Garmin 02767 Low Power Transmitter (2400-2483.5 MHz) User Manual
Garmin International Inc Low Power Transmitter (2400-2483.5 MHz)
Garmin >
Contents
- 1. User Manual 1
- 2. User Manual
User Manual
Quick Start Manual.................................. 2
Manuel de démarrage rapide.................. 8
Manuale di avvio rapido........................ 15
Schnellstartanleitung............................. 22
Guía de inicio rápido............................. 30
Manual de Início Rápido....................... 37
DRAFT
Quick Start Manual
Introduction
WARNING
Read all instructions carefully before installing
and using the system. Improper use
could result in serious injury.
See the Important Safety and Product
Information guide in the product box for product
warnings and other important information.
NOTICE
Go to www.garmin.com/ for the
latest information including compatibility,
software updates, and video tutorials.
Tools Included
• 15mm crowfoot adapter for torque wrench
• 2.5 mm hex key
Tools Needed
• 15 mm pedal wrench
• Bike grease
•3 mm hex key
• 4 mm hex key
Installing Components
Preparing
1Confirm the compatibility at
www.garmin.com/.
2Remove the existing parts.
3Clean the threads, and remove old grease.
2 Quick Start Manual
DRAFT
NOTICE
Paring with Your Edge®
Before you can view data on the Edge
device, you must pair the devices.
Pairing is the connecting of ANT+® wireless
sensors. This procedure contains instructions
for the Edge. If you have another
compatible device, see your owner's manual, or
go to www.garmin.com/.
1Bring the Edge device within range (3 m) of
the sensor.
NOTE: Stay 10 m away from other ANT+
sensors while pairing.
2Turn on the Edge device.
3From the home screen, select >
Sensors > Add Sensor > Power.
4 Activate the device a few times.
When the sensor is paired with your Edge
device, the sensor status is Connected. You
Quick Start Manual 5
DRAFT
can customize a data field to display data.
Status LED
Multiple LED flashes indicate a system status
that requires your attention. The red LED
indicates the battery is low.
LED Activity Status
1 green flash every
30 seconds.
The system is
working properly.
2 flashes every 10
seconds.
The device is not
connected.
3 flashes every 10
seconds.
The device is
connected, but it cannot
communicate with the
Edge device.
4 flashes every 10
seconds.
The device is
searching for the other
device.
NOTE: For information
about upgrading,
see the
owner's manual.
5 flashes every 10
seconds.
The installation angle is
not set or cannot be
detected.
6 flashes every 10
seconds.
There is a hardware
installation error.
1 red flash every 30
seconds.
The battery is
low.
6 Quick Start Manual
DRAFT
Troubleshooting
Getting the Owner's Manual
You can get the latest owner's manual from the
web.
1Go to www.garmin.com/support.
2Select Manuals.
3Follow the on-screen instructions to select
your product.
Storage
If you are transporting your device or not using
for an extended period of time, Garmin
recommends removing and storing it in
the product box.
DRAFT
Garmin®, the Garmin logo, ANT+®, and Edge® are
trademarks of Garmin Ltd. or its subsidiaries, registered in
the USA and other countries.
These trademarks may not
be used without the express permission of Garmin.
This product is ANT+® certified. Visit www.thisisant.com
/directory for a list of compatible products and apps.
The FCC ID is located in
the battery compartment.
FCC ID: IPH-02767 M/N: A02767
El número de registro COFETEL/IFETEL puede ser
revisado en el manual a través de la siguiente página de
internet.
© 2015 Garmin Ltd. or its subsidiaries
www.garmin.com/support
Printed in Taiwan
January 2015 190-01867-91_01
DRAFT