Screw the end piece back into the
vehicle power cable .
AF
If your device does not charge in your
vehicle, you may need to replace the fuse
located at the tip of the vehicle adapter.
1 Unscrew the end piece .
Data Field Options
Changing the Fuse in the Vehicle
Power Cable
Appendix
T
Elevation: The altitude of your current
location above or below sea level.
Elevation - Maximum: The highest
elevation reached since the last reset.
Elevation - Minimum: The lowest
elevation reached since the last reset.
ETA at Destination: The estimated time
of day you will reach the final
destination (adjusted to the local time
of the destination). You must be
navigating for this data to appear.
ETA at Next: The estimated time of day
you will reach the next waypoint on
the route (adjusted to the local time of
the waypoint). You must be navigating
for this data to appear.
Glide Ratio: The ratio of horizontal
distance traveled to the change in
vertical distance.
Glide Ratio to Dest: The glide ratio
required to descend from your current
position to the destination elevation.
You must be navigating for this data to
appear.
GPS Signal Strength: The strength of the
GPS satellite signal.
Heading: The direction you are moving.
AF
Course: The direction from your starting
location to a destination. Course can
be viewed as a planned or set route.
You must be navigating for this data to
appear.
Depth: The depth of the water. Your
device must be connected to a NMEA
0183 device capable of acquiring the
water depth.
Descent - Average: The average vertical
distance of descent since the last
reset.
Descent - Maximum: The maximum rate
of descent in feet per minute or
meters per minute since the last reset.
Descent - Total: The total elevation
distance descended since the last
reset.
Distance to Destination: The remaining
distance to the final destination. You
must be navigating for this data to
appear.
Distance to Next: The remaining
distance to the next waypoint on the
route. You must be navigating for this
data to appear.
Appendix
55
T
Speed - Moving Avg.: The average
speed while moving since the last
reset.
Speed - Overall Avg.: The average
speed while moving and stopped
since the last reset.
Sunrise: The time of sunrise based on
your GPS position.
Sunset: The time of sunset based on
your GPS position.
Temperature - Water: The temperature
of the water. Your device must be
connected to a NMEA 0183 device
capable of acquiring the water
temperature.
Time of Day: The current time of day
based on your current location and
time settings (format, time zone,
daylight saving time).
Time to Destination: The estimated time
remaining before you reach the
destination. You must be navigating
for this data to appear.
Time to Next: The estimated time
remaining before you reach the next
waypoint in the route. You must be
navigating for this data to appear.
AF
Heart Rate: Your heart rate in beats per
minute (bpm). Your device must be
connected to a compatible heart rate
monitor.
Location (lat/lon): Displays the current
position in the default position format
regardless of the selected settings.
Location (selected): Displays the current
position in the selected position
format.
Odometer: A running tally of distance
traveled for all trips. This total does
not clear when resetting the trip data.
Off Course: The distance to the left or
right by which you have strayed from
the original path of travel. You must
be navigating for this data to appear.
Pointer: An arrow points in the direction
of the next waypoint or turn. You must
be navigating for this data to appear.
Speed: The current rate of travel.
Speed Limit: The reported speed limit for
the road. Not available in all maps and
in all areas. Always rely on posted
road signs for actual speed limits.
Speed - Maximum: The highest speed
reached since the last reset.
56
Appendix
T
Vertical Speed to Dest: The rate of
ascent or descent to a predetermined
altitude. You must be navigating for
this data to appear.
Waypoint at Dest: The last point on the
route to the destination. You must be
navigating for this data to appear.
Waypoint at Next: The next point on the
route. You must be navigating for this
data to appear.
AF
To Course: The direction in which you
must move to get back on the route.
You must be navigating for this data to
appear.
Trip Odometer: A running tally of the
distance traveled since the last reset.
Trip Time - Moving : A running tally of
the time spent moving since the last
reset.
Trip Time - Stopped: A running tally of
the time spent not moving since the
last reset.
Trip Time - Total: A running tally of the
total time spent moving and not
moving since the last reset.
Turn: The angle of difference (in degrees)
between the bearing to your
destination and your current course. L
means turn left. R means turn right.
You must be navigating for this data to
appear.
Velocity Made Good: The speed at
which you are closing on a destination
along a route. You must be navigating
for this data to appear.
Vertical Speed: The rate of ascent or
descent over time.
