Garmin 02933 Low Power Transmitter 2402-2480 MHz User Manual

Garmin International Inc Low Power Transmitter 2402-2480 MHz

Contents

Users Manual 1

Quick Start Manual
DRAFT
Introduction
WARNING
See the Important Safety and Product
Information guide in the product box for product
warnings and other important information.
Always consult your physician before you begin
or modify any exercise program.
Device Overview
ÀTouchscreen Swipe to scroll through
features, data screens, and
menus.
Tap to select.
ÁDevice key Hold to lock the screen and
turn the device on and off.
Press to open and close
the menu.
Press to start and stop the
timer.
Screen Orientation
You can customize the screen orientation in the
device settings on your Garmin Connect
account. The device can display data in
landscape or portrait orientation.
Pairing Your Smartphone
You should pair your device
with a smartphone to access the full features of
the device.
2 Introduction
DRAFT
TIP: You can also set up the device on your
computer using the Garmin Express
application.
NOTE: Unlike other Bluetooth® devices that are
paired from the Bluetooth settings on your
smartphone, your device must
be paired directly through the Garmin Connect
Mobile app.
1Go to www.garminconnect.com
/, and follow the on-
screen instructions to download the Garmin
Connect Mobile app.
2Follow the instructions on your
device during the initial setup to pair
your device with your smartphone.
TIP: If you did not pair your device during
the initial setup, press the device key to
view the menu, and select > Pair
Smartphone.
3Open the Garmin Connect Mobile app, and
follow the on-screen instructions.
Your device automatically synchronizes with
the Garmin Connect Mobile app periodically.
Activity Tracking and Features
Some features require a paired smartphone.
Time and date: Displays the current time and
date. The time and date are set
automatically when the device acquires
satellite signals and when you sync your
device with a smartphone.
Activity tracking: Tracks your daily step count,
floors climbed, distance traveled, calories,
and intensity minutes. The move bar
Introduction 3
DRAFT
displays the amount of time you are
inactive.
Goals: Displays your progress toward your
activity goals. The device learns and
proposes a new step goal for you each
day. You can customize goals for daily
steps, daily floors climbed, and weekly
intensity minutes using your Garmin
Connect account.
Rate: Displays your current rate
and seven-day
average rate. You can tap the
screen to view a graph of your rate.
Notifications: Alerts you to notifications from
your smartphone, including calls, texts,
social network updates, and more, based
on your smartphone notification settings.
Music controls: Provides controls for the
music player on your smartphone.
VIRB® remote: Provides remote controls for a
paired VIRB action camera (sold
separately).
Weather: Displays the current temperature.
You can tap the screen to view a four-day
weather forecast.
Recording a Fitness Activity
You can record a timed activity, which can be
saved and sent to your Garmin Connect
account.
1Press the device key to view the menu.
2Select .
3Select Run, Cardio, or Other.
4 Introduction
DRAFT
TIP: You can change your location from
indoor to outdoor by selecting .
4If your location is set to outdoor, go
outside, and wait while the device locates
GPS satellites.
It may take a few minutes to locate satellite
signals. When satellites are located,
appears solid.
5Press the device key to start the timer.
6Start your activity.
7Swipe left or right to view additional data
screens.
8After you complete your activity, press the
device key to stop the timer.
9Select an option:
Press the device key to resume the
timer.
Select to save the activity and reset
the timer. A summary appears.
Select to delete the activity.
Wearing the Device
Wear the device above
your wrist bone.
NOTE: The device should be snug but
comfortable, and it should not move while
running or exercising.
Introduction 5
DRAFT
Do not damage the sensor on
the back of the device.
See the owner's manual for more
information .
Charging the Device
WARNING
This device contains a lithium-ion battery. See
the Important Safety and Product Information
guide in the product box for product warnings
and other important information.
NOTICE
To prevent corrosion, thoroughly clean and dry
the contacts and the surrounding area before
charging or connecting to a computer. Refer to
the cleaning instructions in the owner's manual.
1Plug the USB cable into a USB port on
your computer.
2Align the charger posts with the contacts
on the back of the device, and press the
charger À until it clicks.
3Charge the device completely.
6 Introduction
DRAFT
Device Information
Temperature Specifications
Operating temperature range: From -10º to
60ºC (from 14º to 140ºF)
Charging temperature range: From 0º to 40ºC
(from 32º to 104ºF)
Getting the Owner's Manual
The owner's manual includes instructions for
using device features and accessing regulatory
information.
Go to www.garmin.com/manuals
/.
Device Information 7
DRAFT
Garmin®, the Garmin logo, ANT+®, VIRB®,
are trademarks of Garmin Ltd. or its subsidiaries,
registered in the USA and other countries. Garmin
Connect and Garmin Express are trademarks of
Garmin Ltd. or its subsidiaries. These trademarks may not
be used without the express permission of Garmin.
The Bluetooth® word mark and logos are owned by
Bluetooth SIG, Inc. and any use of such marks by Garmin
is under license. Advanced analytics by
Firstbeat. Other trademarks and trade names are those of
their respective owners.
This product may contain a library (Kiss FFT) licensed by
Mark Borgerding under the 3-Clause BSD License
(http://opensource.org/licenses/BSD-3-Clause).
M/N: A02933
© 2016 Garmin Ltd. or its subsidiaries
www.garmin.com/support
Printed in Taiwan
March 2016 190-01972-02_0A
DRAFT

Navigation menu