Appendix
57
Index
backlight 39, 46, 47
BaseCamp 14, 38
battery
charging 3
installing 2
life 40
maximize 47
maximizing 39, 46, 47
replacing 51, 52
saving 27, 47
storage 45
beacon 26
bearing pointer 33
calendar 36
58
data, sharing 32
data fields 38
deleting, all user data 49
device
care 44
registration 2
dog
adding 6–8
alerts 10
collar 27
ID 8, 9
information 9
navigating to 14
settings 38
statistics 9
track and train codes 7, 8
tracking 12–15
tracks 9
training 17, 18
training basics 16,
18–20, 22, 23
training intensity levels
21, 22
type 9
update rate 47
AF
accessories 2, 50
alarm, proximity 36
alarms
clock 36
marine 43
tones 40
alerts
dog 10
location 15, 16
altimeter, calibrating 35
area calculation 36
calibrating
altimeter 35
screen 39
charging
collar 4
handheld 3
cleaning the device 44
collar
battery replacement 51,
52
charging 4
contact points 2, 17
replacing strap 52
VHF antenna 2
collar light 26
compass
calibrating 33
navigating 33
settings 42
computer, connecting 48, 49
contact
adding 23, 24
ID 25
navigating to 25
settings 39
update rate 47
viewing on map 25
contact points 17
course, pointer 33
covey, marking 26
elevation, plot 34, 35
fuse, changing 54
Index
G
geofences 15, 16
GPS, settings 38
navigation, altimeter 35
on-screen buttons 5
hunter. See contact
keys, training 17, 18
line-of-sight radio
communication 11
radio communication 11
registering the device 2
replacement parts 50–53
rescue mode 27
routes
creating 29
deleting 30
editing 29
navigating 29
settings 41
main menu, customizing 37
maps
data fields 38
navigating 32
optional 50
orientation 32, 40
settings 40, 42, 43, 47
zoom 40
marine, alarms setup 43
memory card 1, 48, 50
messages 24
microSD. See memory card
microSD card. See memory
card
pausing dog tracking 15
power cables, changing the
fuse 54
power key 1, 2
product registration 2
profiles 5, 6
proximity alarm 36
Index
time settings 42
tones 40
TracBack 31
tracks, settings 38, 39, 41
trip computer, resetting 35
trip information
resetting information 35
viewing 35
trip planner. See routes
troubleshooting 2
icons 13
AF
settings 38–43
sharing data 32
Sight N' Go 34
software, updating 44
specifications 44, 45
stopwatch 37
satellite signals, acquiring 5
screen
cleaning 44
locking, screen 5
settings 39
units of measure 41
updates, software 44
USB
connector 1
disconnecting 49
mass storage mode 47
transferring 47
user data, deleting 49
VHF antenna 1, 53
59
W
deleting 28
editing 27, 28
projecting 28
saving 26, 27
AF
waypoints
60
Index
T
AF
T
AF
T
AF
www.garmin.com/support
0808 2380000
+44 870 850 1242
1-866-429-9296
43 (0) 3133 3181 0
00 32 2 672 52 54
00 45 4810 5050
00 358 9 6937 9758
00 331 55 69 33 99
0180 5 / 42 76 46 - 880
00 39 02 3669 9699
0800-0233937
815 69 555
00800 4412 454
+44 2380 662 915
00 35 1214 447 460
00 34 902 007 097
00 46 7744 52020
AF
Garmin International, Inc.
1200 East 151st Street
Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park
Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Zangshu 2nd Road, Xizhi Dist.
New Taipei City, 221, Taiwan (R.O.C.)
913-397-8200
1-800-800-1020
© 2012 Garmin Ltd. or its subsidiaries

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2012:07:06 16:42:35-06:00
Creator                         : AH Formatter V5.3 MR3 (5,3,2011,1116) for Windows (x64)
Modify Date                     : 2012:07:16 08:16:02-05:00
Has XFA                         : No
Language                        : EN
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : AH Formatter V5.3 MR3 (5,3,2011,1116) for Windows (x64)
Metadata Date                   : 2012:07:16 08:16:02-05:00
Version ID                      : 1
Document ID                     : uuid:44f8a344-4367-4c6d-b693-baf024ddb42a
Instance ID                     : uuid:34c9eb1a-c3ec-490e-b7b5-4bd24d49b2f3
GTS PDFX Version                : PDF/X-3:2003
Producer                        : Antenna House PDF Output Library 2.6.0 (Windows (x64))
Trapped                         : False
Format                          : application/pdf
Title                           : Untitled
Page Mode                       : UseOutlines
Page Count                      : 73
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IPH-01997

Navigation menu